Juan Gomez, M.Sc.

2025

• Düsenberg B., Gomez Bonilla JS., Christ M., Schmidt J., Wirth KE., Peukert W., Bück A.:
  Gas Phase Functionalization of Polymer and Metallic Materials for Powder-Based Additive Manufacturing
  In: Progress in Powder Based Additive Manufacturing, Springer Nature, 2025, p. 37-55 (Springer Tracts in Additive Manufacturing, Vol.Part F386)
  DOI: 10.1007/978-3-031-78350-0_3

2022

• Unger L., Gomez Bonilla JS., Dos Santos DA., Bück A.:
  Particle Residence Time Distribution in a Concurrent Multiphase Flow Reactor: Experiments and Euler-Lagrange Simulations
  In: Processes 10 (2022)
  ISSN: 2227-9717
  DOI: 10.3390/pr10050996

2021

• Dechet M., Gomez Bonilla JS., Grünewald M., Popp K., Rudloff J., Lang M., Schmidt J.:
  A novel, precipitated polybutylene terephthalate feedstock material for powder bed fusion of polymers (PBF): Material development and initial PBF processability
  In: Materials & Design 197 (2021), Article No.: 109265
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2020.109265
• Gomez Bonilla JS., Düsenberg B., Lanyi F., Schmuki P., Schubert DW., Schmidt J., Peukert W., Bück A.:
  Improvement of polymer properties for powder bed fusion by combining in situ PECVD nanoparticle synthesis and dry coating
  In: Plasma Processes and Polymers (2021)
  ISSN: 1612-8850
  DOI: 10.1002/ppap.202000247

2020

• Dechet M., Demina A., Römling L., Gomez Bonilla JS., Lanyi F., Schubert DW., Bück A., Peukert W., Schmidt J.:
  Development of poly(L-lactide) (PLLA) microspheres precipitated from triacetin for application in powder bed fusion of polymers
  In: Additive Manufacturing 32 (2020), Article No.: 100966
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.100966
• Gomez Bonilla JS., Dechet M., Schmidt J., Peukert W., Bück A.:
  Thermal rounding of micron-sized polymer particles in a downer reactor: direct vs indirect heating
  In: Rapid Prototyping Journal (2020)
  ISSN: 1355-2546
  DOI: 10.1108/RPJ-01-2020-0008
• Gomez Bonilla JS., Szymczak T., Zhou X., Schrüfer S., Dechet M., Schmuki P., Schubert DW., Schmidt J., Peukert W., Bück A.:
  Improving the coloring of polypropylene materials for powder bed fusion by plasma surface functionalization
  In: Additive Manufacturing 34 (2020), Article No.: 101373
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101373

2019

• Gomez Bonilla JS., Kletcher R., Lanyi F., Schubert DW., Bück A., Schmidt J., Peukert W.:
  Effect of particle rounding on the processability of polypropylene powder and the mechanical properties of selective laser sintering produced parts
  30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019 (Austin, 12. August 2019 - 14. August 2019)
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85095971435&origin=inward
• Gomez Bonilla JS., Trzenschiok H., Lanyi F., Schubert DW., Bück A., Schmidt J., Peukert W.:
  Tailored modification of flow behavior and processability of polypropylene powders in SLS by fluidized bed coating with in-situ plasma produced silica nanoparticles
  30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019 (Austin, 12. August 2019 - 14. August 2019)
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85095963751&origin=inward
• Hesse N., Dechet M., Gomez Bonilla JS., Lübbert C., Roth S., Bück A., Schmidt J., Peukert W.:
  Analysis of tribo-charging during powder spreading in selective laser sintering: Assessment of polyamide 12 powder ageing effects on charging behavior
  In: Polymers 11 (2019), Article No.: 609
  ISSN: 2073-4360
  DOI: 10.3390/polym11040609
• Schmidt J., Dechet M., Gomez Bonilla JS., Bück A., Peukert W.:
  Process Routes towards Novel Polybutylene Terephthalate – Polycarbonate Blend Powders for Selective Laser Sintering
  30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
  In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
  Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/068 Process Routes towards Novel Polybutylene Terephth.pdf
  URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/068 Process Routes towards Novel Polybutylene Terephth.pdf
• Schmidt J., Dechet M., Gomez Bonilla JS., Hesse N., Bück A., Peukert W.:
  Characterization of Polymer Powders for Selective Laser Sintering
  30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
  In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
  Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
  URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
• Schmidt J., Dechet M., Gomez Bonilla JS., Kloos S., Wirth KE., Peukert W.:
  Novel process routes towards the production of spherical polymer powders for selective laser sintering
  33rd International Conference of the Polymer Processing Society, PPS 2017 (Cancun, MEX, 10. December 2017 - 14. December 2017)
  In: Octavio Manero, Fausto Calderas (ed.): AIP Conference Proceedings 2019
  DOI: 10.1063/1.5121697

2018

• Dechet M., Gomez Bonilla JS., Lanzl L., Drummer D., Bück A., Schmidt J., Peukert W.:
  Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
  In: Polymers 10 (2018), Article No.: 1373
  ISSN: 2073-4360
  DOI: 10.3390/polym10121373

2016

• Hensler T., Firsching M., Gomez Bonilla JS., Woerlein T., Uhlmann N., Wirth KE.:
  Non-invasive investigation of the cross-sectional solids distribution in CFB risers by X-ray computed tomography
  In: Powder Technology 297 (2016), p. 247-258
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2016.04.030
• Schmidt J., Gomez Bonilla JS., Sachs M., Lanzl L., Wudy K., Wirth KE., Drummer D., Peukert W.:
  Production of polybutylene terephtalate glass composite powders and characterization for processing in selective laser sintering
  26th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin, 8. August 2016 - 10. August 2016)