Greiner, Sandra

2023

• Baumgärtner B., Rothfelder R., Greiner S., Breuning C., Renner J., Schmidt M., Drummer D., Körner C., Markl M., Hausotte T.:
  Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography
  In: Journal of Manufacturing and Materials Processing (2023)
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030095
• Drummer D., Schlicht S., Greiner S.:
  Additive Manufacturing of Functionalized Material Systems for Medical Applications: Potentials and Challenges in Additive Manufacturing
  8th International Conference on Additive Technologies iCAT 2023 (Maribor, Slowenien, 19. April 2023 - 22. April 2023)
  In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
  DOI: 10.1007/978-3-031-37671-9_23
• Greiner S., Schlicht S., Drummer D.:
  Understanding geometry dependent temperature fields in laser powder bed fusion of PA12 by means of infrared thermal imaging
  8th International Conference on Additive Technologies iCAT (Maribor, Slowenien, 19. April 2023 - 22. April 2023)
  In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
  DOI: 10.1007/978-3-031-37671-9_2
• Lotter S., Brand L., Jamali V., Schäfer M., Loos H., Unterweger H., Greiner S., Kirchner J., Alexiou C., Drummer D., Fischer G., Büttner A., Schober R.:
  Experimental Research in Synthetic Molecular Communications - Part I
  In: IEEE Nanotechnology Magazine (2023), S. 1-12
  ISSN: 1942-7808
  DOI: 10.1109/MNANO.2023.3262100
• Lotter S., Brand L., Jamali V., Schäfer M., Loos HM., Unterweger H., Greiner S., Kirchner J., Alexiou C., Drummer D., Fischer G., Buettner A., Schober R.:
  Experimental Research in Synthetic Molecular Communications - Part II
  In: IEEE Nanotechnology Magazine (2023), S. 1-12
  ISSN: 1942-7808
  DOI: 10.1109/MNANO.2023.3262377

2022

• Drummer D., Greiner S., Grützmacher C., Jiang F., Kleffel T., Romeis M., Schlicht S., Wolf M.:
  Neue Werkstoffe und Prozesse für die additive Fertigung
  In: Jahresmagazin Ingenieurwissenschaften (2022)
  ISSN: 1618-8357
  Open Access: https://institut-wv.de/wp-content/uploads/sites/9/2022/10/096-681_WAK-Kunststoff_2022.pdf
• Greiner S., Drummer D.:
  Understanding aspect ratio effects in Laser Powder Bed Fusion of polyamide 12 by means of infrared thermal imaging
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.060
• Schlicht S., Greiner S., Drummer D.:
  Low Temperature Powder Bed Fusion of Polymers by Means of Fractal Quasi-Simultaneous Exposure Strategies
  In: Polymers 14 (2022), Art.Nr.: 1428
  ISSN: 2073-4360
  DOI: 10.3390/polym14071428

2021

• Greiner S., Jaksch A., Cholewa S., Drummer D.:
  Development of material-adapted processing strategies for laser sintering of polyamide 12
  In: Advanced Industrial and Engineering Polymer Research (2021)
  DOI: 10.1016/j.aiepr.2021.05.002
• Greiner S., Jaksch A., Drummer D.:
  Materialangepasste Prozessstrategien für das Lasersintern von Kunststoffen
  27. Technomer - Fachtagung über Verarbeitung und Anwendung von Polymeren (Technische Universität Chemnitz, 4. November 2021 - 5. November 2021)
• Greiner S., Schlicht S., Drummer D.:
  Temperaturfeldhomogenisierung durch fraktale Belichtungsstrategien im Lasersintern von Kunststoffen
  Rapid.Tech (, 22. Juni 2021 - 23. Juni 2021)
  In: Proceedings of the 17th Rapid.Tech Conference 2021
  DOI: 10.3139/9783446471733.015

2020

• Greiner S., Drummer D.:
  Infrared monitoring of modified hatching strategies for laser sintering of polymers
  11th CIRP Conference on Photonic Technologies / LANE 2020 (, 6. September 2020 - 10. September 2020)
  In: Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.09.018
• Greiner S., Jaksch A., Drummer D.:
  Understanding Cylinder Temperature Effects in Laser Beam Melting of Polymers
  1st International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020 (, 19. Mai 2020 - 20. Mai 2020)
  In: Lecture Notes in Mechanical Engineering 2020
  DOI: 10.1007/978-3-030-70332-5_12
• Heinl M., Greiner S., Wudy K., Pobel C., Rasch M., Huber F., Papke T., Merklein M., Schmidt M., Körner C., Drummer D., Hausotte T.:
  Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
  In: Measurement Science and Technology 31 (2020), S. 1-14
  ISSN: 1361-6501
  DOI: 10.1088/1361-6501/ab89e2
• Soldner D., Greiner S., Burkhardt C., Drummer D., Steinmann P., Mergheim J.:
  Numerical and experimental investigation of the isothermal assumption in selective laser sintering of PA12
  In: Additive Manufacturing (2020)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101676

2019

• Drummer D., Greiner S., Zhao M., Wudy K.:
  A novel approach for understanding laser sintering of polymers
  In: Additive Manufacturing 27 (2019), S. 379-388
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.03.012
• Greiner S., Lanzl L., Wudy K., Drummer D.:
  A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers
  PPS (Polymer Processing Society) (Dresden, 26. Juni 2017 - 29. Juni 2017)
  In: AIP Conference Proceedings 2055 2019
  DOI: 10.1063/1.5084907
• Greiner S., Wudy K., Wörz A., Drummer D.:
  Thermographic investigation of laser-induced temperature fields in selective laser beam melting of polymers
  In: Optics and Laser Technology 109 (2019), S. 569-576
  ISSN: 0030-3992
  DOI: 10.1016/j.optlastec.2018.08.010
• Lanzl L., Wudy K., Greiner S., Drummer D.:
  Selective laser sintering of copper filled polyamide 12: powder properties and process behavior
  In: Polymer Composites 40 (2019), S. 1801-1809
  ISSN: 0272-8397
  DOI: 10.1002/pc.24940

2018

• Drexler M., Greiner S., Lexow M., Lanzl L., Wudy K., Drummer D.:
  Selective laser melting of polymers: Influence of powder coating on mechanical part properties
  In: Journal of Polymer Engineering 38 (2018), S. 667-674
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2017-0133
• Greiner S., Lanzl L., Zhao M., Wudy K., Drummer D.:
  Influence of powder bed surface on part properties produced by selective laser beam melting of polymers
  7th International Conference on Additive Technologies - iCAT 2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
  In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
• Greiner S., Soldner D., Jaksch A., Zhao M., Mergheim J., Steinmann P., Wudy K., Drummer D.:
  Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen
  6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 13. Dezember 2018 - 13. Dezember 2018)
• Lanzl L., Greiner S., Wudy K., Drummer D.:
  Glass-Filled Polypropylene-Systems for Enhancing Reproducibility during Selective Laser Beam Melting and Effect of the Mixing Strategy on Powder Properties
  7th International Conference on Additive Technologies - iCAT2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
  In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
• Wudy K., Greiner S., Zhao M., Drummer D.:
  Selective laser beam melting of polymers: In situ and offline measurements for process adapted thermal characterization
  In: Procedia CIRP 74 (2018), S. 238-243
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2018.08.102
• Zhao M., Greiner S., Wudy K., Schmidt J., Peukert W., Drummer D.:
  Pulverschüttungsanalyse für das selektive Laser-Sintern mittels Computertomographie
  Rapid Tech (Erfurt, 5. Juni 2018 - 7. Juni 2018)
  In: Proceedings of the 15th Rapid.Tech Conference 2018
  DOI: 10.3139/9783446458123.019

2017

• Braun T., Greiner S., Baierl U., Drummer D., Franke J.:
  Additive Metallisierung von im Spritzguss hergestellten Keramiken mittels Plasma-Coating-Technologie
  In: PLUS - Produktion von Leiterplatten und Systemen 19 (2017), S. 985-1144
• Braun T., Greiner S., Diepgen A., Schröppel K., Drummer D., Franke J.:
  ADDITIVE METALLIZATION OF INJECTION MOLDED CERAMIC COMPONENTS BY A PLASMA-COATING PROCESS
  SMTA Pan Pacific Microelectronics Symposium (Kauai, Hawaii, 6. Februar 2017 - 9. Februar 2017)
  In: IEEE (Hrsg.): Proceedings of the SMTA Pan Pacific Microelectronics Symposium, 2017 2017
• Greiner S., Kurth K., Fix C., Braun T., Franke J., Drummer D.:
  Influence of Material and Processing Parameters on the Surface Roughness of Injection-Molded Ceramic Parts
  In: Journal of Ceramic Science and Technology 08 (2017), S. 227-286
  ISSN: 2190-9385
  DOI: 10.4416/JCST2017-00009
• Greiner S., Lanzl L., Wudy K., Drexler M., Drummer D.:
  Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen
  Rapid Tech 2017 (Erfurt, 20. Juni 2017 - 22. Juni 2017)
  In: Proceedings of Rapid Tech 2017 2017
• Greiner S., Wudy K., Lanzl L., Drummer D.:
  Selective laser sintering of polymer blends: Bulk properties and process behavior
  In: Polymer Testing 64 (2017), S. 136-144
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2017.09.039
• Lanzl L., Wudy K., Greiner S., Drummer D.:
  Selektives Laserstrahlschmelzen von glasfasergefüllten Polymersystemen
  5. Industriekolloquium des SFB 814 (Nürnberg, 12. Dezember 2017 - 12. Dezember 2017)
  In: 5. Industriekolloquium des SFB 814 2017

2016

• Braun T., Greiner S., Franke J., Drummer D.:
  Additive Plasma Metallization of Spatial Ceramic Injection Molded Components
  In: 12th International Congress Molded Interconnect Devices, 2016, S. 62--67
• Braun T., Greiner S., Franke J., Drummer D.:
  Additive Plasma Metallization of Spatial Ceramic Injection Molded Components
  12th International Congress Molded Interconnect Devices (Würzburg, 28. September 2016 - 29. September 2016)
  In: 12th International Congress Molded Interconnect Devices (MID): Scientific Proceedings 2016
  DOI: 10.1109/ICMID.2016.7738930
• Lanzl L., Greiner S., Wudy K., Drummer D.:
  Selective laser sintering of a polypropylene polyamide 12 blend: Bulk and component properties
  iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
  In: Proceedings of 6th International Conference on Additive Technologies 2016