Lanzl, Lydia

Lydia Lanzl, M.Sc.

Institute of Polymer Technology (LKT)

Raum 2.11
Am Weichselgarten 9
91058 Erlangen-Tennenlohe

2021

Drummer D., Grützmacher C., Kleffel T., Lanzl L., Rösel U., Roth B., Schneider K., Tomiak F., Wittmann LM.:
Hochgefüllte Kunststoffe: Neue Potenziale durch den Einsatz von Füllstoffen zur gezielten Eigenschaftsmodifikation
In: Jahresmagazin Ingenieurwissenschaften (2021), S. 38-45
ISSN: 1618-8357
Open Access: https://institut-wv.de/wp-content/uploads/sites/9/2021/10/096-650_WAK-Kunststoff_2021_s.pdf
Lanzl L., Drummer D.:
Process Behavior of Short Glass Fiber Filled Systems during Powder Bed Fusion and Its Effect on Part Dimensions
In: Polymers 13 (2021), Art.Nr.: 3144
ISSN: 2073-4360
DOI: 10.3390/polym13183144
Rothfelder R., Lanzl L., Selzam JH., Drummer D., Schmidt M.:
Vibrational Microfeeding of Polymer and Metal Powders for Locally Graded Properties in Powder-Based Additive Manufacturing
In: Journal of Materials Engineering and Performance (2021)
ISSN: 1059-9495
DOI: 10.1007/s11665-021-06271-5

2020

Lanzl L., Wudy K., Drummer D.:
The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting
In: Polymer Testing (2020)
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2019.106313

2019

Dechet M., Lanzl L., Werner Y., Drummer D., Bück A., Peukert W., Schmidt J.:
Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf
Dechet M., Lanzl L., Wilden A., Sattes MM., Drummer D., Peukert W., Schmidt J.:
Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf
Greiner S., Lanzl L., Wudy K., Drummer D.:
A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers
PPS (Polymer Processing Society) (Dresden, 26. Juni 2017 - 29. Juni 2017)
In: AIP Conference Proceedings 2055 2019
DOI: 10.1063/1.5084907
Lanzl L., Drummer D.:
Gefüllte Systeme für die Additive Fertigung: Erhöhung der Reproduzierbarkeit durch innovative Mischstrategien
7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
In: Vom Pulver zum multifunktionalen Bauteil 2019
Lanzl L., Wudy K., Greiner S., Drummer D.:
Selective laser sintering of copper filled polyamide 12: powder properties and process behavior
In: Polymer Composites 40 (2019), S. 1801-1809
ISSN: 0272-8397
DOI: 10.1002/pc.24940
Wudy K., Schmidt J., Lanzl L., Zhao M., Jaksch A., Dechet M., Hesse N., Drummer D., Peukert W.:
Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization
7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
In: Dietmar Drummer (Hrsg.): Vom Pulver zum multifunktionalen Bauteil 2019

2018

Dechet M., Gomez Bonilla JS., Lanzl L., Drummer D., Bück A., Schmidt J., Peukert W.:
Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
In: Polymers 10 (2018), Art.Nr.: 1373
ISSN: 2073-4360
DOI: 10.3390/polym10121373
Drexler M., Greiner S., Lexow M., Lanzl L., Wudy K., Drummer D.:
Selective laser melting of polymers: Influence of powder coating on mechanical part properties
In: Journal of Polymer Engineering 38 (2018), S. 667-674
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0133
Greiner S., Lanzl L., Zhao M., Wudy K., Drummer D.:
Influence of powder bed surface on part properties produced by selective laser beam melting of polymers
7th International Conference on Additive Technologies - iCAT 2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
Lanzl L., Greiner S., Wudy K., Drummer D.:
Glass-Filled Polypropylene-Systems for Enhancing Reproducibility during Selective Laser Beam Melting and Effect of the Mixing Strategy on Powder Properties
7th International Conference on Additive Technologies - iCAT2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018

2017

Greiner S., Lanzl L., Wudy K., Drexler M., Drummer D.:
Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen
Rapid Tech 2017 (Erfurt, 20. Juni 2017 - 22. Juni 2017)
In: Proceedings of Rapid Tech 2017 2017
Greiner S., Wudy K., Lanzl L., Drummer D.:
Selective laser sintering of polymer blends: Bulk properties and process behavior
In: Polymer Testing 64 (2017), S. 136-144
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2017.09.039
Lanzl L., Wudy K., Greiner S., Drummer D.:
Selektives Laserstrahlschmelzen von glasfasergefüllten Polymersystemen
5. Industriekolloquium des SFB 814 (Nürnberg, 12. Dezember 2017 - 12. Dezember 2017)
In: 5. Industriekolloquium des SFB 814 2017

2016

Lanzl L., Greiner S., Wudy K., Drummer D.:
Selective laser sintering of a polypropylene polyamide 12 blend: Bulk and component properties
iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Proceedings of 6th International Conference on Additive Technologies 2016
Lanzl L., Wudy K., Drexler M., Drummer D.:
Laser-high-speed-DSC: Process-oriented thermal analysis of PA 12 in selective laser sintering
In: Physics Procedia 83 (2016), S. 981-990
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.103
Schmidt J., Gomez Bonilla JS., Sachs M., Lanzl L., Wudy K., Wirth KE., Drummer D., Peukert W.:
Production of polybutylene terephtalate glass composite powders and characterization for processing in selective laser sintering
26th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin, 8. August 2016 - 10. August 2016)
Wudy K., Drexler M., Lanzl L., Drummer D.:
Analysis of time dependent thermal properties for high rates in selective laser sintering
iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Proceedings of 6th International Conference on Additive Technologies 2016
Wudy K., Lanzl L., Drummer D.:
Selective Laser Sintering of Filled Polymer Systems: Bulk and Laser Beam Interaction
In: Physics Procedia 83 (2016), S. 991-1002
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.104.
Wudy K., Lanzl L., Drummer D.:
Selective laser sintering of filled polymer systems: Bulk properties and laser beam material interaction
In: Physics Procedia 83 (2016), S. 991-1002
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.104