Publications
Expand All
2020
Greiner S. , Drummer D. :Infrared monitoring of modified hatching strategies for laser sintering of polymers 11th CIRP Conference on Photonic Technologies / LANE 2020 (, 6. September 2020 - 10. September 2020 )In: Procedia CIRP 2020 10.1016/j.procir.2020.09.018 Hafenecker J. , Papke T. , Huber F. , Schmidt M. , Merklein M. :Modelling of Hybrid Parts Made of Ti-6Al-4V Sheets and Additive Manufactured Structures Production at the leading edge of technology - Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP) (Dresden (digital) 23. September 2020 - 24. September 2020 )In: Behrens, Bernd-Arno; Brosius, Alexander; Hintze, Wolfgang; Ihlenfeldt, Steffen; Wulfsberg, Jens Peter (ed.): Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP) , Berlin, Heidelberg 2020 10.1007/978-3-662-62138-7_2 Heinl M. , Greiner S. , Wudy K. , Pobel C. , Rasch M. , Huber F. , Papke T. , Merklein M. , Schmidt M. , Körner C. , Drummer D. , Hausotte T. :Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts Measurement Science and Technology 31 2020 ), p. 1-14 ISSN: 1361-6501 10.1088/1361-6501/ab89e2 Lanzl L. , Wudy K. , Drummer D. :The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting Polymer Testing 2020 )ISSN: 0142-9418 10.1016/j.polymertesting.2019.106313 Riedel F. , Düsenberg B. , Schmidt J. , Bück A. , Peukert W. :Production of PBT/PC multi-material particles via a combination of co-grinding and spray-agglomeration for powder bed fusion Procedia CIRP 94 2020 ), p. 100-104 ISSN: 2212-8271 10.1016/j.procir.2020.09.020 Valentin J. , Hübner D. , Stingl M. , Pflueger D. :GRADIENT-BASED TWO-SCALE TOPOLOGY OPTIMIZATION WITH B-SPLINES ON SPARSE GRIDS SIAM Journal on Scientific Computing 42 2020 ), p. B1092-B1114 ISSN: 1064-8275 10.1137/19M128822X
2019
Dechet M. , Goblirsch A. , Romeis S. , Zhao M. , Lanyi F. , Kaschta J. , Schubert DW. , Drummer D. , Peukert W. , Schmidt J. :Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation Chemical Engineering Science 197 2019 ), p. 11-25 ISSN: 0009-2509 10.1016/j.ces.2018.11.051 Dechet M. , Lanzl L. , Werner Y. , Drummer D. , Bück A. , Peukert W. , Schmidt J. :Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 Dechet M. , Lanzl L. , Wilden A. , Sattes MM. , Drummer D. , Peukert W. , Schmidt J. :Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf Drummer D. , Greiner S. , Zhao M. , Wudy K. :A novel approach for understanding laser sintering of polymers Additive Manufacturing 27 2019 ), p. 379-388 ISSN: 2214-7810 10.1016/j.addma.2019.03.012 Gierl B. , Schubert D. , Wörz A. , Drummer D. (ed.):Kunststoffe in tribologischen Systemen - Forschung an der FAU Erlangen-Nürnberg 2019 Greiner S. , Lanzl L. , Wudy K. , Drummer D. :A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers PPS (Polymer Processing Society) (Dresden 26. June 2017 - 29. June 2017 )In: AIP Conference Proceedings 2055 2019 Greiner S. , Wudy K. , Wörz A. , Drummer D. :Thermographic investigation of laser-induced temperature fields in selective Optics and Laser Technology 109 2019 ), p. 569-576 ISSN: 0030-3992 10.1016/j.optlastec.2018.08.010 Hertle S. , Wörz A. , Drummer D. :Analyse der Temperaturführung in der roboterbasierten Materialextrusion mit Polypropylen 16th Rapid.Tech (Erfurt 25. June 2019 - 27. June 2019 )In: Proceedings of the 16th Rapid.Tech Conference 2019 Hesse N. , Dechet M. , Gomez Bonilla JS. , Lübbert C. , Roth S. , Bück A. , Schmidt J. , Peukert W. :Analysis of tribo-charging during powder spreading in selective laser sintering: Assessment of polyamide 12 powder ageing effects on charging behavior Polymers 11 2019 ), Article No.: 609 ISSN: 2073-4360 10.3390/polym11040609 Huber F. , Papke T. , Kerkien M. , Tost F. , Geyer G. , Merklein M. , Schmidt M. :Customized exposure strategies for manufacturing hybrid parts by combining laser beam melting and sheet metal forming Journal of Laser Applications 2019 )ISSN: 1042-346X 10.2351/1.5096115 Hübner D. , Rohan E. , Lukes V. , Stingl M. :Optimization of the porous material described by the Biot model International Journal of Solids and Structures 156-157 2019 ), p. 216-233 ISSN: 0020-7683 10.1016/j.ijsolstr.2018.08.016 Kolb T. , Elahi R. , Seeger J. , Soris M. , Scheitler CJ. , Hentschel O. , Tremel J. , Schmidt M. :Camera signal dependencies within coaxial melt pool monitoring in laser powder bed fusion Rapid Prototyping Journal 2019 )ISSN: 1355-2546 10.1108/RPJ-01-2019-0022 Lanzl L. , Drummer D. :Gefüllte Systeme für die Additive Fertigung: Erhöhung der Reproduzierbarkeit durch innovative Mischstrategien 7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg 12. December 2019 - 12. December 2019 )In: Vom Pulver zum multifunktionalen Bauteil 2019 Lanzl L. , Wudy K. , Greiner S. , Drummer D. :Selective laser sintering of copper filled polyamide 12: powder properties and process behavior Polymer Composites 40 2019 ), p. 1801-1809 ISSN: 0272-8397 10.1002/pc.24940 Papke T. , Huber F. , Geyer G. , Schmidt M. , Merklein M. :Characterisation of the Tensile Bonding Strength of Ti-6Al-4V Hybrid Parts Made by Sheet Metal Forming and Laser Beam Melting 8th Congress of the German Academic Association for Production Technology (WGP) (Aachen 19. November 2018 - 20. November 2018 )https://www.springer.com/us/book/9783030034504 Papke T. , Huber F. , Hafenecker J. , Schmidt M. , Merklein M. :Hybride Bauteile, Werkzeuge und Prozessketten – Anwendungen der Kombination aus Additiver Fertigung und Umformtechnik 7. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg Rasch M. , Heberle J. , Dechet M. , Bartels D. , Gotterbarm M. , Klein L. , Gorunov A. , Schmidt J. , Körner C. , Peukert W. , Schmidt M. :Grain Structure Evolution of Al–Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties Materials 13 2019 )ISSN: 1996-1944 10.3390/ma13010082 Rasch M. , Roider C. , Kohl S. , Strauß J. , Maurer N. , Nagulin KY. , Schmidt M. :Shaped laser beam profiles for heat conduction welding of aluminium-copper alloys Optics and Lasers in Engineering 115 2019 ), p. 179-189 ISSN: 0143-8166 10.1016/j.optlaseng.2018.11.025 https://authors.elsevier.com/a/1YA5XWipgSdRX Schmidt J. , Dechet M. , Gomez Bonilla JS. , Hesse N. , Bück A. , Peukert W. :Characterization of Polymer Powders for Selective Laser Sintering 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf Stichel T. , Brachmann C. , Raths M. , Dechet M. , Schmidt J. , Peukert W. , Frick T. , Roth S. :Electrophotographic Multilayer Powder Pattern Deposition for Additive Manufacturing JOM Journal of the Minerals, Metals and Materials Society 2019 )ISSN: 1047-4838 10.1007/s11837-019-03965-z Wudy K. , Drummer D. :Aging effects of polyamide 12 in selective laser sintering: Molecular weight distribution and thermal properties Additive Manufacturing 25 2019 )ISSN: 2214-7810 10.1016/j.addma.2018.11.007 Wudy K. , Schmidt J. , Lanzl L. , Zhao M. , Jaksch A. , Dechet M. , Hesse N. , Drummer D. , Peukert W. :Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization 7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg 12. December 2019 - 12. December 2019 )In: Dietmar Drummer (ed.): Vom Pulver zum multifunktionalen Bauteil 2019 Wörz A. , Drummer D. :Untersuchung zur Bedeutung der Schichtanzahl für Struktur und Eigenschaften von LS-Kunststoffbauteilen Technomer 2019 (Chemnitz 7. November 2019 - 8. November 2019 )Wörz A. , Hertle S. , Drummer D. :Mechanisches Verhalten lasergesinterter PA12 Bauteile bei variierenden statischen Belastungsgeschwindigkeiten und -dauern 16th Rapid.Tech (Erfurt 25. June 2019 - 27. June 2019 )In: Proceedings of the 16th Rapid.Tech Conference 2019 Wörz A. , Wudy K. , Drummer D. :Understanding the influence of energy-density on the layer-dependent part properties in laser-sintering of PA12 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, Texas In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
2018
Beer O. , Merklein C. , Gerhard D. , Hentschel O. , Rasch M. , Schmidt M. :Processing of the Heat Resistant Bearing Steel M50NiL by Selective Laser Melting - Verarbeitung des warmfesten Lagerstahls M50NiL mittels selektiven Laserstrahlschmelzens aus dem Pulverbett Journal of Heat Treatment and Materials 73 2018 ), p. 187–201 ISSN: 1867-2493 10.3139/105.110358 https://www.hanser-elibrary.com/doi/pdf/10.3139/105.110358 Dechet M. , Gomez Bonilla JS. , Lanzl L. , Drummer D. , Bück A. , Schmidt J. , Peukert W. :Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding Polymers 10 2018 ), Article No.: 1373 ISSN: 2073-4360 10.3390/polym10121373 Dechet M. , Zhao M. , Drummer D. , Peukert W. , Schmidt J. :Herstellung und Charakterisierung von Pulvern für das selektive Laserstrahlschmelzen von Kunststoffen aus Flüssigphasenprozessen am Beispiel von PA11 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg 12. December 2019 - 12. December 2019 )In: Dietmar Drummer (ed.): 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung , Erlangen 2018 Drexler M. , Greiner S. , Lexow M. , Lanzl L. , Wudy K. , Drummer D. :Selective laser melting of polymers: Influence of powder coating on mechanical part properties Journal of Polymer Engineering 38 2018 ), p. 667-674 ISSN: 0334-6447 10.1515/polyeng-2017-0133 Greiner S. , Lanzl L. , Zhao M. , Wudy K. , Drummer D. :Influence of powder bed surface on part properties produced by selective laser beam melting of polymers 7th International Conference on Additive Technologies - iCAT 2018 (Maribor 10. October 2018 - 11. October 2018 )In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018 Greiner S. , Soldner D. , Jaksch A. , Zhao M. , Mergheim J. , Steinmann P. , Wudy K. , Drummer D. :Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen 6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg 13. December 2018 - 13. December 2018 )Hagen J. , Rasch M. , Kohl S. , Schmidt M. :Geometry dependent microstructures: bug or feature? 10th CIRP Conference on Photonic Technologies, LANE 2018 (Furth 3. September 2018 - 6. September 2018 )In: Michael Schmidt (ed.): Procedia CIRP 2018 10.1016/j.procir.2018.08.024 Hentschel O. , Siegel L. , Scheitler CJ. , Huber F. , Junker D. , Gorunow A. , Schmidt M. :Processing of AISI H11 Tool Steel Powder Modified with Carbon Black Nanoparticles for the Additive Manufacturing of Forging Tools with Tailored Mechanical Properties by Means of Laser Metal Deposition (LMD) Metals 2018 )ISSN: 2075-4701 10.3390/met8090659 Huber F. , Papke T. , Kerkien M. , Tost F. , Geyer G. , Merklein M. , Schmidt M. :Customized Exposure Strategies for Manufacturing Hybrid Parts by Combining Laser Beam Melting and Sheet Metal Forming Huber F. , Papke T. , Scheitler CJ. , Hanrieder L. , Merklein M. , Schmidt M. :In Situ Formation of a Metastable β-Ti Alloy by Laser Powder Bed Fusion (L-PBF) of Vanadium and Iron Modified Ti-6Al-4V Metals 8 2018 ), Article No.: 1067 ISSN: 2075-4701 10.3390/met8121067 https://www.mdpi.com/2075-4701/8/12/1067 Hübner D. , Gotterbarm M. , Kergaßner A. , Köpf J. , Pobel C. , Markl M. , Mergheim J. , Steinmann P. , Körner C. , Stingl M. :Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization iCAT 2018 (Maribor 10. October 2018 - 11. October 2018 )In: Proceedings of 7th International Conference on Additive Technologies 2018 Karg M. , Munk A. , Ahuja B. , Backer MV. , Schmitt JP. , Stengel C. , Kuryntsev SV. , Schmidt M. :Expanding particle size distribution and morphology of aluminium-silicon powders for Laser Beam Melting by dry coating with silica nanoparticles Journal of Materials Processing Technology 264 2018 ), p. 155-171 ISSN: 0924-0136 10.1016/j.jmatprotec.2018.08.045 Karg M. , Rasch M. , Schmidt K. , Spitzer S. , Karsten TF. , Schlaug D. , Biaciu CR. , Gorunov A. , Schmidt M. :Laser Alloying Advantages by Dry Coating Metallic Powder Mixtures with SiOx Nanoparticles Nanomaterials 8 2018 ), p. 1-29 ISSN: 2079-4991 10.3390/nano8100862 https://www.mdpi.com/2079-4991/8/10/862 Kloos S. , Dechet M. , Peukert W. , Schmidt J. :Production of spherical semi-crystalline polycarbonate microparticles for Additive Manufacturing by liquid-liquid phase separation Powder Technology 335 2018 ), p. 275-284 ISSN: 0032-5910 10.1016/j.powtec.2018.05.005 Kolb T. , Gebhardt P. , Schmidt O. , Tremel J. , Schmidt M. :Melt pool monitoring for laser beam melting of metals: assistance for material qualification for the stainless steel 1.4057 10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth In: 74 2018 https://www.sciencedirect.com/science/article/pii/S2212827118308424 Kolb T. , Mahr A. , Huber F. , Tremel J. , Schmidt M. :Qualification of channels produced by laser powder bed fusion: Analysis of cleaning methods, flow rate and melt pool monitoring data Additive Manufacturing 2018 )ISSN: 2214-7810 10.1016/j.addma.2018.11.026 Kolb T. , Müller L. , Tremel J. , Schmidt M. :Melt pool monitoring for laser beam melting of metals: inline-evaluation and remelting of surfaces 10th CIRP Conference on Photonic Technologies (LANE 2018) In: 74 2018 10.1016/j.procir.2018.08.052 http://www.sciencedirect.com/science/article/pii/S2212827118308369 Köpf J. , Rasch M. , Meyer A. , Markl M. , Schmidt M. , Körner C. :3D grain growth simulation and experimental verification in laser beam melting of IN718 10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth 4. September 2018 - 6. September 2018 )In: Procedia CIRP 74 (2018) 2018 https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf Lanzl L. , Greiner S. , Wudy K. , Drummer D. :Glass-Filled Polypropylene-Systems for Enhancing Reproducibility during Selective Laser Beam Melting and Effect of the Mixing Strategy on Powder Properties 7th International Conference on Additive Technologies - iCAT2018 (Maribor 10. October 2018 - 11. October 2018 )In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018 Osmanlic F. , Wudy K. , Laumer T. , Schmidt M. , Drummer D. , Körner C. :Modeling of Laser Beam Absorption in a Polymer Powder Bed Polymers 10 2018 )ISSN: 2073-4360 10.3390/polym10070784 Papke T. , Dubjella P. , Butzhammer L. , Huber F. , Petrunenko O. , Klose D. , Schmidt M. , Merklein M. :Influence of a bending operation on the bonding strength for hybrid parts made of Ti-6Al-4V 10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth 3. September 2018 - 6. September 2018 )In: Procedia CIRP 2018 10.1016/j.procir.2018.08.113 Papke T. , Junker D. , Huber F. , Hentschel O. , Schmidt M. , Merklein M. :Verknüpfung additiver Fertigung und Umformtechnik in Form hybrider Bauteile und Werkzeuge. Fachtagung Werkstoffe und Additive Fertigung (Potsdam 25. April 2018 - 26. April 2018 )In: Witt G (ed.): Tagungsband Fachtagung Werkstoffe und Additive Fertigung 2018 Papke T. , Junker D. , Schmidt M. , Kolb T. , Merklein M. :Bulk Metal Forming of Additively Manufactured Elements 5th International Conference on New Forming Technology (ICNFT 2018) In: 190 2018 https://www.matec-conferences.org/articles/matecconf/abs/2018/49/matecconf_icnft2018_03002/matecconf_icnft2018_03002.html Pflug L. , Spinola M. , Keimer A. :NONLOCAL SCALAR CONSERVATION LAWS ON BOUNDED DOMAINS AND APPLICATIONS IN TRAFFIC FLOW SIAM Journal on Mathematical Analysis 50 2018 ), p. 6271-6306 ISSN: 0036-1410 10.1137/18M119817X Wudy K. , Drummer D. :Infiltration Behavior of Thermosets for Use in a Combined JOM Journal of the Minerals, Metals and Materials Society 2018 ), p. 1-8 ISSN: 1047-4838 10.1007/s11837-018-3226-0 Wudy K. , Drummer D. :Curing beharior of thermosets for the use in a combined selective laser sintering process 9th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin 13. August 2018 - 15. August 2018 )In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 2018 Wudy K. , Greiner S. , Zhao M. , Drummer D. :Selective laser beam melting of polymers: In situ and offline measurements for process adapted thermal characterization Procedia CIRP 74 2018 ), p. 238-243 ISSN: 2212-8271 10.1016/j.procir.2018.08.102 Wörz A. , Drummer D. :Understanding hatch-dependent part properties in SLS International Solid Freeform Fabrication Symposium (Austin 13. August 2018 - 15. August 2018 )In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium 2018 Wörz A. , Wudy K. , Drummer D. :Einfluss des Schichtaufbaus auf das mechanische Verhalten von selektiv lasergesinterten Bauteilen Rapid Tech 2018 (Erfurt 5. June 2018 - 7. June 2018 )Zhao M. , Greiner S. , Wudy K. , Schmidt J. , Peukert W. , Drummer D. :Pulverschüttungsanalyse für das selektive Laser-Sintern mittels Computertomographie Rapid Tech (Erfurt 5. June 2018 - 7. June 2018 )In: Proceedings of the 15th Rapid.Tech Conference 2018 Zhao M. , Wudy K. , Drummer D. :Crystallization Kinetics of Polyamide 12 during Selective Laser Sintering Polymers 10 2018 )ISSN: 2073-4360 10.3390/polym10020168
2017
Alexeev I. , Wu J. , Karg M. , Zalevsky Z. , Schmidt M. :Determination of laser beam focus position based on secondary speckles pattern analysis Applied Optics 56 2017 ), p. 7413-7418 ISSN: 2155-3165 10.1364/AO.56.007413 Butzhammer L. , Dubjella P. , Huber F. , Schaub A. , Aumüller M. , Baum A. , Petrunenko O. , Merklein M. , Schmidt M. :Experimental investigation of a process chain combining sheet metal bending and laser beam melting of Ti-6Al-4V Lasers in Manufacturing LIM 2017 (München 26. June 2017 - 29. June 2017 )Dubjella P. , Merklein M. :Influence of Warm Bending on the Surface Topography of Titanium Alloy Ti-6Al-4V Procedia Engineering 183 2017 ), p. 23-30 ISSN: 1877-7058 10.1016/j.proeng.2017.04.006 Greiner S. , Lanzl L. , Wudy K. , Drexler M. , Drummer D. :Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen Rapid Tech 2017 (Erfurt 20. June 2017 - 22. June 2017 )In: Proceedings of Rapid Tech 2017 2017 Greiner S. , Wudy K. , Lanzl L. , Drummer D. :Selective laser sintering of polymer blends: Bulk properties and process behavior Polymer Testing 64 2017 ), p. 136-144 ISSN: 0142-9418 10.1016/j.polymertesting.2017.09.039 Heinl M. , Galovskyi B. , Bayer F. , Laumer T. , Hausotte T. :Influence of laser power fluctuations on the quality of additive manufactured workpieces In: Wissenschaftliche Gesellschaft Lasertechnik e.V. (WLT) (ed.): Lasers in Manufacturing (LiM) 2017 Huber F. , Rasch M. , Butzhammer L. , Karg M. , Schmidt M. :Strahlschmelzen von Metallen mit unterschiedlichen Intensitäten und Belichtungsstrategien 5. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg 12. December 2017 - 12. December 2017 )In: 5. Industriekolloquium des SFB 814 2017 Karg M. , Ahuja B. , Wiesenmayer S. , Kuryntsev S. , Schmidt M. :Effects of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2219 (AlCu6Mn) additively manufactured by Laser Beam Melting in powder bed Micromachines 8 2017 ), p. 1-11 ISSN: 2072-666X 10.3390/mi8010023 http://www.mdpi.com/2072-666X/8/1/23/pdf Kolb T. , Beisser R. , Schmidt P. , Tremel J. , Schmidt M. :Safety in additive manufacturing: Fine dust measurements for a process chain in Laser beam melting of metals RTejournal - Forum für Rapid Technologie 14 2017 )ISSN: 1614-0923 https://www.rtejournal.de/ausgabe-14-2017/4626 Lanzl L. , Wudy K. , Greiner S. , Drummer D. :Selektives Laserstrahlschmelzen von glasfasergefüllten Polymersystemen 5. Industriekolloquium des SFB 814 (Nürnberg 12. December 2017 - 12. December 2017 )In: 5. Industriekolloquium des SFB 814 2017 Rasch M. , Huber F. , Butzhammer L. , Merz C. , Schmidt M. :Einfluss der Belichtungsstrategie auf die oberflächennahe Porosität beim Laserstrahlschmelzen im Pulverbett Rapid.Tech – International Trade Show & Conference for Additive Manufacturing (Erfurth 20. June 2017 - 22. June 2017 )In: M. Kynast, M. Eichmann , G. Witt (ed.): PROCEEDINGS OF THE 14TH RAPID.TECH CONFERENCE ERFURT 2017 10.3139/9783446454606.019 http://www.hanser-elibrary.com/doi/pdf/10.3139/9783446454606.019 Riedlbauer DR. , Scharowsky T. , Singer R. , Steinmann P. , Körner C. , Mergheim J. :Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V International Journal of Advanced Manufacturing Technology 2017 )ISSN: 0268-3768 10.1007/s00170-016-8819-6 http://link.springer.com/article/10.1007/s00170-016-8819-6 Segets D. , Lin W. , Schmidt J. , Peukert W. , Mahler M. , Schindler T. , Unruh T. , Meyer B. :Influence of Tail Groups during Functionalization of ZnO Nanoparticles on Binding Enthalpies and Photoluminescence Langmuir 33 2017 ), p. 13581-13589 ISSN: 0743-7463 10.1021/acs.langmuir.7b03079 Wudy K. , Hinze M. , Ranft F. , Drummer D. , Schwieger W. :Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents Journal of Materials Processing Technology 246 2017 ), p. 136-143 ISSN: 0924-0136 10.1016/j.jmatprotec.2017.03.011 Wurm M. , Möst T. , Bergauer B. , Rietzel D. , Neukam FW. , Cifuentes SC. , von Wilmowsky C. :In-vitro evaluation of Polylactic acid (PLA) manufactured by fused deposition modeling Journal of Biological Engineering 11 2017 ), p. 29 ISSN: 1754-1611 10.1186/s13036-017-0073-4 Wörz A. , Wudy K. , Drummer D. , Wegner A. , Witt G. :Comparison of long-term properties of laser sintered and injection molded polyamide 12 parts Journal of Polymer Engineering 2017 )ISSN: 0334-6447 10.1515/polyeng-2017-0227
2016
Ahuja B. , Schaub A. , Junker D. , Karg M. , Tenner F. , Plettke R. , Merklein M. , Schmidt M. :A ROUND ROBIN STUDY FOR LASER BEAM MELTING IN METAL POWDER BED South African Journal of Industrial Engineering 27 2016 ), p. 30-42 ISSN: 1012-277X 10.7166/27-2-1201 http://sajie.journals.ac.za/pub/article/view/1201/682 Greifenstein J. , Stingl M. :Simultaneous parametric material and topology optimization with constrained material grading Structural and Multidisciplinary Optimization 2016 ), p. 1-14 ISSN: 1615-147X 10.1007/s00158-016-1457-7 Heinl M. , Galovskyi B. , Hausotte T. :Surface and dimensional measurements of additive manufactured workpieces In: iCAT 2016 (ed.): Proceedings of 6th International Conference on Additive Technologies 2016 , p. 267-273 ISBN: 978-961-285-537-6 Hertle S. , Drexler M. , Drummer D. :Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion Macromolecular Materials and Engineering 301 2016 ), p. 1482-1493 ISSN: 1439-2054 10.1002/mame.201600259 Junker D. , Fedorov A. , Hentschel O. , Schmidt M. , Merklein M. :Connection strength of additive manufactured tool elements to the substrate 10.4028/www.scientific.net/KEM.716.389 Karg M. , Ahuja B. , Schmidt J. , Winzer B. , Wirth KE. , Peukert W. , Schmidt M. :Laser Beam Melting in Powder Bed of nonspherical aluminium microparticles dry coated with metal nanoparticles 6th International Conference on Additive Technologies (Nürnberg 29. November 2016 - 30. November 2016 )In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings [Elektronski vir] / 6th International Conference on Additive Technologies iCAT2016 , Ljubljana 2016 http://icat.si Lanzl L. , Greiner S. , Wudy K. , Drummer D. :Selective laser sintering of a polypropylene polyamide 12 blend: Bulk and component properties iCAT 2016 (Nürnberg 29. November 2016 - 30. November 2016 )In: Proceedings of 6th International Conference on Additive Technologies 2016 Lanzl L. , Wudy K. , Drexler M. , Drummer D. :Laser-high-speed-DSC: Process-oriented thermal analysis of PA 12 in selective laser sintering Physics Procedia 83 2016 ), p. 981-990 ISSN: 1875-3892 10.1016/j.phpro.2016.08.103 Merklein M. , Dubjella P. , Schaub A. , Butzhammer L. , Schmidt M. :Interaction of Additive Manufacturing and Forming 6th International Conference on Additive Technologies iCAT 2016 (Nürnberg 29. November 2016 - 30. November 2016 )In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings of 6th International Conference on Additive Technologies 2016 Sachs M. , Friedle M. , Schmidt J. , Peukert W. , Wirth KE. :Characterization of a downer reactor for particle rounding Powder Technology 2016 )ISSN: 0032-5910 10.1016/j.powtec.2017.01.006 Schaub A. , Ahuja B. , Butzhammer L. , Osterziel J. , Schmidt M. , Merklein M. :Additive Manufacturing of Functional Elements on Sheet Metal Physics Procedia 83 2016 ), p. 797-807 ISSN: 1875-3892 10.1016/j.phpro.2016.08.082 http://www.sciencedirect.com/science/article/pii/S1875389216301894 Scheitler CJ. , Rothfelder R. , Rasch M. , Ahuja B. , Schmidt M. , Merklein C. , Beer O. :Laser beam melting of M50NiL: Influence of inert gas flow on resulting part properties International Conference on Additive Technologies - icat 2016 (Nürnberg 29. November 2016 - 30. November 2016 )In: Igor Drstvenšek, Dietmar Drummer and Michael Schmidt. (ed.): 6th INTERNATIONAL CONFERENCE ON ADDITIVE TECHNOLOGIES - iCAT 2016 - PROCEEDINGS 2016 Schmidt J. , Gomez Bonilla JS. , Sachs M. , Lanzl L. , Wudy K. , Wirth KE. , Drummer D. , Peukert W. :Production of polybutylene terephtalate glass composite powders and characterization for processing in selective laser sintering 26th Annual International (Austin 8. August 2016 - 10. August 2016 )Schmidt J. , Sachs M. , Fanselow S. , Wirth KE. , Peukert W. :Herstellung und Funktionalisierung neuartiger Pulverwerkstoffe für die additive Fertigung Chemie Ingenieur Technik 88 2016 )ISSN: 0009-286X 10.1002/cite.201650354 Schmidt J. , Sachs M. , Fanselow S. , Zhao M. , Romeis S. , Drummer D. , Wirth KE. , Peukert W. :Optimized polybutylene terephthalate powders for selective laser beam melting Chemical Engineering Science 156 2016 ), p. 1-10 ISSN: 0009-2509 10.1016/j.ces.2016.09.009 Schmidt J. , Sachs M. , Zhao M. , Fanselow S. , Wudy K. , Drexler M. , Drummer D. , Wirth KE. , Peukert W. :A novel process for production of spherical PBT powders and their processing behavior during laser beam melting 31st International Conference of the Polymer Processing Society, PPS 2015 (Jeju Island Korea 7. June 2015 - 11. June 2015 )In: 31st International Conference of the POLYMER PROCESSING SOCIETY 2016 10.1063/1.4942343 Wudy K. , Drexler M. , Lanzl L. , Drummer D. :Analysis of time dependent thermal properties for high rates in selective laser sintering iCAT 2016 (Nürnberg 29. November 2016 - 30. November 2016 )In: Proceedings of 6th International Conference on Additive Technologies 2016 Wudy K. , Drummer D. :Aging Behavior of Polyamide 12 Interrelation between Bulk Characteristics and Part Properties 27th Solid Freeform Fabrication Symposium (Austin, Tx 8. August 2016 - 10. August 2016 )In: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2016 Wudy K. , Lanzl L. , Drummer D. :Selective laser sintering of filled polymer systems: Bulk properties and laser beam material interaction Physics Procedia 83 2016 ), p. 991-1002 ISSN: 1875-3892 10.1016/j.phpro.2016.08.104
2015
Ahuja B. , Karg M. , Schmidt M. :Additive Manufacturing in Production – Challenges and Opportunities Laser 3D Manufacturing II (The Moscone Center San Francisco California 7. February 2015 - 12. February 2016 )In: Henry Helvajian, Alberto Piqué, Martin Wegener, Bo Gu (ed.): Proc. of SPIE Vol. 9353, 935304 2015 10.1117/12.2082521 http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2208227&resultClick=1 Ahuja B. , Schaub A. , Karg M. , Schmidt R. , Merklein M. , Schmidt M. :High Power Laser Beam Melting of Ti-6Al-4V on Formed Sheet Metal to achieve Hybrid structures Laser 3D Manufacturing II (The Moscone Center San Francisco California 7. February 2015 - 12. February 2015 )In: Henry Helvajian, Alberto Piqué, Martin Wegener, Bo Gu (ed.): Proc. of SPIE Vol. 9353, 93530X 2015 10.1117/12.2082919 http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=2208237&resultClick=1 Burger A. , Costa RD. , Lobaz V. , Peukert W. , Hirsch A. , Guldi DM. :Layer-by-Layer Assemblies of Catechol-Functionalized TiO2 Nanoparticles and Porphyrins through Electrostatic Interactions Chemistry - A European Journal 21 2015 ), p. 5041-5054 ISSN: 0947-6539 10.1002/chem.201405039 Drexler M. , Drummer D. , Wudy K. :Einfluss des Pulverauftragsprozesses auf den selektiven Strahlschmelzprozess thermoplastischer Kunststoffe RapidTech 2015 (Erfurt 10. June 2015 - 11. June 2015 )In: Tagungsband / Digital Proceedings RapidTech 2015 2015 Drexler M. , Drummer D. , Wudy K. :Interaction between Time Dependent Exposure Strategies and Part Positioning within Selective Laser Melting Process of Plastics International Journal of Recent Contributions from Engineering, Science & IT 3 2015 ), p. 13-19 ISSN: 2197-8581 10.3991/ijes.v3i1.4286 Drexler M. , Lexow M. , Drummer D. :Selective Laser Melting of Polymer Powder - Part Mechanics as Function of Exposure Speed Physics Procedia 78 2015 ), p. 328-336 ISSN: 1875-3892 10.1016/j.phpro.2015.11.047 Drummer D. , Drexler M. , Wudy K. :Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing 7th World Congress on Particle Technology (WCPT7) (Beijing In: New Paradigm of Particle Science and Technology Proceedings of The 7th World Congress on Particle Technology 2015 Drummer D. , Drexler M. , Wudy K. :Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing Procedia Engineering 102 2015 ), p. 1908-1917 ISSN: 1877-7058 10.1016/j.proeng.2015.01.331 Drummer D. , Drexler M. , Wudy K. :Derivation of heating rate dependent exposure strategies for the selective laser melting of thermoplastic polymers PPS-30 (Cleveland In: AIP Conference Proceedings 2015 10.1063/1.4918513 Drummer D. , Harder R. , Witt G. , Wegner A. , Wudy K. , Drexler M. :Long-term Properties of Laser Sintered Parts of Polyamide 12 - Influence of Storage Time and Temperature on the Aging Behavior International Journal of Recent Contributions from Engineering, Science & IT 3 2015 ), p. 20-27 ISSN: 2197-8581 10.3991/ijes.v3i1.4289 Drummer D. , Medina Hernandez M. , Drexler M. , Wudy K. :Polymer powder production for laser melting through immiscible blends Procedia Engineering 102 2015 ), p. 1918-1925 ISSN: 1877-7058 10.1016/j.proeng.2015.01.332 Drummer D. , Wudy K. , Drexler M. :Selektives Strahlschmelzen von Polymer-Blends: Prozess- und Werkstoffanforderungen RapidTech 2015 (Erfurt In: Tagungsband / Digital Proceedings RapidTech 2015 2015 Drummer D. , Wudy K. , Drexler M. :Modelling of the Aging Behavior of Polyamide 12 Powder during Laser Melting Process 30th Annual Meeting of the Polymer Processing Society (Cleveland, USA In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2015 10.1063/1.4918514 Galovskyi B. , Hausotte T. :Testing Workpieces for Selective Laser Sintering Achieving Precision Tolerances in Additive Manufacturing (Raleigh, North Carolina 26. April 2015 - 29. April 2015 )In: Proceedings of ASPE 2015 Spring Topical Meeting , Raleigh, North Carolina, USA 2015 Galovskyi B. , Hausotte T. , Drummer D. , Harder R. :In-line layer wise measurements for selective laser sintering process XXI IMEKO World Congress “Measurement in Research and Industry” (Prague, Czech Republic 30. August 2015 - 4. September 2015 )Karg M. , Ahuja B. , Hentschel O. , Schmidt M. :Local Hardness Variation of Ti50Cu32Ni15Sn3 Processed by Laser Beam Melting (LBM) International Journal of Recent Contributions from Engineering, Science & IT 3 2015 ), p. 34-38 ISSN: 2197-8581 10.3991/ijes.v3i1.4293 http://online-journals.org/index.php/i-jes/article/view/4293/3411 Karg M. , Ahuja B. , Schaub A. , Schmidt J. , Sachs M. , Mahr A. , Wiesenmayer S. , Wigner L. , Wirth KE. , Peukert W. , Merklein M. , Schmidt M. :Effect of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2618 additively manufactured by Laser Beam Melting in powder bed Lasers in Manufacturing Conference 2015 (Messe München 22. June 2015 - 25. June 2015 )In: Proceedings of Laser in Manfacturing Conference 2015 2015 http://www.wlt.de/lim/Proceedings/Stick/PDF/Contribution146_final.pdf http://www.wlt.de/lim/Proceedings/Stick/4.html Karg M. , Ahuja B. , Schmidt M. :Strategy towards tailored high-performance metal materials for additive manufacturing 1st International Symposium on Additive Manufacturing, IWS Dresden (Fraunhofer IWS Dresden Winterbergstr. 28 01277 Dresden 25. February 2015 - 26. February 2015 )http://www.iws.fraunhofer.de/en/events/archive_2015/additive_manufacturing_2015/proceedings.html Launhardt M. , Drexler M. , Drummer D. :Rapid-Manufacturing-Process for Elastomeric Components International Journal of Recent Contributions from Engineering, Science & IT 3 2015 )ISSN: 2197-8581 10.3991/ijes.v3i2.4593 Loderer A. , Fleßner M. , Galovskyi B. , Hausotte T. :SLS unter die Lupe genommen - Eine Analyse der Genauigkeit von selektiven Lasersinterprozessen wt Werkstattstechnik - Online 105 2015 ), p. 72-77 ISSN: 1436-4980 Schmidt J. , Sachs M. , Blümel C. , Winzer B. , Toni F. , Wirth KE. , Peukert W. :A novel process route for the production of spherical SLS polymer powders 30th International Conference of the Polymer Processing Society, PPS 2014 (Cleveland,Ohio 6. June 2014 - 12. June 2014 )In: American Institute of physics (ed.): Proceedings of PPS-30 : the 30th International Conference of the Polymer Processing Society : conference papers : 6-12 June 2014, Cleveland, Ohio, USA 2015 10.1063/1.4918518 Wudy K. , Drummer D. :Aging behavior of polyamide 12 during selective laser melting process - influence on mechanical properties ANTEC 2015 (Orlando, USA 23. March 2015 - 25. March 2015 )In: Society of Plastics Engineers (ed.): SPE Proceedings ANTEC 2015 Zhao M. , Drummer D. , Wudy K. , Drexler M. :Untersuchung des Schmelz- und Sinterprozesses von Polyamid 12 beim selektiven Strahlschmelzen RapidTech 2015 (Erfurt In: Tagungsband / Digital Proceedings RapidTech 2015 2015 Zhao M. , Drummer D. , Wudy K. , Drexler M. :Sintering Study of Polyamide 12 Particles for Selective Laser Melting International Journal of Recent Contributions from Engineering, Science & IT 3 2015 ), p. 28-33 ISSN: 2197-8581 10.3991/ijes.v3i1.4290
2014
Ahuja B. , Karg M. , Nagulin K. , Schmidt M. :Laser beam melting of high strength al-uminium alloys EN AW-6061 and EN AW-6082 5th International Conference on Additive Technologies iCAT (Hotel Vienna Mercure Westbahnhof Wien 16. October 2014 - 17. October 2014 )In: Igor Drstvensek (ed.): Proceedings of 5th International Conference on Additive Technologies , Ljubljana 2014 Ahuja B. , Karg M. , Nagulin K. , Schmidt M. :Fabrication and Characterization of High Strength Al-Cu alloys Processed Using Laser Beam Melting in Metal Powder Bed Physics Procedia 56 2014 ), p. 135-146 ISSN: 1875-3892 10.1016/j.phpro.2014.08.156 http://www.sciencedirect.com/science/article/pii/S1875389214003010 Ahuja B. , Schaub A. , Karg M. , Lechner M. , Merklein M. , Schmidt M. :Developing LBM process parameters for Ti-6Al-4V thin wall structures and determining the corresponding mechanical characteristics Physics Procedia 56 2014 ), p. 90-98 ISSN: 1875-3892 10.1016/j.phpro.2014.08.102 http://www.sciencedirect.com/science/article/pii/S1875389214002478 Drexler M. , Wudy K. , Drummer D. :Selektives Strahlschmelzen von Kunststoffen - Ganzheitliche Prozessbetrachtung zur gezielten Optimierung von Bauteileigenschaften 3. Industriekolloquium des SFB 814 (Nürnberg In: 3. Industriekolloquium des SFB 814 , Erlangen 2014 Drummer D. , Drexler M. , Wudy K. :Derivation of Heating Rate Dependent Exposure Strategies for the Selective Laser Melting of Thermoplastic Polymers 30th Annual Meeting of the Polymer Processing Society (Cleveland, USA In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2014 Drummer D. , Drexler M. , Wudy K. :Resulting melt-pool-shape during selective beam melting of thermoplastics as function of energy input parameters Fraunhofer Direct Digital Conference 2014 (Berlin In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference , Aachen 2014 Drummer D. , Drexler M. , Wudy K. :Influence of Energy Input on Degradation Behavior of Plastic Components Manufactured by Selective Laser Melting 5th International Conference on Additive Technologies - iCAT2014 (Vienna 8. September 2014 - 11. September 2014 )In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 10.1016/j.phpro.2014.08.160 Drummer D. , Drexler M. , Wudy K. :Impact of Heating Rate During Exposure of Laser Molten Parts on the Processing Window of PA12 Powder Physics Procedia 56 2014 ), p. 184-192 ISSN: 1875-3892 10.1016/j.phpro.2014.08.162 Drummer D. , Harder R. , Witt G. , Wegner A. , Wudy K. , Drexler M. :Long-term properties of laser sintered parts of polyamide 12 - Influence of storage time and temperature on the ageing behaviour 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 Drummer D. , Wudy K. , Drexler M. :Selective laser melting of polyamide 12: A holistic approach for the modeling of the aging behavior 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 Drummer D. , Wudy K. , Drexler M. :Influence of Energy Input on Degradation Behavior of Polyamide 12 during selective Laser Melting Process Fraunhofer Direct Digital Conference 2014 (Berlin In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference , Aachen 2014 Galovskyi B. , Hausotte T. , Drummer D. , Zhao M. :Model of a Measurement Artifact for Additive Manufacturing 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014 Galovskyi B. , Hausotte T. , Loderer A. , Hartmann W. :Optische In-Line-Prüftechnik zur Qualitätssicherung beim selektiven Strahlschmelzen von Kunststoffen Von der Innovation zum Produkt (Nürnberg 4. December 2014 - 4. December 2015 )In: Drummer, Dietmar (ed.): 3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung , Erlangen 2014 Greifenstein J. , Stingl M. :Simultaneous Material and Topology Optimization Based on Topological Derivatives In: Christian Pötzsche, Clemens Heuberger, Barbara Kaltenbacher, Franz Rendl (ed.): System Modeling and Optimization Berlin Heidelberg Springer 2014 , p. 118-127 (IFIP Advances in Information and Communication Technology, Vol.443) 10.1007/978-3-662-45504-3_11 Karg M. , Ahuja B. , Kuryntsev S. , Gorunov A. , Schmidt M. :Processability of high strength Aluminium-Copper alloys AW-2022 and 2024 by Laser Beam Melting in Powder Bed 25th Solid Freeform Fabrication Symposium (AT&T Executive Conference Center Austin Texas 4. August 2014 - 6. August 2014 )In: Dave Bourrell (ed.): Proceedings of the 25th Annual International Solid Freeform Symposium 2014 http://sffsymposium.engr.utexas.edu/sites/default/files/2014-036-Karg.pdf http://sffsymposium.engr.utexas.edu/sites/default/files/2014-036-Karg.pdf Karg M. , Ahuja B. , Kuryntsev S. , Schmidt M. :Laser Beam Melting of Amorphous Metals International Conference on Additive Technologies iCAT (Hotel Vienna Mercure Westbahnhof Wien 16. October 2014 - 17. October 2014 )In: Igor Drstvensek (ed.): Proceedings of 5th International Conference on Additive Technologies 2014 http://icat.rapiman.net Loderer A. , Galovskyi B. , Hartmann W. , Hausotte T. :Qualifying measuring systems by using Six Sigma Key Engineering Materials 637 2014 ), p. 37-43 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.637.37 Riedlbauer DR. , Drexler M. , Drummer D. , Steinmann P. , Mergheim J. :Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12 Computational Materials Science 93 2014 ), p. 239-248 ISSN: 0927-0256 10.1016/j.commatsci.2014.06.046 Sachs M. , Hentschel O. , Schmidt J. , Karg M. , Schmidt M. , Wirth KE. :Production of Al/Cu-Particles and their potential for processing by Laser Beam Melting (LBM) Physics Procedia 56 2014 ), p. 125-134 ISSN: 1875-3892 10.1016/j.phpro.2014.08.155 http://www.sciencedirect.com/science/article/pii/S1875389214003009 Schaub A. , Ahuja B. , Karg M. , Schmidt M. , Merklein M. :Fabrication and Characterization of Laser Beam Melted Ti-6Al-4V Geometries on Sheet Metal Direct Digital Manufacturing Conference DDMC 2014 (Grand Hotel Esplanade Berlin 12. March 2014 - 13. March 2014 )In: Axel Demmer (ed.): Proceedings DDMC 2014 Fraunhofer direct digital Manufacturing conference 2014 http://www.ddmc-fraunhofer.de/ Schäfer S. , Srikantharajah R. , Klaumünzer M. , Lobaz V. , Voigt M. , Peukert W. :Self-alignment of zinc oxide nanorods into a 3D-smectic phase Thin Solid Films 562 2014 ), p. 659--667 ISSN: 0040-6090 10.1016/j.tsf.2014.03.025 Wudy K. , Drummer D. , Drexler M. :Influence of degradation behavior of polyamid 12 powders in laser sintering process on produced parts 29th Annual Meeting of the Polymer Processing Society (Nürnberg In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2014 10.1063/1.4873873 Zhao M. , Drummer D. , Wudy K. , Drexler M. :Sintering Study of Polyamide 12 Particles for Selective Laser Melting 5th International Conference on Additive Technologies - iCAT2014 (Vienna In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana 2014
2013
Drexler M. , Drummer D. , Wudy K. :Effects of the powder bulk density on the porosity of laser molten thermoplastic parts 29th Annual Meeting of the Polymer Processing Society (Nürnberg In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013 Drexler M. , Drummer D. , Wudy K. , Riedlbauer DR. , Steinmann P. , Mergheim J. :Selektives Laserstrahlschmelzen von Kunststoffen - Modellierung des Temperaturhaushaltes und Einfluss auf resultierende Bauteileigenschaften 2. Industriekolloquium des SFB 814 (Nürnberg In: 2. Industriekolloquium des SFB 814 2013 Drummer D. , Drexler M. , Wudy K. :Einfluss der Scangeschwindigkeit auf die Bauteileigenschaften pulver- und strahlbasierter Verfahren RTejournal - Forum für Rapid Technologie 7 2013 ), p. - ISSN: 1614-0923 Galovskyi B. , Fleßner M. , Loderer A. , Hausotte T. :Systematic form deviations of additive manufactured parts - methods of their identification and correction The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (Krakau - Kielce, Polen 11. September 2013 - 13. September 2013 )In: Abstracts of the ISMQC 2013 2013 Karg M. , Laumer T. , Schmidt M. :Additive Manufacturing of Gradient and Multimaterial Components International Conference on Competitive Manufacturing COMA 2013 (Wallenberg Centre (STIAS) Stellenbosch 30. January 2013 - 1. February 2013 )In: Van der Merwe, A., Dimitrov, D. (ed.): Archive of COMA 2013 2013 http://conferences.sun.ac.za/index.php/doie/coma13/paper/viewFile/370/303 http://conferences.sun.ac.za/index.php/doie/coma13/paper/viewFile/370/303 Loderer A. , Galovskyi B. , Hartmann W. , Hausotte T. :Measurement strategy for a production-related multi-scale inspection of formed work pieces 11th Global Conference on Sustainable Manufacturing - GCSM 2013 (Berlin 23. September 2013 - 25. September 2013 )In: Seliger, G. (ed.): Proceedings of the 11th Global Conference on Sustainable Manufacturing - Innovative Solutions , Berlin 2013 http://www.gcsm.eu/Papers/56/4.4_38.pdf Loderer A. , Galovskyi B. , Hartmann W. , Hausotte T. :Qualifying measuring systems by using Six Sigma The 11th International Symposium on Measurement and Quality Control - 11th ISMQC (Krakau - Kielce 11. September 2013 - 13. September 2013 )In: Abstracts of the ISMQC 2013 2013 10.4028/www.scientific.net/KEM.637.37 http://www.imeko.org/publications/tc14-2013/IMEKO-TC14-2013-22.pdf Schmidt B. , Leugering G. , Stingl M. , Hüttner B. , Agaimy A. , Döllinger M. :Material and shape optimization for multi-layered vocal fold models using transient loadings Journal of the Acoustical Society of America 134 2013 ), p. 1261-1270 ISSN: 0001-4966 10.1121/1.4812253 Wudy K. , Drexler M. , Drummer D. :Strategien zur Realisierung konstanter Pulver- und Bauteileigenschaften beim selektiven Laserstrahlschmelzen von Kunststoffen 2. Industriekolloquium des SFB 814 (Nürnberg In: 2. Industriekolloquium des SFB 814 2013 Wudy K. , Drummer D. , Drexler M. :Characterization of polymer materials and powders for selective laser melting 29th Annual Meeting of the Polymer Processing Society (Nürnberg In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013 Wudy K. , Drummer D. , Drexler M. :Langzeitverhalten von Polyamid 12 Pulver zur Verarbeitung mittels selektivem Laserstrahlschmelzen Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz In: Technomer 2013 2013 Wudy K. , Kühnlein F. , Drummer D. , Drexler M. :Materialalterung beim Rapid Manufacturing - Alterungsverhalten von Kunststoffpulvern beim selektiven Strahlschmelzen GIT Labor-Fachzeitschrift 2013 ), p. 372-375 ISSN: 0016-3538
2012
Bauereiß A. , Ribeiro Parteli EJ. , Riedlbauer DR. , Stingl M. :Numerische Simulation pulver- und strahlbasierter additiver Fertigungsprozesse Industriekolloqium des Sonderforschungsbereichs 814 – Additive Fertigung Drexler M. , Kühnlein F. , Drummer D. :Effects on the density distribution of SLS-parts Laser Assisted Net Shape Engineering 7 (Fürth In: Physics Procedia 39 2012 10.1016/j.phpro.2012.10.066 Drexler M. , Kühnlein F. , Drummer D. :Influence of powder coating on part density as a function of coating parameters 4th International Conference on Additive Technologies (Maribor In: 4th International Conference on Additive Technologies 2012 Drexler M. , Kühnlein F. , Drummer D. :Modeling of Transient Thermal Conditions During Selective Laser Melting 1st International Conference on Thermo-Mechanically Graded Materials (Kassel In: 1st International Conference on Thermo-Mechanically Graded Materials 2012 Drummer D. , Cifuentes SC. , Rietzel D. :Suitability of PLA/TCP for Fused Deposition Modeling Rapid Prototyping Journal 18 2012 ), p. - ISSN: 1355-2546 10.1108/13552541211272045 Drummer D. , Kühnlein F. , Drexler M. :Degradation behaviour of PA 12 powders in laser sintering iCAT 2012 - 4th International Conference on Additive Technologies (Maribor In: Proceedings of the 4th International Conference on Additive Technologies (ICAT 2012) 2012 Drummer D. , Kühnlein F. , Meister S. , Drexler M. :Investigations on the degradation behaviour of PA 12 plastic powders - Influence of high temperatures on the moleculare weight 13th Annual International RAPDASA 2012 Conference (South Africa In: Proceedings of the 13th RAPDASA annual international Conference 2012 Hartmann W. , Hausotte T. , Drummer D. , Wudy K. :Anforderungen und Randbedingungen für den Einsatz optischer Messsysteme zur In-Line-Prüfung additiv gefertigter Bauteile Rapid.Tech 2012 (Erfurt In: RTejournal - Forum für Rapid Technologie 2012 http://www.rtejournal.de/ausgabe9/3327/ Hausotte T. , Hartmann W. , Timmermann M. , Galovskyi B. :Optische Messsysteme zur In-Line-Prüfung im additiven Fertigungsprozess Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung - Zukunft individuell gestalten (Nürnberg 6. December 2012 )In: Dietmar Drummer (ed.): Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2012 Karg M. :Laserstrahlschmelzen von Metallen - Aktuelle Entwicklungen im Bereich der Additiven Fertigung 15. Seminar µLEF 2012 Laser in der Elektronikproduktion und Feinwerktechnik (Stadthalle Fürth 28. February 2012 - 29. February 2012 )In: Michael Schmidt, Stephan Roth, Philipp Amend (ed.): Tagungsband des 15. Seminars µLEF 2012 , Bamberg 2012 http://www.lef.info/ Kühnlein F. , Rietzel D. , Drummer D. :Investigations of the directional mechanical properties and reasons of fracture of Mask Sintered PA12-components Zeitschrift Kunststofftechnik 8 2012 ), p. 106-137 ISSN: 1864-2217 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84857846193&origin=inward Kühnlein F. , Rietzel D. , Drummer D. :Untersuchung der richtungsabhängigen mechanischen Eigenschaften und Bruchursachen maskengesinterter PA12-Bauteile Zeitschrift Kunststofftechnik 8 2012 ), p. 106-137 ISSN: 1864-2217 Laumer T. , Karg M. , Schmidt M. :Laser beam melting of multi-material components Physics Procedia 39 2012 ), p. 518-525 ISSN: 1875-3892 10.1016/j.phpro.2012.10.068 http://www.sciencedirect.com/science/article/pii/S1875389212025953 Lobaz V. , Klupp Taylor R. , Peukert W. :Highly magnetizable superparamagnetic colloidal aggregates with narrowed size distribution from ferrofluid emulsion Journal of Colloid and Interface Science 374 2012 ), p. 102-110 ISSN: 0021-9797 10.1016/j.jcis.2012.01.057 Nachtrab S. , Kapfer S. , Rietzel D. , Drummer D. , Madadi M. , Arns C. , Kraynik AM. , Schröder-Turk G. , Mecke K. :Tuning Elasticity of Open-Cell Solid Foams and Bone Scaffolds via Randomized Vertex Connectivity Advanced Engineering Materials 14 2012 ), p. 120-124 ISSN: 1438-1656 10.1002/adem.201100145 Wudy K. , Drummer D. , Kühnlein F. :Polymer Blends for Selective Laser Sintering: Material and Process Requirements Laser Assisted Net Shape Engineering 7 (Fürth In: Physics Procedia 39 2012 10.1016/j.phpro.2012.10.067
2011
Marczak R. , Werner F. , Ahmad R. , Lobaz V. , Guldi DM. , Peukert W. :Detailed investigations of ZnO photoelectrodes preparation for dye sensitized solar cells Langmuir 27 2011 ), p. 3920-3929 ISSN: 0743-7463 10.1021/la1042876 Rietzel D. , Aquite W. , Drummer D. , Osswald T. :Polymer powders for Selective Laser Sintering - Production and Characterization 44th Conference on Manufacturing Systems (Madison, WI In: 44th Conference on Manufacturing Systems 2011 Rietzel D. , Drexler M. , Drummer D. :Grundlegende Betrachtungen zur Modellierung transienter thermischer Vorgänge beim selektiven Lasersintern von Thermoplasten RTejournal - Forum für Rapid Technologie 8 2011 ), p. 1 ISSN: 1614-0923 Rietzel D. , Drexler M. , Kühnlein F. , Drummer D. :Influence of temperature fields on the processing of polymer powders by means of laser and mask sintering technology Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference (Austin 8. August 2011 - 10. August 2011 )In: Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2011 Rietzel D. , Drummer D. :Grundlegende Betrachtungen zur Modellierung transienter thermischer Vorgänge beim selektiven Lasersintern von Thermoplasten Rapid.Tech 2011 (Erfurt In: Tagungsband Rapid.Tech 2011 2011 Wulfhorst J. , Seide G. , Gries T. , Rietzel D. , Drummer D. :Substitution of powders by ultrashort cut fibers for selective lasersintering (SLS) 11th world textile conference AUTEX (Mulhouse (F) In: 11th world textile conference AUTEX 2011
2010
Boß M. , Meister M. , Rietzel D. :Inside Greek Vases - on examining the skill of ancient greek craftsmen producing complex 3D shapes using nowadays technologies International Conference on Computer Applications and Quantitative Methods in Archaeology, 37, 2009, Williamsburg, Va. (Williamsburg, Virginia 22. March 2009 - 26. March 2009 )In: Frischer Bernard (ed.): Making history interactive : proceedings of the 37th international conference, Williamsburg, Virginia, Unites States of America, march 22 - 26, 2009 , Oxford 2010 Drummer D. , Kühnlein F. , Rietzel D. , Hülder G. :Untersuchung der Materialalterung bei pulverbasierten Schichtbauverfahren RTejournal - Forum für Rapid Technologie 7 2010 ), p. 1-5 ISSN: 1614-0923 Drummer D. , Rietzel D. , Kühnlein F. :Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering Physics Procedia 5 2010 ), p. 533-542 ISSN: 1875-3892 10.1016/j.phpro.2010.08.081 Kühnlein F. , Rietzel D. , Drummer D. :Feasibility study of additive manufacturing of thermally conductive pa12 powders by selective mask sintering 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956676154&origin=inward Rietzel D. , Kühnlein F. , Drummer D. :Characterization of new thermoplastics for additive manufacturing by selective laser sintering 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956666230&origin=inward Wartzack S. , Drummer D. , Wittmann S. , Stuppy J. , Rietzel D. , Tremmel S. , Kühnlein F. :Besonderheiten bei der Auslegung und Gestaltung lasergesinterter Bauteile RTejournal - Forum für Rapid Technologie 7 2010 ), p. - ISSN: 1614-0923
Addition information