2020

• Adler L., Fu Z., Körner C.:
  Electron beam based additive manufacturing of Fe3Al based iron aluminides – Processing window, microstructure and properties
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 785 (2020), Article No.: 139369
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2020.139369
• Bieske J., Franke M., Schloffer M., Körner C.:
  Microstructure and properties of TiAl processed via an electron beam powder bed fusion capsule technology
  In: Intermetallics 126 (2020), Article No.: 106929
  ISSN: 0966-9795
  DOI: 10.1016/j.intermet.2020.106929
• Förner A., Giese S., Arnold C., Felfer P., Körner C., Neumeier S., Göken M.:
  Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting
  In: Scientific Reports 10 (2020), Article No.: 15153
  ISSN: 2045-2322
  DOI: 10.1038/s41598-020-72093-5
• Gotterbarm M., Rausch A., Körner C.:
  Fabrication of Single Crystals through a µ-Helix Grain Selection Process during Electron Beam Metal Additive Manufacturing
  In: Metals (2020)
  ISSN: 2075-4701
  DOI: 10.3390/met10030313
• Gotterbarm M., Seifi M., Melzer D., Džugan J., Salem AA., Liu ZH., Körner C.:
  Small scale testing of IN718 single crystals manufactured by EB-PBF
  In: Additive Manufacturing 36 (2020), Article No.: 101449
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101449
• Guschlbauer R., Burkhardt AK., Fu Z., Körner C.:
  Effect of the oxygen content of pure copper powder on selective electron beam melting
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 779 (2020), Article No.: 139106
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2020.139106
• Heinl M., Greiner S., Wudy K., Pobel C., Rasch M., Huber F., Papke T., Merklein M., Schmidt M., Körner C., Drummer D., Hausotte T.:
  Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
  In: Measurement Science and Technology 31 (2020), p. 1-14
  ISSN: 1361-6501
  DOI: 10.1088/1361-6501/ab89e2
• Heßelmann C., Wolf T., Galgon F., Körner C., Albert J., Wasserscheid P.:
  Additively manufactured Raney-type Copper catalyst for methanol synthesis
  In: Catalysis: Science and Technology 10 (2020), p. 164-168
  ISSN: 2044-4753
  DOI: 10.1039/C9CY01657K
• Himmler D., Randelzhofer P., Körner C.:
  Formation kinetics and phase stability of in-situ Al3Ti particles in aluminium casting alloys with varying Si content
  In: Results in Materials (2020)
  ISSN: 2590-048X
  DOI: 10.1016/j.rinma.2020.100103
• Horst OM., Adler D., Git P., Wang H., Streitberger J., Holtkamp M., Jöns N., Singer R., Körner C., Eggeler G.:
  Exploring the fundamentals of Ni-based superalloy single crystal (SX) alloy design: Chemical composition vs. microstructure
  In: Materials & Design 195 (2020), Article No.: 108976
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2020.108976
• Horst OM., Ibrahimkhel S., Streitberger J., Wochmjakow N., Git P., Scholz F., Thome P., Singer R., Körner C., Frenzel J.,  Eggeler G.:
  On the Influence of Alloy Composition on Creep Behavior of Ni-Based Single-Crystal Superalloys (SXs)
  14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA, 12. September 2021 - 16. September 2021)
  In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (ed.): Minerals, Metals and Materials Series 2020
  DOI: 10.1007/978-3-030-51834-9_6
• Körner C., Markl M., Koepf JA.:
  Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-05946-3
• Liu C., Le Roux L., Körner C., Tabaste O., Lacan F., Bigot S.:
  Digital Twin-enabled Collaborative Data Management for Metal Additive Manufacturing Systems
  In: Journal of Manufacturing Systems (2020)
  ISSN: 0278-6125
  DOI: 10.1016/j.jmsy.2020.05.010
• Luo N., Scheitler CJ., Ciftci N., Galgon F., Fu Z., Uhlenwinkel V., Schmidt M., Körner C.:
  Preparation of Fe-Co-B-Si-Nb bulk metallic glasses by laser powder bed fusion: Microstructure and properties
  In: Materials Characterization 162 (2020), Article No.: 110206
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2020.110206
• Prach O., Trudonoshyn O., Randelzhofer P., Körner C., Durst K.:
  Multi-alloying effect of Sc, Zr, Cr on the Al-Mg-Si-Mn high-pressure die casting alloys
  In: Materials Characterization 168 (2020)
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2020.110537
• Rausch A., Gotterbarm M., Pistor J., Markl M., Körner C.:
  New grain formation by constitutional undercooling due to remelting of segregated microstructures during powder bed fusion
  In: Materials 13 (2020), p. 1-14
  ISSN: 1996-1944
  DOI: 10.3390/ma13235517
• Reith M., Franke M., Schloffer M., Körner C.:
  Processing 4th generation titanium aluminides via electron beam based additive manufacturing – characterization of microstructure and mechanical properties
  In: Materialia 14 (2020), Article No.: 100902
  ISSN: 2589-1529
  DOI: 10.1016/j.mtla.2020.100902
• Sheng N., Meyer A., Horke K., Körner C., Singer R.:
  Secondary Recrystallization of Nickel-Base Superalloy CM 247 LC After Processing by Metal Injection Molding
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-06087-3
• Trudonoshyn O., Prach O., Randelzhofer P., Durst K., Körner C.:
  Heat treatment of the new high-strength high-ductility Al–Mg–Si–Mn alloys with Sc, Zr and Cr additions
  In: Materialia 15 (2020), Article No.: 100981
  ISSN: 2589-1529
  DOI: 10.1016/j.mtla.2020.100981
• Winkler S., Mutschall H., Biggemann J., Fey T., Greil P., Körner C., Weisbach VG., Meyer-Lindenberg A., Arkudas A., Horch RE., Steiner D.:
  Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model
  In: Tissue Engineering - Part A (2020)
  ISSN: 1937-335X
  DOI: 10.1089/ten.tea.2020.0087
• Wolf T., Fu Z., Ye J., Heßelmann C., Pistor J., Albert J., Wasserscheid P., Körner C.:
  Periodic open cellular Raney-Copper-Catalysts fabricated via selective electron beam melting
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201901524
• Zeng Y., Himmler D., Randelzhofer P., Körner C.:
  Processing of in situ Al3Ti/Al composites by advanced high shear technology: influence of mixing speed
  In: International Journal of Advanced Manufacturing Technology 110 (2020), p. 1589-1599
  ISSN: 0268-3768
  DOI: 10.1007/s00170-020-05956-w

2019

• Arnold C., Boehm J., Körner C.:
  In Operando Monitoring by Analysis of Backscattered Electrons during Electron Beam Melting
  In: Advanced Engineering Materials 22 (2019), Article No.: 1901102
  ISSN: 1438-1656
  DOI: 10.1002/adem.201901102
• Bürger D., Parsa AB., Ramsperger M., Körner C., Eggeler G.:
  Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 762 (2019), Article No.: 138098
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2019.138098
• Fiegl T., Franke M., Körner C.:
  Impact of build envelope on the properties of additive manufactured parts from AlSi10Mg
  In: Optics and Laser Technology 111 (2019), p. 51-57
  ISSN: 0030-3992
  DOI: 10.1016/j.optlastec.2018.08.050
• Köpf J., Soldner D., Ramsperger M., Mergheim J., Markl M., Körner C.:
  Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
  In: Computational Materials Science 162 (2019), p. 148-155
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2019.03.004
• Lomakin K., Guschlbauer R., Osmanlic F., Fu Z., Sippel M., Helmreich K., Körner C., Vossiek M., Gold G.:
  3D Printed Copper Waveguides by Selective Electron Beam Melting Process for E-Band
  EuMW 2019 (Paris)
• Markl M., Rausch A., Küng V., Körner C.:
  SAMPLE: A Software Suite to Predict Consolidation and Microstructure for Powder Bed Fusion Additive Manufacturing
  In: Advanced Engineering Materials (2019), Article No.: 1901270
  ISSN: 1438-1656
  DOI: 10.1002/adem.201901270
• Meid C., Dennstedt A., Ramsperger M., Pistor J., Ruttert B., Lopez-Galilea I., Theisen W., Körner C., Bartsch M.:
  Effect of heat treatment on the high temperature fatigue life of single crystalline nickel base superalloy additively manufactured by means of selective electron beam melting
  In: Scripta Materialia 168 (2019), p. 124-128
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2019.05.002
• Müller A., Roslyakova I., Sprenger M., Git P., Rettig R., Markl M., Körner C., Singer R.:
  MultOpt++: a fast regression-based model for the development of compositions with high robustness against scatter of element concentrations
  In: Modelling and Simulation in Materials Science and Engineering 27 (2019)
  ISSN: 0965-0393
  DOI: 10.1088/1361-651X/aaf0b8
• Müller A., Sprenger M., Ritter N., Rettig R., Markl M., Körner C., Singer R.:
  MultOpt++: a fast regression-based model for the constraint violation fraction due to composition uncertainties
  In: Modelling and Simulation in Materials Science and Engineering 27 (2019)
  ISSN: 0965-0393
  DOI: 10.1088/1361-651X/aaf01e
• Pistor J., Körner C.:
  Formation of topologically closed packed phases within CMSX-4 single crystals produced by additive manufacturing
  In: Materials Letters 1 (2019)
  ISSN: 0167-577X
  DOI: 10.1016/j.mlblux.2019.100003
• Pobel C., Arnold C., Osmanlic F., Fu Z., Körner C.:
  Immediate development of processing windows for selective electron beam melting using layerwise monitoring via backscattered electron detection
  In: Materials Letters 249 (2019), p. 70 - 72
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2019.03.048
• Pobel C., Reichel S., Fu Z., Osmanlic F., Körner C.:
  Advanced process strategy to realize microducts free of powder using selective electron beam melting
  In: International Journal of Advanced Manufacturing Technology (2019)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-019-03615-3
• Prach O., Trudonoshyn O., Randelzhofer P., Körner C., Durst K.:
  Effect of Zr, Cr and Sc on the Al–Mg–Si–Mn high-pressure die casting alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing (2019)
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2019.05.038
• Rasch M., Heberle J., Dechet M., Bartels D., Gotterbarm M., Klein L., Gorunov A., Schmidt J., Körner C., Peukert W., Schmidt M.:
  Grain Structure Evolution of Al–Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties
  In: Materials 13 (2019)
  ISSN: 1996-1944
  DOI: 10.3390/ma13010082
• Trudonoshyn O., Rehm S., Randelzhofer P., Körner C.:
  Improvement of the high-pressure die casting alloy Al-5.7Mg-2.6Si-0.7Mn with Zn addition
  In: Materials Characterization 158 (2019)
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2019.109959
• Wahlmann B., Galgon F., Stark A., Gayer S., Schell N., Staron P., Körner C.:
  Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions
  In: Acta Materialia (2019)
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.08.049
• Wedler J., Körner C.:
  Sensor-based Observation and Numerical Simulation of Mold Filling During High Pressure Die Casting
  In: Giesserei (2019), p. 18-25
  ISSN: 0016-9765
• Wolf T., Fu Z., Körner C.:
  Selective electron beam melting of an aluminum bronze: Microstructure and mechanical properties
  In: Materials Letters 238 (2019), p. 241-244
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2018.12.015
• Zeng Y., Himmler D., Randelzhofer P., Körner C.:
  In situ Al3Ti/Al composites fabricated by high shear technology: microstructure and mechanical properties
  In: Materials Science and Technology 35 (2019), p. 2294-2303
  ISSN: 0267-0836
  DOI: 10.1080/02670836.2019.1677025

2018

• Arnold C., Pobel C., Osmanlic F., Körner C.:
  Layerwise monitoring of electron beam melting via backscatter electron detection
  In: Rapid Prototyping Journal 24 (2018), p. 1401 - 1406
  ISSN: 1355-2546
  DOI: 10.1108/RPJ-02-2018-0034
• Guschlbauer R., Momeni S., Osmanlic F., Körner C.:
  Process development of 99.95% pure copper processed via selective electron beam melting and its mechanical and physical properties
  In: Materials Characterization (2018)
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2018.04.009
• Hübner D., Gotterbarm M., Kergaßner A., Köpf J., Pobel C., Markl M., Mergheim J., Steinmann P., Körner C., Stingl M.:
  Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
  iCAT 2018 (Maribor, 10. October 2018 - 11. October 2018)
  In: Proceedings of 7th International Conference on Additive Technologies 2018
• Jüchter V., Franke M., Merenda T., Stich A., Körner C., Singer R.:
  Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications
  In: Additive Manufacturing 22 (2018), p. 118-126
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2018.05.008
• Köpf J., Gotterbarm M., Markl M., Körner C.:
  3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
  In: Acta Materialia 152 (2018), p. 119-126
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.04.030
• Köpf J., Rasch M., Meyer A., Markl M., Schmidt M., Körner C.:
  3D grain growth simulation and experimental verification in laser beam melting of IN718
  10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth, 4. September 2018 - 6. September 2018)
  In: Procedia CIRP 74 (2018) 2018
  Open Access: https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf
  URL: https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf
• Körner C., Ramsperger M., Meid C., Bürger D., Wollgramm P., Bartsch M., Eggeler G.:
  Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49 (2018), p. 3781-3792
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4762-5
• Küng V., Osmanlic F., Markl M., Körner C.:
  Comparison of passive scalar transport models coupled with the Lattice Boltzmann method
  In: Computers & Mathematics with Applications (2018)
  ISSN: 0898-1221
  DOI: 10.1016/j.camwa.2018.01.017
• Markl M., Körner C.:
  Powder layer deposition algorithm for additive manufacturing simulations
  In: Powder Technology 330 (2018), p. 125-136
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2018.02.026
• Markl M., Müller A., Ritter N., Hofmeister M., Naujoks D., Schaar H., Abrahams K., Frenzel J., Subramanyam APA., Ludwig A., Pfetzing-Micklich J., Hammerschmidt T., Drautz R., Steinbach I., Rettig R., Singer R., Körner C.:
  Development of Single-Crystal Ni-Base Superalloys Based on Multi-criteria Numerical Optimization and Efficient Use of Refractory Elements
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), p. 4134-4145
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4759-0
• Momeni S., Guschlbauer R., Osmanlic F., Körner C.:
  Selective electron beam melting of a copper-chrome powder mixture
  In: Materials Letters 223 (2018), p. 250-252
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2018.03.194
• Novak N., Borovinsek M., Vesenjak M., Wormser M., Körner C., Tanaka S., Hokamoto K., Ren Z.:
  Crushing Behavior of Graded Auxetic Structures Built from Inverted Tetrapods under Impact
  In: physica status solidi (b) (2018)
  ISSN: 0370-1972
  DOI: 10.1002/pssb.201800040
• Osmanlic F., Wudy K., Laumer T., Schmidt M., Drummer D., Körner C.:
  Modeling of Laser Beam Absorption in a Polymer Powder Bed
  In: Polymers 10 (2018)
  ISSN: 2073-4360
  DOI: 10.3390/polym10070784
• Pobel C., Lodes M., Körner C.:
  Selective Electron Beam Melting of Oxide Dispersion Strengthened Copper
  In: Advanced Engineering Materials 20 (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800068
• Rausch A., Markl M., Körner C.:
  Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution
  In: Computers & Mathematics with Applications (2018)
  ISSN: 0898-1221
  DOI: 10.1016/j.camwa.2018.06.029
• Ritter N., Sowa R., Schauer JC., Gruber D., Göhler T., Rettig R., Körner C., Singer R.:
  Effects of Solid Solution Strengthening Elements Mo, Re, Ru, and W on Transition Temperatures in Nickel-Based Superalloys with High γ′-Volume Fraction: Comparison of Experiment and CALPHAD Calculations
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2018)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4730-0
• Schwankl M., Himmler D., Urban M., Körner C.:
  Optimization of Mechanical Properties of Al–Al‐Compound Castings by Adapted Heat Treatment
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800400
• Winkler A., Modler N., Drossel WG., Mäder T., Körner C.:
  High-Volume Production-Compatible Technologies for Light Metal and Fiber Composite-Based Components with Integrated Piezoceramic Sensors and Actuators
  In: Advanced Engineering Materials 20 (2018), Article No.: 1801001
  ISSN: 1438-1656
  DOI: 10.1002/adem.201801001
• Wormser M., Adler L., Körner C.:
  Mechanische zellulare Metamaterialien aus Metall durch Selektives Elektronenstrahlschmelzen
  In: DGM (ed.): Materialwissenschaft und Werkstofftechnik:
  Zellulare Werkstoffe · Zellulare Materialien, 2018, p. 16-24 (Dialog, Vol.2/2018)
• Zeng Y., Himmler D., Randelzhofer P., Körner C.:
  Microstructures and Mechanical Properties of Al3Ti/Al Composites Produced In Situ by High Shearing Technology
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800259

2017

• Arkudas A., Lipp A., Bührer G., Arnold I., Davinova D., Brandl A., Beier J., Körner C., Lyer S., Alexiou C., Kneser U., Horch RE.:
  Pedicled Transplantation of Axially Vascularized Bone Constructs in a Critical Size Femoral Defect
  In: Tissue Engineering: Parts A, B, and C (2017)
  ISSN: 1937-3368
  DOI: 10.1089/ten.tea.2017.0110
• Do G., Freund H., Fiegl M., Adler L., Körner C., Bösmann A., Freund HD., Schwieger W., Wasserscheid P.:
  Electrophoretic Deposition of Boehmite on Additively Manufactured, Interpenetrating Periodic Open Cellular Structures for Catalytic Applications
  In: Industrial & Engineering Chemistry Research 56 (2017), p. 13403-13411
  ISSN: 0888-5885
  DOI: 10.1021/acs.iecr.7b02453
• Hofmeister M., Franke M., Körner C., Singer R.:
  Single Crystal Casting with Fluidized Carbon Bed Cooling: A Process Innovation for Quality Improvement and Cost Reduction
  In: Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science 48 (2017), p. 3132-3142
  ISSN: 1073-5615
  DOI: 10.1007/s11663-017-1110-x
• Klassen A., Forster V., Jüchter V., Körner C.:
  Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl
  In: Journal of Materials Processing Technology 247 (2017), p. 280-288
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2017.04.016
• Klassen A., Forster V., Körner C.:
  A multi-component evaporation model for beam melting processes
  In: Modelling and Simulation in Materials Science and Engineering 25 (2017), Article No.: 025003
  ISSN: 1361-651X
  DOI: 10.1088/1361-651X/aa5289
• Markl M., Lodes M., Franke M., Körner C.:
  Additive Fertigung durch selektives Elektronenstrahlschmelzen
  In: Schweissen und Schneiden (2017), p. 30-39
  ISSN: 0036-7184
• Markl M., Lodes M., Franke M., Körner C.:
  Additive manufacturing using selective electron beam melting
  In: Welding and Cutting (2017), p. 177-184
  ISSN: 1612-3433
• Rai A., Helmer H., Körner C.:
  Simulation of grain structure evolution during powder bed based additive manufacturing
  In: Additive Manufacturing 13 (2017), p. 124-134
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2016.10.007
• Rausch A., Küng V., Pobel C., Markl M., Körner C.:
  Predictive Simulation of Process Windows for Powder Bed Fusion Additive Manufacturing: Influence of the Powder Bulk Density
  In: Materials 10 (2017)
  ISSN: 1996-1944
  DOI: 10.3390/ma10101117
• Riedlbauer DR., Scharowsky T., Singer R., Steinmann P., Körner C., Mergheim J.:
  Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V
  In: International Journal of Advanced Manufacturing Technology (2017)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-016-8819-6
  URL: http://link.springer.com/article/10.1007/s00170-016-8819-6
• Ritter N., Schesler E., Müller A., Rettig R., Körner C., Singer R.:
  On the Influence of Ta and Ti on Heat-Treatability and γ/γ'-Partitioning of High W Containing Re-Free Nickel-Based Superalloys
  In: Advanced Engineering Materials (2017)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201700150
• Scharowsky T., Bauereiß A., Körner C.:
  Influence of the hatching strategy on consolidation during selective electron beam melting of Ti-6Al-4V
  In: International Journal of Advanced Manufacturing Technology (2017), p. 1-10
  ISSN: 0268-3768
  DOI: 10.1007/s00170-017-0375-1
• Stein S., Wedler J., Rhein S., Schmidt M., Körner C., Michaelis A., Gebhardt S.:
  A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures
  In: Results in Physics (2017)
  ISSN: 2211-3797
  DOI: 10.1016/j.rinp.2017.07.034
• Warmuth F., Adler L., Osmanlic F., Lodes M., Körner C.:
  Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting
  In: Smart Materials and Structures 26 (2017), Article No.: 025013
  ISSN: 1361-665X
  DOI: 10.1088/1361-665X/26/2/025013
• Warmuth F., Wormser M., Körner C.:
  Single phase 3D phononic band gap material
  In: Scientific Reports (2017), Article No.: 3843
  ISSN: 2045-2322
  DOI: 10.1038/s41598-017-04235-1
• Wormser M., Warmuth F., Körner C.:
  Evolution of full phononic band gaps in periodic cellular structures
  In: Applied Physics A: Solids and Surfaces (2017), Article No.: 123:661
  ISSN: 0721-7250
  DOI: 10.1007/s00339-017-1278-6
• Wormser M., Wein F., Stingl M., Körner C.:
  Design and Additive Manufacturing of 3D Phononic Band Gap Structures Based on Gradient Based Optimization
  In: Materials 10 (2017)
  ISSN: 1996-1944
  DOI: 10.3390/ma10101125

2016

• Adler L., Warmuth F., Lodes M., Osmanlic F., Körner C.:
  The effect of a negative Poisson's ratio on thermal stresses in cellular metallic structures
  In: Smart Materials and Structures 25 (2016), Article No.: 115038
  ISSN: 1361-665X
  DOI: 10.1088/0964-1726/25/11/115038
• Helmer H., Bauereiß A., Singer R., Körner C.:
  Erratum to: ‘Grain structure evolution in Inconel 718 during selective electron beam melting’ (Materials Science & Engineering A (2016) 668 (180–187 (S0921509316305536) (10.1016/j.msea.2016.05.046))
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 (2016)
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2016.09.016
• Helmer H., Bauereiß A., Singer R., Körner C.:
  Grain structure evolution in Inconel 718 during selective electron beam melting
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 668 (2016), p. 180-187
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2016.05.046
• Jüchter V., Körner C.:
  Creep properties of Ti-48Al-2Cr-2Nb produced by selective electron beam melting
  3rd Conference on Powder Processing Consolidation and Metallurgy of Titanium, 2015 (Lüneburg, 31. August 2015 - 3. September 2015)
  DOI: 10.4028/www.scientific.net/KEM.704.190
• Köpf J., Rai A., Markl M., Körner C.:
  3D Grain Structure Simulation for Beam-Based Additive Manufacturing
  6th International Conference on Additive Technologies iCAT (Nürnberg, 29. November 2017 - 30. November 2016)
  In: Proceedings of the 6th International Conference on Additive Technologies iCAT 2016 2016
• Körner C.:
  Additive manufacturing of metallic components by selective electron beam melting - A review
  In: International Materials Reviews 61 (2016), p. 361-377
  ISSN: 0308-4590
  DOI: 10.1080/09506608.2016.1176289
• Körner C., Ramsperger M.:
  Selective electron beam melting of the single crystalline nickel-base superalloy CMSX-4®: From columnar grains to a single crystal
  13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs, 11. September 2016 - 15. September 2016)
  In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (ed.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016
  DOI: 10.1002/9781119075646.ch37
• Markl M., Bauereiß A., Rai A., Körner C.:
  Numerical Investigations of Selective Electron Beam Melting on the Powder Scale
  Fraunhofer Direct Digital Manufacturing Conference 2016 (Berlin, 16. March 2016 - 17. March 2016)
  In: Proceedings of the Fraunhofer Direct Digital Manufacturing Conference 2016 2016
• Markl M., Körner C.:
  Multiscale Modeling of Powder Bed-Based Additive Manufacturing
  In: Annual Review of Materials Research 46 (2016), p. 93-123
  ISSN: 1531-7331
  DOI: 10.1146/annurev-matsci-070115-032158
• Osmanlic F., Körner C.:
  Lattice Boltzmann method for Oldroyd-B fluids
  In: Computers & Fluids 124 (2016), p. 190-196
  ISSN: 0045-7930
  DOI: 10.1016/j.compfluid.2015.08.004
• Parsa AB., Ramsperger M., Kostka A., Somsen C., Körner C., Eggeler G.:
  Transmission electron microscopy of a CMSX-4 Ni-base superalloy produced by selective electron beam melting
  In: Metals 6 (2016), Article No.: 258
  ISSN: 2075-4701
  DOI: 10.3390/met6110258
• Pobel C., Gotterbarm M., Samfaß V., Osmanlic F., Körner C.:
  Innovative processing strategies for selective electron beam melting: Influence of scan line spacings on composition of Ti-6Al-4V and microstructure of IN718
  6th International Conference on Additive Technologies iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
  In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings of 6th International Conference on Additive Technologies, Ljubljana: 2016
• Raab S., Guschlbauer R., Lodes M., Körner C.:
  Thermal and Electrical Conductivity of 99.9% Pure Copper Processed via Selective Electron Beam Melting
  In: Advanced Engineering Materials 18 (2016), p. 1661-1666
  ISSN: 1438-1656
  DOI: 10.1002/adem.201600078
• Rai A., Markl M., Körner C.:
  A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing
  In: Computational Materials Science 124 (2016), p. 37-48
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2016.07.005
• Ramsperger M., Singer R., Körner C.:
  Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 (2016), p. 1469-1480
  ISSN: 1073-5623
  DOI: 10.1007/s11661-015-3300-y
• Ruttert B., Ramsperger M., Mujica Roncery L., Lopez-Galilea I., Körner C., Theisen W.:
  Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting
  In: Materials and Design 110 (2016), p. 720-727
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2016.08.041
• Schwankl M., Wedler J., Körner C.:
  Wrought Al - Cast Al compound casting based on zincate treatment for aluminum wrought alloy inserts
  In: Journal of Materials Processing Technology 238 (2016), p. 160-168
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2016.07.001
• Schwieger W., Thangaraj T., Warmuth F., Warnick KG., Klumpp M., Lodes M., Körner C.:
  Fabrication and pressure drop behavior of novel monolithic structures with zeolitic architectures
  In: Chemical Engineering Journal 288 (2016), p. 223-227
  ISSN: 1385-8947
  DOI: 10.1016/j.cej.2015.11.104

2015

• Bührer G., Balzer A., Arnold I., Beier J., Körner C., Bleiziffer O., Brandl A., Weis C., Horch RE., Kneser U., Arkudas A.:
  Combination of BMP2 and MSCs Significantly Increases Bone Formation in the Rat Arterio-Venous Loop Model
  In: Tissue Engineering - Part A 21(1-2) (2015), p. 96-105
  ISSN: 1937-335X
  DOI: 10.1089/ten.tea.2014.0028
  URL: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4293096/
• Eydam A., Suchanek G., Schwankl M., Gerlach G., Singer R., Körner C.:
  Evaluation of polarisation state of light metal embedded piezoelectrics
  In: Advances in Applied Ceramics 114 (2015), p. 226-230
  ISSN: 1743-6753
  DOI: 10.1179/1743676114Y.0000000222
• Körner C., Liebold Ribeiro Y.:
  A systematic approach to identify cellular auxetic materials
  In: Smart Materials and Structures 24 (2015), Article No.: 025013
  ISSN: 1361-665X
  DOI: 10.1088/0964-1726/24/2/025013
• Körner C., Warmuth F.:
  Phononic band gaps in 2D quadratic and 3D cubic cellular structures
  In: Materials 8 (2015), p. 8327-8337
  ISSN: 1996-1944
  DOI: 10.3390/ma8125463
• Lodes M., Guschlbauer R., Körner C.:
  Process development for the manufacturing of 99.94% pure copper via selective electron beam melting
  In: Materials Letters 143 (2015), p. 298-301
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2014.12.105
• Markl M., Ammer R., Rüde U., Körner C.:
  Numerical investigations on hatching process strategies for powder-bed-based additive manufacturing using an electron beam
  In: International Journal of Advanced Manufacturing Technology 78 (2015), p. 239-247
  ISSN: 0268-3768
  DOI: 10.1007/s00170-014-6594-9
  URL: http://link.springer.com/article/10.1007/s00170-014-6594-9
• Markl M., Körner C.:
  Free surface Neumann boundary condition for the advection-diffusion lattice Boltzmann method
  In: Journal of Computational Physics 301 (2015), p. 230-246
  ISSN: 0021-9991
  DOI: 10.1016/j.jcp.2015.08.033
• Peters W., Eypasch M., Frank T., Schwerdtfeger J., Körner C., Bösmann A., Wasserscheid P.:
  Efficient hydrogen release from perhydro-N-ethylcarbazole using catalyst-coated metallic structures produced by selective electron beam melting
  In: Energy and Environmental Science 8 (2015), p. 641-649
  ISSN: 1754-5692
  DOI: 10.1039/c4ee03461a
• Ramsperger M., Mujica Roncery L., Lopez-Galilea I., Singer R., Theisen W., Körner C.:
  Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
  In: Advanced Engineering Materials 17 (2015), p. 1486-1493
  ISSN: 1438-1656
  DOI: 10.1002/adem.201500037
• Scharowsky T., Jüchter V., Singer R., Körner C.:
  Influence of the Scanning Strategy on the Microstructure and Mechanical Properties in Selective Electron Beam Melting of Ti-6Al-4V
  In: Advanced Engineering Materials 17 (2015), p. 1573-1578
  ISSN: 1438-1656
  DOI: 10.1002/adem.201400542
• Schwankl M., Kimme S., Pohle C., Drossel WG., Körner C.:
  Active Vibration Damping in Structural Aluminum Die Castings via Piezoelectricity - Technology and Characterization
  In: Advanced Engineering Materials 17 (2015), p. 969-975
  ISSN: 1438-1656
  DOI: 10.1002/adem.201400367
• Wedler J., Schwankl M., Körner C.:
  Al-Al-Verbundguss mit höherfesten Knetlegierungen
  In: Giesserei 102 (2015), p. 46-53
  ISSN: 0016-9765

2014

• Ammer R., Ljungblad U., Markl M., Körner C., Rüde U.:
  Simulating fast electron beam melting with a parallel thermal free surface lattice Boltzmann method
  In: Computers & Mathematics with Applications 67 (2014), p. 318-330
  ISSN: 0898-1221
  DOI: 10.1016/j.camwa.2013.10.001
  URL: http://www.sciencedirect.com/science/article/pii/S0898122113005944
• Ammer R., Markl M., Jüchter V., Körner C., Rüde U.:
  Validation Experiments for LBM Simulations of Electron Beam Melting
  In: International Journal of Modern Physics C (2014), p. 1-9
  ISSN: 0129-1831
  DOI: 10.1142/S0129183114410095
  URL: http://arxiv.org/pdf/1402.2440.pdf
• Bauereiß A., Scharowsky T., Körner C.:
  Defect generation and propagation mechanism during additive manufacturing by selective beam melting
  In: Journal of Materials Processing Technology 214 (2014), p. 2522-2528
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2014.05.002
• Fuchs B., Körner C.:
  Mesh resolution consideration for the viability prediction of lost salt cores in the high pressure die casting process
  In: Progress in Computational Fluid Dynamics 14 (2014), p. 24-30
  ISSN: 1468-4349
  DOI: 10.1504/PCFD.2014.059197
• Hartmann J., Blümel C., Ernst S., Fiegl T., Wirth KE., Körner C.:
  Aluminum integral foam castings with microcellular cores by nano-functionalization
  In: Journal of Materials Science 49 (2014), p. 79-87
  ISSN: 0022-2461
  DOI: 10.1007/s10853-013-7668-z
• Hartmann J., Fiegl T., Körner C.:
  Aluminum integral foams with tailored density profile by adapted blowing agents
  In: Applied Physics A: Materials Science and Processing 115 (2014), p. 651-660
  ISSN: 1432-0630
  DOI: 10.1007/s00339-014-8377-4
• Helmer H., Körner C., Singer R.:
  Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
  In: Journal of Materials Research 29 (2014), p. 1987-1996
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2014.192
• Jüchter V., Scharowsky T., Singer R., Körner C.:
  Processing window and evaporation phenomena for Ti-6Al-4V produced by selective electron beam melting
  In: Acta Materialia 76 (2014), p. 252-258
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2014.05.037
• Klassen A., Bauereiß A., Körner C.:
  Modelling of electron beam absorption in complex geometries
  In: Journal of Physics D-Applied Physics 47 (2014), Article No.: 065307
  ISSN: 0022-3727
  DOI: 10.1088/0022-3727/47/6/065307
• Klassen A., Scharowsky T., Körner C.:
  Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods
  In: Journal of Physics D: Applied Physics 47 (2014), Article No.: 275303
  ISSN: 0022-3727
  DOI: 10.1088/0022-3727/47/27/275303
• Klumpp M., Inayat A., Schwerdtfeger J., Körner C., Singer R., Freund H., Schwieger W.:
  Periodic open cellular structures with ideal cubic cell geometry: Effect of porosity and cell orientation on pressure drop behavior
  In: Chemical Engineering Journal 242 (2014), p. 364-378
  ISSN: 1385-8947
  DOI: 10.1016/j.cej.2013.12.060
• Körner C., Helmer H., Bauereiß A., Singer R.:
  Tailoring the grain structure of IN718 during selective electron beam melting
  2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens)
  DOI: 10.1051/matecconf/20141408001
• Körner C., Schwankl M., Himmler D.:
  Aluminum-aluminum compound castings by electroless deposited zinc layers
  In: Journal of Materials Processing Technology 214 (2014), p. 1094-1101
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2013.12.014
• Liebold Ribeiro Y., Körner C.:
  Phononic band gaps in periodic cellular materials
  In: Advanced Engineering Materials 16 (2014), p. 328-334
  ISSN: 1438-1656
  DOI: 10.1002/adem.201300064
• Scharowsky T., Osmanlic F., Körner C., Singer R.:
  Melt pool dynamics during selective electron beam melting
  In: Applied Physics A-Materials Science & Processing 114 (2014), p. 1303-1307
  ISSN: 0947-8396
  DOI: 10.1007/s00339-013-7944-4
• Schwankl M., Rübner M., Flössel M., Gebhardt S., Michaelis A., Singer R., Körner C.:
  Active functionality of piezoceramic modules integrated in aluminum high pressure die castings
  In: Sensors and Actuators A-Physical 207 (2014), p. 84-90
  ISSN: 0924-4247
  DOI: 10.1016/j.sna.2013.12.016
• Schwerdtfeger J., Körner C.:
  Selective electron beam melting of Ti-48Al-2Nb-2Cr: Microstructure and aluminium loss
  In: Intermetallics 49 (2014), p. 29-35
  ISSN: 0966-9795
  DOI: 10.1016/j.intermet.2014.01.004

2013

• Fuchs B., Eibisch H., Körner C.:
  Core viability simulation for salt core technology in high-pressure die casting
  In: International Journal of Metalcasting 7 (2013), p. 39-45
  ISSN: 1939-5981
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84882430468&origin=inward
• Hrabe NW., Heinl P., Bordia RK., Körner C., Fernandes RJ.:
  Maintenance of a bone collagen phenotype by osteoblast-like cells in 3D periodic porous titanium (Ti-6Al-4 V) structures fabricated by selective electron beam melting
  In: Connective Tissue Research 54 (2013), p. 351-360
  ISSN: 0300-8207
  DOI: 10.3109/03008207.2013.822864
• Körner C., Bauereiß A., Attar E.:
  Fundamental consolidation mechanisms during selective beam melting of powders
  In: Modelling and Simulation in Materials Science and Engineering 21 (2013), Article No.: 085011
  ISSN: 0965-0393
  DOI: 10.1088/0965-0393/21/8/085011
• Markl M., Ammer R., Ljungblad U., Rüde U., Körner C.:
  Electron beam absorption algorithms for electron beam melting processes simulated by a three-dimensional thermal free surface lattice Boltzmann method in a distributed and parallel environment
  In: Procedia Computer Science 18 (2013), p. 2127-2136
  ISSN: 1877-0509
  DOI: 10.1016/j.procs.2013.05.383
  URL: http://www.sciencedirect.com/science/article/pii/S1877050913005267
• Schaub A., Merklein M., Jüchter V., Singer R., Körner C.:
  Funktionsintegration durch die Kombination additiver Fertigungsprozesse mit der Blechumformung
  2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung
  In: Drummer, D. (ed.): 2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2013
• Schwankl M., Kellner R., Singer R., Körner C.:
  The influence of sandblasting on the morphology of electroless deposited zinclayers on aluminum sheets
  In: Applied Surface Science 283 (2013), p. 202-208
  ISSN: 0169-4332
  DOI: 10.1016/j.apsusc.2013.06.082
• Schwankl M., Rübner M., Singer R., Körner C.:
  Integration of PZT-ceramic modules using hybrid structures in high pressure die casting
  DOI: 10.1016/j.mspro.2013.02.020
• Wieding J., Fritsche A., Heinl P., Körner C., Matthias C., Seitz H., Mittelmeier W., Bader R.:
  Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions
  In: Journal of Applied Biomaterials and Fundamental Materials 11 (2013), p. 159-166
  ISSN: 2280-8000
  DOI: 10.5301/JABFM.2013.10832

2012

• Arkudas A., Galyna P., Beier J., Weigel L., Körner C., Singer R., Bleiziffer O., Polykandriotis E., Horch RE., Kneser U.:
  Combination of extrinsic and intrinsic pathways significantly accelerates axial vascularization of bioartificial tissues
  In: Plastic and Reconstructive Surgery 129 (2012), p. 55e-65e
  ISSN: 0032-1052
  DOI: 10.1097/PRS.0b013e3182361f97
• Klassen A., Rübner M., Ilg J., Rupitsch S., Lerch R., Singer R., Körner C.:
  Influence of the fabrication process on the functionality of piezoceramic patch transducers embedded in aluminum die castings
  In: Smart Materials & Structures 21 (2012)
  ISSN: 0964-1726
  DOI: 10.1088/0964-1726/21/11/115014
• Knorr T., Heinl P., Schwerdtfeger J., Körner C., Singer R., Etzold B.:
  Process specific catalyst supports-Selective electron beam melted cellular metal structures coated with microporous carbon
  In: Chemical Engineering Journal (2012), p. 725-733
  ISSN: 1385-8947
  DOI: 10.1016/j.cej.2011.10.009
• Scharowsky T., Bauereiß A., Singer R., Körner C.:
  Observation and numerical simulation of melt pool dynamic and beam powder interaction during selective electron beam melting
  23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012 (Austin, TX)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84889688177&origin=inward
• Schwerdtfeger J., Schury F., Stingl M., Wein F., Singer R., Körner C.:
  Mechanical characterisation of a periodic auxetic structure produced by SEBM
  In: physica status solidi (b) 249 (2012), p. 1347-1352
  ISSN: 0370-1972
  DOI: 10.1002/pssb.201084211
• Schwerdtfeger J., Singer R., Körner C.:
  In situ flaw detection by IR-imaging during electron beam melting
  In: Rapid Prototyping Journal 18 (2012), p. 259-263
  ISSN: 1355-2546
  DOI: 10.1108/13552541211231572

2011

• Attar E., Körner C.:
  Lattice Boltzmann model for thermal free surface flows with liquid-solid phase transition
  In: International Journal of Heat and Fluid Flow 32 (2011), p. 156-163
  ISSN: 0142-727X
  DOI: 10.1016/j.ijheatfluidflow.2010.09.006
• Hartmann J., Trepper A., Körner C.:
  Aluminum integral foams with near-microcellular structure
  In: Advanced Engineering Materials 13 (2011), p. 1050-1055
  ISSN: 1438-1656
  DOI: 10.1002/adem.201100035
• Hrabe NW., Heinl P., Flinn B., Körner C., Bordia RK.:
  Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
  In: Journal of Biomedical Materials Research Part B-Applied Biomaterials (2011), p. 313-320
  ISSN: 1552-4973
  DOI: 10.1002/jbm.b.31901
• Inayat A., Schwerdtfeger J., Freund H., Körner C., Singer R., Schwieger W., Freund H.:
  Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing
  In: Chemical Engineering Science 66 (2011), p. 2758-2763
  ISSN: 0009-2509
  DOI: 10.1016/j.ces.2011.03.031
• Klassen A., Rübner M., Ilg J., Rupitsch S., Lerch R., Körner C., Singer R.:
  Integration of piezoceramic sensors and actuators into structural components via high pressure die casting
  In: R. Neugebauer (ed.): Proceedings of the CRC/TR39 3rd Scientific Symposium "Integration of Active Functions into Structural Elements", Chemnitz: 2011
• Körner C., Attar E., Heinl P.:
  Mesoscopic simulation of selective beam melting processes
  In: Journal of Materials Processing Technology 211 (2011), p. 978-987
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2010.12.016
• Mitschke H., Schwerdtfeger J., Schury F., Stingl M., Körner C., Singer R., Robins V., Mecke K., Schröder-Turk G.:
  Erratum: Finding auxetic frameworks in periodic tessellations
  In: Advanced Materials 23 (2011), p. 2669-2674
  ISSN: 0935-9648
  DOI: 10.1002/adma.201190118
• Mitschke H., Schwerdtfeger J., Schury F., Stingl M., Körner C., Singer R., Robins V., Mecke K., Schröder-Turk G.:
  Finding Auxetic Frameworks in Periodic Tessellations
  In: Advanced Materials 23 (2011), p. 2669-2674
  ISSN: 0935-9648
  DOI: 10.1002/adma.201100268
• Rübner M., Günzl M., Körner C., Singer R.:
  Aluminium-aluminium compound fabrication by high pressure die casting
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011), p. 7024-7029
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2011.05.076
• Rübner M., Klassen A., Körner C., Singer R., Ilg J., Rupitsch S., Lerch R.:
  Dünnwandige Aluminiumdruckgussteile mit integrierten piezokeramischen Sensoren und Aktoren - Fertigung und Charakterisierung
  18. Symposium Verbundwerkstoffe und Werkstoffverbunde (Chemnitz)
  In: B. Wielage (ed.): Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde 2011
• Schwerdtfeger J., Wein F., Leugering G., Singer R., Körner C., Stingl M., Schury F.:
  Design of Auxetic Structures via Mathematical Optimization
  In: Advanced Materials 23 (2011), p. 2650--2654
  ISSN: 0935-9648
  DOI: 10.1002/adma.201004090

2010

• Körner C., Hartmann J.:
  Aluminiumgussteile mit zellularem Kern
  In: Lightweight Design (2010), p. 28-34
  ISSN: 1865-4819
  DOI: 10.1007/BF03223614
• Ponader S., von Wilmowsky C., Widenmayer M., Lutz R., Heinl P., Körner C., Singer R., Nkenke E., Neukam FW., Schlegel K.:
  In vivo performance of selective electron beam-melted Ti-6Al-4V structures
  In: Journal of Biomedical Materials Research Part A 92 (2010), p. 56-62
  ISSN: 1549-3296
  DOI: 10.1002/jbm.a.32337
• Schwerdtfeger J., Heinl P., Singer R., Körner C.:
  Auxetic cellular structures through selective electron-beam melting
  In: physica status solidi (b) 247 (2010), p. 269-272
  ISSN: 0370-1972
  DOI: 10.1002/pssb.200945513

2009

• Attar E., Körner C.:
  Lattice Boltzmann method for dynamic wetting problems
  In: Journal of Colloid and Interface Science 335 (2009), p. 84-93
  ISSN: 0021-9797
  DOI: 10.1016/j.jcis.2009.02.055
• Körner C., Attar E.:
  Numerical Simulation of Foam Solidification Phenomena
  MetFoam 2009 (Bratislava)
  In: MetFoam 2009 - Proceedings of the 6th Interational Conference on Porous Matals and Metallic Foams 2009
• Körner C., Schwerdtfeger J., Singer R.:
  Auxetic Cellular Metals
  MetFoam 2009 - 6th International Conference on Porous Metals and Metallic foams (Bratislava, 2. September 2009 - 4. September 2009)
  In: MetFoam 2009 - Proceedings of the 6th International Conference on Porous Metals and Metallic Foams 2009
• Rübner M., Körner C., Singer R.:
  Die castings with integrated PZT-modules - fabrication and functionalities
  Tagungsband IV ECCOMAS Thematic Conference on Smart Structures and Materials (Porto, 13. July 2009 - 15. July 2009)
• Rübner M., Körner C., Singer R.:
  Integration piezokeramischer Module in dünnwandige Aluminiumbauteile mittels Druckguss
  2. Wissenschaftliches Symposium Transregio-PT-PIESA (Dresden)
  In: R. Neugebauer (ed.): Großserienfähige Produktionstechnologien fuer leichtmetall- und faserverbundbasierte Komponenten mit integrierten Piezosensoren und -aktoren 2009
• Schwerdtfeger J., Heinl P., Singer R., Körner C.:
  Selective Electron Beam Melting: A new way to auxetic cellular structures
  20th Annual International Solid Freeform Fabrication Symposium, SFF 2009 (Austin, TX)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84892631091&origin=inward

2008

• Heinl P., Körner C., Singer R.:
  Mechanically Adapted Cellular Titanium for Bone Substitution
  International Symposium on Cellular Metals for Structural and Functional Applications 2008 (Dresden)
• Heinl P., Körner C., Singer R.:
  Selective electron beam melting - A novel generative manufacturing technique for cellular titanium
  5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549129261&origin=inward
• Heinl P., Körner C., Singer R.:
  Selective electron beam melting of cellular titanium: Mechanical properties
  In: Advanced Engineering Materials 10 (2008), p. 882-888
  ISSN: 1438-1656
  DOI: 10.1002/adem.200800137
• Heinl P., Müller L., Körner C., Singer R., Müller F.:
  Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
  In: Acta Biomaterialia 4 (2008), p. 1536-1544
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2008.03.013
• Ibrahim A., Körner C., Singer R.:
  The effect of TiH2 particle size on the morphology of Al-foam produced by PM process
  In: Advanced Engineering Materials 10 (2008), p. 845-848
  ISSN: 1438-1656
  DOI: 10.1002/adem.200800139
• Körner C.:
  Foam formation mechanisms in particle suspensions applied to metal foams
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 495 (2008), p. 227-235
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2007.09.089
• Körner C.:
  Integral Foam Molding of Light Metals
  Springer, 2008
  ISBN: 978-3-540-68838-9
• Ponader S., Vairaktaris E., Heinl P., von Wilmowsky C., Rottmair A., Körner C., Singer R., Holst S., Schlegel K., Neukam FW., Nkenke E.:
  Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts
  In: Journal of Biomedical Materials Research Part A 84 (2008), p. 1111-1119
  ISSN: 1549-3296
  DOI: 10.1002/jbm.a.31540
• Rübner M., Körner C., Singer R.:
  Integration of piezoceramic modules into die castings - Procedure and functionalities
  3rd International Conference on Smart Materials, Structures and Systems - Emboding Intelligence in Structures and Integrated Systems, CIMTEC 2008 (Acireale, Sicily)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=62449124626&origin=inward
• Solórzano E., Hirschmann M., Rodriguez-Perez M., Körner C., de Saja JA.:
  Thermal conductivity of AZ91 magnesium integral foams measured by the Transient Plane Source method
  In: Materials Letters 62 (2008), p. 3960-3962
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2008.05.020
• Trepper A., Körner C., Singer R.:
  Reduced Structure Borne Sound of Integral Foam Components
  11th International Conference on Aluminium Alloys 2008
  In: J. Hirsch, B. Skrotzki, G. Gottstein (ed.): Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys 2008, Weinheim: 2008
• Trepper A., Körner C., Singer R.:
  Structural damping of integral foam components
  5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549119075&origin=inward
• Wiehler H., Heinl P., Körner C., Singer R.:
  High pressure integral foam moulding of aluminium
  5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549084215&origin=inward
• Wiehler H., Körner C., Singer R.:
  High pressure integral foam moulding of aluminium - Process technology
  In: Advanced Engineering Materials 10 (2008), p. 171-178
  ISSN: 1438-1656
  DOI: 10.1002/adem.200700267

2007

• Bräutigam V., Körner C., Singer R., Kaltenbacher M., Meiler M., Lerch R.:
  Smart structural components by integration of sensor/actuator-modules in die castings
  Industrial and Commercial Applications of Smart Structures Technologies 2007 (San Diego, CA)
  DOI: 10.1117/12.705831
• Bräutigam V., Rübner M., Körner C., Singer R.:
  Druckgießtechnische Integration von piezokeramischen Modulen in Aluminiumbauteile
  1. Wissenschaftlichen Kolloquium des SFB/Transregio PT-PIESA
• Heinl P., Rottmair A., Körner C., Singer R.:
  Cellular titanium by selective electron beam melting
  In: Advanced Engineering Materials 9 (2007), p. 360-364
  ISSN: 1438-1656
  DOI: 10.1002/adem.200700025
• Hirschmann M., Körner C., Singer R.:
  Integral foam molding - A new process for foamed magnesium castings
  5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 (Vancouver)
  In: Materials Science Forum 2007

2006

• Bräutigam V., Schellack T., Körner C., Singer R.:
  Optimized fixing technique for the integration of piezoceramic moduls in die castings
  In: Gießereiforschung 58 (2006), p. 1-6
  ISSN: 0046-5933
• Bräutigam V., Wierach P., Körner C., Singer R.:
  Integration of piezoceramic modules in die castings - a new production technology
  10th Adaptronic Congress (Göttingen, 3. May 2006 - 4. May 2006)
• Körner C., Hirschmann M., Wiehler H.:
  Integral foam moulding of light metals
  In: Materials Transactions 47 (2006), p. 2188-2194
  ISSN: 1345-9678
  DOI: 10.2320/matertrans.47.2188
• Körner C., Hirschmann M., Wiehler H., Trepper A., Singer R.:
  Integralschaumgießen von Leichtmetallen
  Industriekolloquium 2006 des SFB 396
• Thürey N., Pohl T., Rüde U., Oechsner M., Körner C.:
  Optimization and Stabilization of LBM Free Surface FlowSimulations using Adaptive Parameterization
  In: Computers & Fluids 35 (2006), p. 934-939
  ISSN: 0045-7930
  URL: http://www.sciencedirect.com/science/article/pii/S004579300500157X/pdfft?md5=59701b54104d0daae6791fd1b2140ffa&pid=1-s2.0-S004579300500157X-main.pdf

2005

• Bräutigam V., Körner C., Singer R.:
  Herstellungsverfahren für druckgegossene multifunktionale Verbundbauteile
  In: Giesserei 92 (2005), p. 46-49
  ISSN: 0016-9765
• Euteneuer T., Körner C., Singer R.:
  Magnesium-Keramik-Durchdringungswerkstoffe: Einfluss der Morphologie der keramischen Verstärkungsphase
  15. Symposiums Verbundwerkstoffe und Werkstoffverbunde (Kassel)
  In: M. Schlimmer (ed.): Verbundwerkstoffe und Werkstoffverbunde 2005: Vortragstexte des 15. Symposiums Verbundwerkstoffe und Werkstoffverbunde 2005
• Hirschmann M., Körner C., Singer R.:
  Injection Moulding of Magnesium Integral Foams
  International Symposium on Cellular Metals and Polymers (Fürth)
  In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers, Zürich: 2005
• Hirschmann M., Körner C., Singer R.:
  Integralschäume aus Magnesiumlegierungen
  In: Gießereiforschung 57 (2005), p. 8-14
  ISSN: 0046-5933
• Hirschmann M., Wiehler H., Körner C., Singer R.:
  Light metal integral foam - a promising material for structural applications
  CELLMET 2005 (Dresden)
  In: G. Stephani, B. Kieback (ed.): Proceedings of the International Symposium on Cellular metals for Structural and Functional Applications 2005 2005
• Ibrahim A., Körner C., Singer R.:
  Investigation of Micropore Creation on the PM-foam Mophology
  International Symposium on Cellular Metals and Polymers (Fürth)
  In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers, Zürich: 2005
• Körner C., Arnold M., Singer R.:
  Metal foam stabilization by oxide network particles
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 396 (2005), p. 28-40
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2005.01.001
• Körner C., Pohl T., Rüde U., Thürey N., Hofmann T.:
  FreeWIHR: Lattice Boltzmann Methods with Free Surfaces and their Application in Material Technology
  KONWIHR Results Workshop (Garching)
  In: High Performance Computing in Science and Engineering, Garching 2004, Berlin/Heidelberg: 2005
• Körner C., Pohl T., Rüde U., Thürey N., Zeiser T.:
  Parallel Lattice Boltzmann Methods for CFD Applications
  In: Numerical Solution of Partial Differential Equations on Parallel Computers, New York: Springer, 2005, p. 439-465 (Lecture Notes in Computational Science and Engineering, Vol.51)
  ISBN: 3-540-29076-1
  URL: https://www10.informatik.uni-erlangen.de/Publications/Papers/2005/LBMCFD_LNCSE51.pdf
• Körner C., Thies M., Hofmann T., Thürey N., Rüde U.:
  Lattice Boltzmann Model for Free Surface Flow for Modeling Foaming
  In: Journal of Statistical Physics 121 (2005), p. 179-196
  ISSN: 0022-4715
  DOI: 10.1007/s10955-005-8879-8
  URL: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.321.499&rep=rep1&type=pdf
• Oechsner M., Thies M., Arnold M., Körner C., Singer R.:
  Simulation of Metal Foam Formation with the Lattice Boltzmann Method
  International Symposium on Cellular Metals and Polymers (Fürth)
  In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (ed.): Cellular Metals and Polymers, Zürich: 2005
• Singer R., Körner C., Altstädt V., Münstedt H.:
  Cellular Metals and Polymers
  Zürich: Trans Tech Publications LTD, 2005
  ISBN: 0-87849-941-x
• Thürey N., Rüde U., Körner C.:
  Interactive Free Surface Fluids with the Lattice Boltzmann Method
  (2005), p. 10
  URL: https://www10.cs.fau.de/publications/reports/TechRep_2005-04.pdf
  (Techreport)

2004

• Hirschmann M., Lamm M., Körner C., Singer R.:
  Magnesium Integral Foams: Production and Properties
  6th International Conference Magnesium Alloys and Their Applications (Wolfsburg)
  In: K. U. Kainer (ed.): Proceedings of the 6th International Conference Magnesium Alloys and Their Applications, Weinheim: 2004
• Körner C., Hirschmann M., Bräutigam V., Singer R.:
  Endogenous particle stabilization during magnesium integral foam production
  In: Advanced Engineering Materials 6 (2004), p. 385-390
  ISSN: 1438-1656
  DOI: 10.1002/adem.200405147
• Körner C., Pohl T., Rüde U., Thürey N., Hofmann T.:
  FreeWiHR --- LBM with Free Surfaces
  (2004), p. 15
  URL: https://www10.cs.fau.de/publications/reports/TechRep_2004-06.pdf
  (Techreport)
• Körner C., Thies M.:
  Foaming of Light Metals: Mechanisms and Numerical Modelling
  3rd International Conference "Computational Modeling and Simulation of Materials" (Acireale)
  In: P. Vincenzini (ed.): Advances in Science and Technology Vol. 43, Proceeding of the 3rd Conference "Computational Modeling and Simulation of Materials, Part B" 2004

2003

• Arnold M., Körner C., Singer R.:
  PM aluminium foams: Stabilizing mechanisms and optimization
  MetFoam 2003 (Berlin, 23. June 2003 - 25. June 2003)
  In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Foaming Technology, Berlin: 2003
• Brunnbauer M., Hirschmann M., Körner C., Singer R.:
  Gießtechnische Herstellung von Leichtmetallbauteilen mit zellularem Kern
  In: M. Geiger, G. W. Ehrenstein (ed.): Robuste, verkürzte Prozessketten für flächige Leichtbauteile, Bamberg: Meisenbach-Verlag, 2003, p. 57-69
• Brunnbauer M., Körner C., Singer R.:
  Encasing of aluminium foam with magnesium by die casting
  MetFoam 2003 (Berlin, 23. June 2003 - 25. June 2003)
  In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Metal Foaming Technology, Berlin: 2003
• Körner C., Hirschmann M., Lamm M., Singer R.:
  Magnesium integral foams
  MetFoam 2003 (Berlin, 23. June 2003 - 25. June 2003)
  In: J. Banhart, N. A. Fleck (ed.): Cellular Metals and Metal Foaming Technology, Berlin: 2003
• Rüde U., Thürey N., Körner C., Pohl T.:
  Simulation von Metallschaum mittels der Lattice-Boltzmann Methode
  35 (2003), p. 4-8
  (Techreport)
• Singer R., Körner C., Rosiwal S.:
  From New Materials to Finished Components - Metals Research at the WTM institute of the University of Erlangen-Nuernberg
  In: Maschinenbau in Bayern 2003, 2003, p. 46-49
  (anderer)
• Ströhla S., Winter W., Kuhn G., Brunnbauer M., Hirschmann M., Körner C., Singer R., Dörfler SM., Otto A.:
  Metallschaumverbundstrukturen - Prozesstechnologie und werkstoffmechanische Analyse
  Robuste verkürzte Prozessketten für flächige Leichtbauteile (Erlangen)
  In: Robuste verkürzte Prozessketten für flächige Leichtbauteile, Industriekolloquium 2003 des SFB 396, Bamberg: 2003

2002

• Körner C., Heinrich F., Singer R.:
  Encasing by Casting
  In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, p. 103-113
  ISBN: 3-527-30339-1
• Körner C., Ottmüller M., Singer R., Popovska N., Schmidt S., Gerhard H.:
  Optimierung von Kohlenstofflangfaser/AZ91 Verbunden durch eine pyroC/TiN-Doppelbeschichtung
  Verbundwerkstoffe und Werkstoffverbunde (Chemnitz, 5. September 2001 - 7. September 2001)
  In: B. Wielage, G. Leonhardt (ed.): Verbundwerkstoffe und Werkstoffverbunde, Chemnitz: 2002
  URL: http://www.wileyeurope.com/cda/product/0,,3527303197,00.html
• Körner C., Singer R.:
  Foaming Processes for Aluminum
  In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, p. 8-14
  ISBN: 3-527-30339-1
• Körner C., Singer R.:
  The Physics of Foaming: Structure Formation and Stability
  In: B. Kriszt, H. P. Degischer (ed.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, p. 33-43
  ISBN: 3-527-30339-1
• Körner C., Thies M., Singer R.:
  Modeling of metal foaming with lattice Boltzmann automata
  In: Advanced Engineering Materials 4 (2002), p. 765-769
  ISSN: 1438-1656
  DOI: 10.1002/1527-2648(20021014)4:103.0.CO;2-M
• Olurin O., Arnold M., Körner C., Singer R.:
  The investigation of morphometric parameters of aluminium foams using micro-computed tomography
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 328 (2002), p. 334-343
  ISSN: 0921-5093
  DOI: 10.1016/S0921-5093(01)01809-3

2001

• Eitschberger M., Körner C., Singer R.:
  Schleudergießen von Metall-Keramik-Verbundwerkstoffen bei hohen Drehzahlen und Temperaturen
  Verbundwerkstoffe und Werkstoffverbunde (Chemnitz, 5. September 2001 - 7. September 2001)
  In: B. Wielage, G. Leonhardt (ed.): Verbundwerkstoffe und Werkstoffverbunde, Weinheim: 2001
• Heinrich F., Körner C., Singer R.:
  Encasing of aluminium foams by die casting: foam core properties and core fixing
  Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001) (Bremen)
  In: Metal Foams and Porous Metal Structures, Bremen: 2001
  URL: http://www.mit-verlag.de/b111.html
• Körner C., Thies M., Arnold M., Singer R.:
  Modelling of metal foaming by in-situ gas formation.
  MetFoam 2001 (Bremen, 18. June 2001 - 20. June 2001)
  In: J. Banhart, M. F. Ashby, N. A. Fleck (ed.): Cellular Metals and Foaming Technology, Bremen: 2001

2000

• Arnold M., Körner C., Thies M., Singer R.:
  Experimental and Numerical Investigation of the Formation of Metal Foam
  Materials Week 2000 (München, 25. September 2000 - 28. September 2000)
• Heinrich F., Körner C., Singer R.:
  Encasing of Al-foams by Die Casting as Manufacturing Process for Light Weight Components
  Materials Week 2000 (München, 25. September 2000 - 28. September 2000)
• Heinrich F., Körner C., Singer R.:
  Herstellung flächiger Leichtbauteile durch Umgießen von Aluminium-Schäumen im Druckgießverfahren
  In: Materialwissenschaft und Werkstofftechnik 32 (2000), p. 428-431
  ISSN: 0933-5137
• Heinrich F., Körner C., Singer R.:
  Production of flat light-weight structural components by recasting of aluminum foams
• Körner C., Berger F., Arnold M., Stadelmann CG., Singer R.:
  Influence of processing conditions on morphology of metal foams produced from metal powder
  In: Materials Science and Technology 16 (2000), p. 781-784
  ISSN: 0267-0836
• Körner C., Heinrich F., Singer R., Otto A., Schöberl T., Geiger M.:
  Herstellung flächiger Verbundbauteile mit Metallschaumkernen
  Sonderforschungsbereich 396 - robuste verkürzte Prozessketten für flächige Leichtbauteile - 1. Berichtskolloquium (Bamberg, 24. May 2000 - 25. May 2000)
  In: Geiger, M.; Ehrenstein, G.W. (ed.): Sonderforschungsbereich 396 - robuste verkürzte Prozessketten für flächige Leichtbauteile - 1. Berichtskolloquium 24./25.Mai 2000
• Körner C., Schäff W., Ottmüller M., Singer R.:
  Carbon Long Fiber Reinforced Magnesium Alloys
  In: Advanced Engineering Materials 2 (2000), p. 327-337
  ISSN: 1438-1656
• Körner C., Singer R.:
  Processing of Metal Foams - Challenges and Opportunities
  In: Advanced Engineering Materials 2 (2000), p. 159-165
  ISSN: 1438-1656

1999

• Körner C., Singer R.:
  Numerical Simulation of Foam Formation and Evolution with Modified Cellular Automata
  MetFoam '99 (Bremen)
  In: J. Banhart, M. F. Ashby, N. A. Fleck (ed.): Metal Foams and Porous Metal Structures, Bremen: 1999
• Ottmüller M., Körner C., Singer R.:
  Influence of the Fiber-Matrix Interface on the Strength of Unidirectional Carbon Fiber Reinforced Magnesium Composites
  Euromat 99 (München)
  In: Metal Matrix Composites and Foam 1999
• Schäff W., Hagenbruch M., Körner C., Singer R.:
  Fabrication process for continuous magnesium/carbon-fibre composites with graded fibre content
  Proceedings of the 1998 5th International Symposium on Functionally Graded Materials, FGM '98 (Dresden)
  In: Proceedings of the 1998 5th International Symposium on Functionally Graded Materials, FGM '98, Uetikon-Zuerich, Switzerland: 1999
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032676217&origin=inward
• Schäff W., Heinrich F., Körner C., Singer R.:
  Thermal Fatigue of Locally Fiber Reinforced Magnesium with Graded Structure
  12th International Conference on Composite Materials (Paris)
• Schäff W., Heinrich F., Körner C., Singer R.:
  Thermische Ermüdung von lokal verstärkten Magnesium-Kohlenstoff-Verbundwerkstoffen mit gradierter Struktur
  Verbundwerkstoffe und Werkstoffverbunde (Hamburg, 3. October 1999 - 7. October 1999)
  In: K. Schulte, K. U. Kainer (ed.): Verbundwerkstoffe und Werkstoffverbunde 1999

1998

• Körner C., Bergmann HW.:
  The physical defects of the hyperbolic heat conduction equation
  In: Applied Physics A-Materials Science & Processing 67 (1998), p. 397-401
  ISSN: 0947-8396
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032181110&origin=inward

1997

• Körner C.:
  Theoretische Untersuchungen zur Wechselwirkung von ultrakurzen Laserpulsen mit Metallen (Dissertation, 1997)

1996

• Bergmann HW., Körner C., Hartmann M., Mayerhofer R.:
  Precision machining with copper vapour lasers
  NATO Proc. Advanced Workshop, Pulsed Metal Vapor Lasers
• Körner C., Bergmann HW.:
  Theoretical description of laser ablation
• Körner C., Bergmann HW.:
  Thermal and Mechanical Aspects in Short Pulse Laser Interaction with Metals
  European Conference on Laser Treatment of Materials 1996 (Stuttgart)
• Körner C., Mayerhofer R., Hartmann M., Bergmann HW.:
  Physical and material aspects in using visible laser pulses of nanosecond duration for ablation
  In: Applied Physics A-Materials Science & Processing 63 (1996), p. 123-131
  ISSN: 0947-8396
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0030214563&origin=inward
• Müller K., Körner C., Bergmann HW.:
  Numerische Simulation der Eigenspannungen und Deformationen beim Laserstrahlrandschichthärten
  In: Härterei-Technische Mitteilungen 51 (1996), p. 19-28
  ISSN: 0017-6583
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=4243138582∨igin=inward

1995

• Bergmann HW., Hartmann M., Mayerhofer R., Körner C.:
  Kupferdampflaser für die Mikromaterialbearbeitung
  In: Laser '95, 1995, p. 231-237
• Hilbinger RM., Mayer S., Körner C., Bergmann HW.:
  Eigenspannungen beim Laserstrahlschweißen verschiedender Baustähle
  In: Härterei-Technische Mitteilungen 50 (1995), p. 380-386
  ISSN: 0017-6583
• Körner C., Bergmann HW.:
  Theoretical Descreption of Laser Ablation and its Application on Precision Machining
  Laser Processing: Surface Treatment and Film Deposition (Sesimbra)
  In: Proceedings of the NATO ASI 1995

1994

• Domes J., Körner C., Bergmann HW.:
  Residual stresses in laser hardened steels and their numerical simulation
  European Conference on Laser Treatment of Materials 1994
• Körner C., Müller K., Domes J., Damaschek R., Bergmann HW.:
  Experimental and numerical determination of distortion of laser hardened steels
  International Symposium on Metals Science: Numerical Predictions of Deformation Processes and the Behaviour of Real Materials (Roskilde)
• Wang HM., Stiele H., Lang A., Körner C., Bergmann HW.:
  Surface remelting of ductile iron with a high power pulsed Nd:YAG laser
  High Power Lasers and Laser Applications V (Wien)