Köpf, Johannes

2023

• Mergheim J., Breuning C., Burkhardt C., Hübner D., Köpf J., Herrnböck L., Yang Z., Körner C., Markl M., Steinmann P., Stingl M.:
  Additive manufacturing of cellular structures: Multiscale simulation and optimization
  In: Journal of Manufacturing Processes 95 (2023), S. 275-290
  ISSN: 1526-6125
  DOI: 10.1016/j.jmapro.2023.03.071

2021

• Kergaßner A., Köpf J., Markl M., Körner C., Mergheim J., Steinmann P.:
  A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials
  In: Journal of Materials Engineering and Performance (2021)
  ISSN: 1059-9495
  DOI: 10.1007/s11665-021-05725-0

2019

• Köpf J., Soldner D., Ramsperger M., Mergheim J., Markl M., Körner C.:
  Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
  In: Computational Materials Science 162 (2019), S. 148-155
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2019.03.004

2018

• Hübner D., Gotterbarm M., Kergaßner A., Köpf J., Pobel C., Markl M., Mergheim J., Steinmann P., Körner C., Stingl M.:
  Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
  iCAT 2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
  In: Proceedings of 7th International Conference on Additive Technologies 2018
• Köpf J., Gotterbarm M., Markl M., Körner C.:
  3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
  In: Acta Materialia 152 (2018), S. 119-126
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.04.030
• Köpf J., Rasch M., Meyer A., Markl M., Schmidt M., Körner C.:
  3D grain growth simulation and experimental verification in laser beam melting of IN718
  10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth, 4. September 2018 - 6. September 2018)
  In: Procedia CIRP 74 (2018) 2018
  DOI: 10.1016/j.procir.2018.08.034
  URL: https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf

2017

• Köpf J., Markl M., Körner C.:
  3D multilayer grain structure simulation for beam-based additive manufacturing
  2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, DEU, 11. Oktober 2017 - 13. Oktober 2017)
  In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017

2016

• Köpf J., Rai A., Markl M., Körner C.:
  3D Grain Structure Simulation for Beam-Based Additive Manufacturing
  6th International Conference on Additive Technologies iCAT (Nürnberg, 29. November 2017 - 30. November 2016)
  In: Proceedings of the 6th International Conference on Additive Technologies iCAT 2016 2016

2013

• Hilbinger RM., Köpf J., Rübner M., Singer R.:
  Automatische Optimierung der Kolbenvorlaufgeschwindigkeit beim Druckgiessen durch numerische Simulation
  In: Giesserei 100 (2013), S. 36-42
  ISSN: 0016-9765

2012

• Hilbinger RM., Köpf J., Rübner M., Singer R.:
  Computational optimisation of plunger movement during slow shot phase in high pressure diecasting
  In: Foundry Trade Journal International 186 (2012), S. 291-294
  ISSN: 1758-9789
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84870726107&origin=inward

2011

• Hilbinger RM., Lohmüller A., Köpf J., Singer R.:
  Predicting defects and material quality in castings by means of computational determination of flow length values
  In: International Journal of Cast Metals Research 24 (2011), S. 96-101
  ISSN: 1364-0461
  DOI: 10.1179/1743133610Y.0000000005

2005

• Hilbinger RM., Köpf J., Lohmüller A., Scharrer M., Hartmann M., Singer R.:
  Vermeidung von Gussfehlern - Prognose von Eigenschaften durch Modellierung
  In: Druckguss 2/2005 (2005), S. 59-64
  ISSN: 1619-2478