Dechet, Maximilian

Maximilian Dechet, M.Sc.

Institute of Particle Technology (LFG)

Raum 02.803
Haberstraße 9a
91058 Erlangen

Telefon: +49 9131 85-20367
E-Mail: maximilian.dechet@fau.de
Webseite: https://www.lfg.tf.fau.de/person/dechet-maximillian-m-sc/

2022

Unger L., Dechet M., Fischer S., Schmidt J., Bück A.:
Parameter study for the production of semi-crystalline polyetherimide particles via liquid-liquid phase separation and precipitation
12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4. September 2022 - 8. September 2022)
In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.08.059
Unger L., Dechet M., Fischer S., Schmidt J., Bück A.:
Semi‐Crystalline Polyetherimide Microparticles via Liquid‐Liquid Phase Separation and Precipitation
In: Macromolecular Materials and Engineering (2022), S. 2100797
ISSN: 1438-7492
DOI: 10.1002/mame.202100797

2021

Dechet M., Gomez Bonilla JS., Grünewald M., Popp K., Rudloff J., Lang M., Schmidt J.:
A novel, precipitated polybutylene terephthalate feedstock material for powder bed fusion of polymers (PBF): Material development and initial PBF processability
In: Materials & Design 197 (2021), Art.Nr.: 109265
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.109265
Schmidt J., Dechet M.:
Flüssig-Flüssig-Phasentrennung und Fällung zur Herstellung neuartiger Ausgangsmaterialien für das pulverbettbasierte Schmelzen von Polymeren
17th Rapid.Tech 3D Conference (Erfurt, 22. Juni 2021 - 23. Juni 2021)
In: Proceedings of the 17th Rapid.Tech 3D Conference Erfurt, Germany, 22–23 June 2021 2021
DOI: 10.3139/9783446471733.001

2020

Dechet M., Baumeister I., Schmidt J.:
Development of polyoxymethylene particles via the solution-dissolution process and application to the powder bed fusion of polymers
In: Materials 13 (2020), Art.Nr.: 1535
ISSN: 1996-1944
DOI: 10.3390/ma13071535
Dechet M., Demina A., Römling L., Gomez Bonilla JS., Lanyi F., Schubert DW., Bück A., Peukert W., Schmidt J.:
Development of poly(L-lactide) (PLLA) microspheres precipitated from triacetin for application in powder bed fusion of polymers
In: Additive Manufacturing 32 (2020), Art.Nr.: 100966
ISSN: 2214-7810
DOI: 10.1016/j.addma.2019.100966
Dechet M., Schmidt J.:
On the development of polymer particles for laser powder bed fusion via precipitation
In: Procedia CIRP 94 (2020), S. 95-99
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.09.019
Gomez Bonilla JS., Dechet M., Schmidt J., Peukert W., Bück A.:
Thermal rounding of micron-sized polymer particles in a downer reactor: direct vs indirect heating
In: Rapid Prototyping Journal (2020)
ISSN: 1355-2546
DOI: 10.1108/RPJ-01-2020-0008
Gomez Bonilla JS., Szymczak T., Zhou X., Schrüfer S., Dechet M., Schmuki P., Schubert DW., Schmidt J., Peukert W., Bück A.:
Improving the coloring of polypropylene materials for powder bed fusion by plasma surface functionalization
In: Additive Manufacturing 34 (2020), Art.Nr.: 101373
ISSN: 2214-7810
DOI: 10.1016/j.addma.2020.101373

2019

Dechet M., Goblirsch A., Romeis S., Zhao M., Lanyi F., Kaschta J., Schubert DW., Drummer D., Peukert W., Schmidt J.:
Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
In: Chemical Engineering Science 197 (2019), S. 11-25
ISSN: 0009-2509
DOI: 10.1016/j.ces.2018.11.051
Dechet M., Kloos S., Peukert W., Schmidt J.:
Formation of spherical micron-sized polyamide particles for additive manufacturing via liquid-liquid phase separation
33rd International Conference of the Polymer Processing Society, PPS 2017 (Cancun, MEX, 10. Dezember 2017 - 14. Dezember 2017)
In: Octavio Manero, Fausto Calderas (Hrsg.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5121696
Dechet M., Kloos S., Peukert W., Schmidt J.:
Production of Spherical Micron-Sized Polymer Particles for Additive Manufacturing by Liquid Phase Processes
Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden, 27. Juni 2017 - 29. Juni 2017)
In: Proceedings of the Europe/Africa Conference Dresden 2017 Polymer Processing Society PPS, MELVILLE: 2019
DOI: 10.1063/1.5084905
Dechet M., Lanzl L., Werner Y., Drummer D., Bück A., Peukert W., Schmidt J.:
Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf
Dechet M., Lanzl L., Wilden A., Sattes MM., Drummer D., Peukert W., Schmidt J.:
Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf
Hesse N., Dechet M., Gomez Bonilla JS., Lübbert C., Roth S., Bück A., Schmidt J., Peukert W.:
Analysis of tribo-charging during powder spreading in selective laser sintering: Assessment of polyamide 12 powder ageing effects on charging behavior
In: Polymers 11 (2019), Art.Nr.: 609
ISSN: 2073-4360
DOI: 10.3390/polym11040609
Rasch M., Heberle J., Dechet M., Bartels D., Gotterbarm M., Klein L., Gorunov A., Schmidt J., Körner C., Peukert W., Schmidt M.:
Grain Structure Evolution of Al–Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties
In: Materials 13 (2019)
ISSN: 1996-1944
DOI: 10.3390/ma13010082
Schmidt J., Dechet M., Gomez Bonilla JS., Bück A., Peukert W.:
Process Routes towards Novel Polybutylene Terephthalate – Polycarbonate Blend Powders for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/068 Process Routes towards Novel Polybutylene Terephth.pdf
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/068 Process Routes towards Novel Polybutylene Terephth.pdf
Schmidt J., Dechet M., Gomez Bonilla JS., Hesse N., Bück A., Peukert W.:
Characterization of Polymer Powders for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
Schmidt J., Dechet M., Gomez Bonilla JS., Kloos S., Wirth KE., Peukert W.:
Novel process routes towards the production of spherical polymer powders for selective laser sintering
33rd International Conference of the Polymer Processing Society, PPS 2017 (Cancun, MEX, 10. Dezember 2017 - 14. Dezember 2017)
In: Octavio Manero, Fausto Calderas (Hrsg.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5121697
Stichel T., Brachmann C., Raths M., Dechet M., Schmidt J., Peukert W., Frick T., Roth S.:
Electrophotographic Multilayer Powder Pattern Deposition for Additive Manufacturing
In: JOM Journal of the Minerals, Metals and Materials Society (2019)
ISSN: 1047-4838
DOI: 10.1007/s11837-019-03965-z
Wudy K., Schmidt J., Lanzl L., Zhao M., Jaksch A., Dechet M., Hesse N., Drummer D., Peukert W.:
Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization
7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
In: Dietmar Drummer (Hrsg.): Vom Pulver zum multifunktionalen Bauteil 2019

2018

Dechet M., Gomez Bonilla JS., Lanzl L., Drummer D., Bück A., Schmidt J., Peukert W.:
Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
In: Polymers 10 (2018), Art.Nr.: 1373
ISSN: 2073-4360
DOI: 10.3390/polym10121373
Dechet M., Zhao M., Drummer D., Peukert W., Schmidt J.:
Herstellung und Charakterisierung von Pulvern für das selektive Laserstrahlschmelzen von Kunststoffen aus Flüssigphasenprozessen am Beispiel von PA11
6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
In: Dietmar Drummer (Hrsg.): 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung, Erlangen: 2018
Kloos S., Dechet M., Peukert W., Schmidt J.:
Production of spherical semi-crystalline polycarbonate microparticles for Additive Manufacturing by liquid-liquid phase separation
In: Powder Technology 335 (2018), S. 275-284
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.05.005