Steinmann, Paul
Prof. Dr.-Ing. habil. Paul Steinmann
2026
- , , , :
 Modeling strain hardening in glassy polymers based on the microscopic mechanisms revealed by molecular dynamic simulations
 In: Journal of the Mechanics and Physics of Solids 206 (2026), S. 106384
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2025.106384
2025
- , , , :
 Plane stress finite element modelling of arbitrary compressible hyperelastic materials
 In: Acta Mechanica (2025), Art.Nr.: 114756
 ISSN: 0001-5970
 DOI: 10.1007/s00707-025-04310-z
- , , , :
 Macroscopic Modeling, Simulation, and Optimization
 DOI: 10.1007/978-3-031-78350-0_14
- , , , :
 A two-step variational approach towards the modeling of high-frequency thermo-magneto-mechanical response of magnetic shape memory alloys
 In: Journal of the Mechanics and Physics of Solids 204 (2025), Art.Nr.: 106272
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2025.106272
- , , :
 A gradient-enhanced approach for stable finite element approximations of reaction-convection-diffusion problems
 In: Journal of Theoretical, Computational and Applied Mechanics (2025), Art.Nr.: 15788
 DOI: 10.46298/jtcam.15788
- , , , :
 Convex neural networks learn generalized standard material models
 In: Journal of the Mechanics and Physics of Solids 200 (2025), Art.Nr.: 106103
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2025.106103
- , , , , , , , , , :
 Application of stress-state-dependent ductile damage and failure model to clinch joining for a wide range of tool and material combinations
 In: Journal of Advanced Joining Processes 11 (2025), Art.Nr.: 100299
 ISSN: 2666-3309
 DOI: 10.1016/j.jajp.2025.100299
- , , :
 Modelling of stress-state-dependent ductile damage with gradient-enhancement exemplified for clinch joining
 In: Journal of the Mechanics and Physics of Solids 196 (2025), Art.Nr.: 106026
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2025.106026
- , , :
 A Geometrically Nonlinear Correspondence Model for Continuum-Kinematics-Inspired Peridynamics
 In: Journal of Peridynamics and Nonlocal Modeling 7 (2025), Art.Nr.: 6
 ISSN: 2522-896X
 DOI: 10.1007/s42102-025-00129-3
- , , , :
 On a canonical interface model with application to micro-heterogeneous elastic solids
 In: Computer Methods in Applied Mechanics and Engineering 440 (2025), Art.Nr.: 117925
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2025.117925
- , , , , , , :
 Microstructural buckling in soft visco-hyperelastic laminates
 In: International Journal of Solids and Structures 311 (2025), Art.Nr.: 113242
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2025.113242
- , , , , , :
 Biaxial characterization of soft elastomers: Experiments and data-adaptive configurational forces for fracture
 In: Journal of the Mechanics and Physics of Solids 205 (2025), S. 106339
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2025.106339
- , , , , :
 Mechanical characteristics of spinal cord tissue by indentation
 In: Journal of the Mechanical Behavior of Biomedical Materials 163 (2025), Art.Nr.: 106863
 ISSN: 1751-6161
 DOI: 10.1016/j.jmbbm.2024.106863
- , , , , , , , , , , , , , , , , , , , , , , , , , , , , , :
 Computational fluid dynamics challenge on indoor dispersion of pathogen-laden aerosols
 In: Physics of Fluids 37 (2025), Art.Nr.: 025226
 ISSN: 1070-6631
 DOI: 10.1063/5.0252665
- , , , :
 A cellular-meso-macro three-scale approach captures remodelling of cancellous bone in health and disease
 In: Biomechanics and Modeling in Mechanobiology (2025), Art.Nr.: 116125
 ISSN: 1617-7959
 DOI: 10.1007/s10237-025-01948-5
- , , :
 Overview of eXtended IsoGeometrical FEM for non-deterministic problems
 In: Computational Mechanics (2025)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-025-02700-7
- , , :
 A novel energy-fitted hexagonal quadrature scheme enables low-cost and high-fidelity peridynamic computations
 In: Computer Methods in Applied Mechanics and Engineering 440 (2025), Art.Nr.: 117918
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2025.117918
- , , , :
 Modelling the flexoelectric effect in human bone—A micromorphic approach
 In: Computer Methods in Applied Mechanics and Engineering 446 (2025), Art.Nr.: 118234
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2025.118234
- , , , :
 Experimental insights into the thermo-mechanical fracture performance of soft shape memory polymers
 In: Engineering Fracture Mechanics 327 (2025), S. 111439
 ISSN: 0013-7944
 DOI: 10.1016/j.engfracmech.2025.111439
- , , , :
 Ellipsoidal soft micro-particles suspended in dilute viscous flow
 In: Computer Methods in Applied Mechanics and Engineering 441 (2025), Art.Nr.: 117973
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2025.117973
- , , , , , :
 Mass distribution impacts on particle translation and orientation dynamics in dilute flows
 In: Powder Technology 452 (2025), Art.Nr.: 120424
 ISSN: 0032-5910
 DOI: 10.1016/j.powtec.2024.120424
- , , , , , :
 A continuum model for novel electromechanical-instability-free dielectric elastomers
 In: Journal of the Mechanics and Physics of Solids 196 (2025), Art.Nr.: 105994
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2024.105994
- , , , , , :
 Mesoscopic Modeling and Simulation of Properties of Additively Manufactured Metallic Parts
 In: Dietmar Drummer, Michael Schmidt (Hrsg.): Progress in Powder Based Additive Manufacturing, Springer Nature, 2025, S. 309-330 (Springer Tracts in Additive Manufacturing, Bd.Part F386)
 DOI: 10.1007/978-3-031-78350-0_15
- , , , , :
 Statistical theory for polymer elasticity: From molecular kinematics to continuum behavior
 In: Physical Review E 112 (2025), S. 025404-
 ISSN: 1063-651X
 DOI: 10.1103/9qpw-mv57
- , , , :
 On mesh refinement procedures for polygonal virtual elements
 In: Applications in Engineering Science 22 (2025), Art.Nr.: 100222
 ISSN: 2666-4968
 DOI: 10.1016/j.apples.2025.100222
- , , , :
 Quasi-optimal mesh generation for the virtual element method: A fully adaptive remeshing procedure
 In: Computer Methods in Applied Mechanics and Engineering 435 (2025), Art.Nr.: 117630
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2024.117630
2024
- , , , , :
 An efficient procedure for concrete fracture analysis based on mesh refinement ergodicity
 In: Computational Mechanics (2024)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-024-02509-w
- , , , :
 Mean zero artificial diffusion for stable finite element approximation of convection in cellular aggregate formation
 In: Computer Methods in Applied Mechanics and Engineering 419 (2024), S. 116649
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2023.116649
- , , , , , , :
 Material Parameter Identification for a Stress-State-Dependent Ductile Damage and Failure Model Applied to Clinch Joining
 In: Journal of Manufacturing and Materials Processing 8 (2024), Art.Nr.: 157
 ISSN: 2504-4494
 DOI: 10.3390/jmmp8040157
- , , , , , , , , :
 Model-driven exploration of poro-viscoelasticity in human brain tissue: be careful with the parameters!
 In: Interface Focus 14 (2024)
 ISSN: 2042-8901
 DOI: 10.1098/rsfs.2024.0026
- , , :
 Nonlocal interfaces accounting for progressive damage within continuum-kinematics-inspired peridynamics
 In: International Journal of Solids and Structures 290 (2024), Art.Nr.: 112641
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2023.112641
- , , :
 Nonlocal interfaces accounting for progressive damage within continuum-kinematics-inspired peridynamics
 In: International Journal of Solids and Structures 290 (2024), S. 1-21
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2023.112641
- , , , , , , , :
 Computational instability analysis of inflated hyperelastic thin shells using subdivision surfaces
 In: Computational Mechanics 73 (2024), S. 257-276
 ISSN: 0178-7675
 DOI: 10.1007/s00466-023-02366-z
- , , , , , :
 Experimental and numerical investigation of the photo-mechanical response of azobenzene filled soft elastomers, Part I: Experimental investigations
 In: Extreme Mechanics Letters (2024), S. 102182
 ISSN: 2352-4316
 DOI: 10.1016/j.eml.2024.102182
- , , :
 Electro-mechanical actuation modulates fracture performance of soft dielectric elastomers
 In: International Journal of Engineering Science 195 (2024), Art.Nr.: 104008
 ISSN: 0020-7225
 DOI: 10.1016/j.ijengsci.2023.104008
- , :
 Configurational force method enables fracture assessment in soft materials
 In: Journal of the Mechanics and Physics of Solids 186 (2024), S. 105602
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2024.105602
- , :
 Crosslinking degree variations enable programming and controlling soft fracture via sideways cracking
 In: npj Computational Materials 10 (2024), Art.Nr.: 282
 ISSN: 2057-3960
 DOI: 10.1038/s41524-024-01489-y
- , , , , :
 Revealing the percolation–agglomeration transition in polymer nanocomposites via MD-informed continuum RVEs with elastoplastic interphases
 In: Composites Part B-Engineering 281 (2024), Art.Nr.: 111477
 ISSN: 1359-8368
 DOI: 10.1016/j.compositesb.2024.111477
- , , , :
 Impact of the unimodal molar mass distribution on the mechanical behavior of polymer nanocomposites below the glass transition temperature: A generic, coarse-grained molecular dynamics study
 In: European Journal of Mechanics A-Solids 107 (2024), Art.Nr.: 105379
 ISSN: 0997-7538
 DOI: 10.1016/j.euromechsol.2024.105379
- , , , , :
 Towards advanced piezoelectric metamaterial design via combined topology and shape optimization
 In: Structural and Multidisciplinary Optimization (2024)
 ISSN: 1615-147X
 DOI: 10.1007/s00158-024-03742-w
- , , , , :
 Towards advanced piezoelectric metamaterial design via combined topology and shape optimization
 In: Structural and Multidisciplinary Optimization 67 (2024), Art.Nr.: 26
 ISSN: 1615-147X
 DOI: 10.1007/s00158-024-03742-w
- , , , :
 A computational two-scale approach to cancellous bone remodelling
 In: Advanced Modeling and Simulation in Engineering Sciences 11 (2024), Art.Nr.: 13
 ISSN: 2213-7467
 DOI: 10.1186/s40323-024-00267-1
- , , , , :
 Evaluating the impact of filler size and filler content on the stiffness, strength, and toughness of polymer nanocomposites using coarse-grained molecular dynamics
 In: Engineering Fracture Mechanics 307 (2024), Art.Nr.: 110270
 ISSN: 0013-7944
 DOI: 10.1016/j.engfracmech.2024.110270
- , , , :
 A novel pseudo-rigid body approach to the non-linear dynamics of soft micro-particles in dilute viscous flow
 In: Journal of Computational Physics 519 (2024), Art.Nr.: 113377
 ISSN: 0021-9991
 DOI: 10.1016/j.jcp.2024.113377
- , , , :
 Coefficient of tangential restitution for non-spherical particles
 In: Powder Technology 437 (2024), Art.Nr.: 119526
 ISSN: 0032-5910
 DOI: 10.1016/j.powtec.2024.119526
- , , :
 Versatile data-adaptive hyperelastic energy functions for soft materials
 In: Computer Methods in Applied Mechanics and Engineering 430 (2024), S. 117208
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2024.117208
- , , , , :
 Investigating fracture mechanisms in glassy polymers using coupled particle-continuum simulations
 In: Journal of the Mechanics and Physics of Solids 193 (2024), Art.Nr.: 105884
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2024.105884
- , , :
 Modeling steady state rate- and temperature-dependent strain hardening behavior of glassy polymers
 In: Mechanics of Materials 195 (2024), Art.Nr.: 105044
 ISSN: 0167-6636
 DOI: 10.1016/j.mechmat.2024.105044
- , , , :
 Time–temperature correlations of amorphous thermoplastics at large strains based on molecular dynamics simulations
 In: Mechanics of Materials 190 (2024), S. 104926
 ISSN: 0167-6636
 DOI: 10.1016/j.mechmat.2024.104926
- , , , :
 On adaptive mesh coarsening procedures for the virtual element method for two-dimensional elastic problems
 In: Computer Methods in Applied Mechanics and Engineering 418 (2024), Art.Nr.: 116507
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2023.116507
2023
- , , , , , , :
 Numerical analysis of failure modeling in clinching process chain simulation
 20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
 In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023
 DOI: 10.21741/9781644902417-33
- , , , , , , :
 A calibration method for failure modeling in clinching process simulations
 20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
 In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023
 DOI: 10.21741/9781644902417-34
- , , :
 On the influence of free space in topology optimization of electro-active polymers
 In: Structural and Multidisciplinary Optimization 66 (2023), Art.Nr.: 187
 ISSN: 1615-147X
 DOI: 10.1007/s00158-023-03634-5
- , , :
 A versatile implicit computational framework for continuum-kinematics-inspired peridynamics
 In: Computational Mechanics (2023)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-023-02415-7
- , , , , , , , :
 Automated discovery of interpretable hyperelastic material models for human brain tissue with EUCLID
 In: Journal of the Mechanics and Physics of Solids 180 (2023), Art.Nr.: 105404
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2023.105404
- , , , , , , :
 Influence of plastic orthotropy on clinching of sheet metal
 20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
 In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023
 DOI: 10.21741/9781644902417-17
- , , :
 Efficient gradient enhancements for plasticity with ductile damage in the logarithmic strain space
 In: European Journal of Mechanics A-Solids 99 (2023), Art.Nr.: 104946
 ISSN: 0997-7538
 DOI: 10.1016/j.euromechsol.2023.104946
- , , :
 An implicitly coupled finite element-electronic circuit simulator method for efficient system simulations of piezoelectric energy harvesters
 In: Journal of Intelligent Material Systems and Structures (2023)
 ISSN: 1045-389X
 DOI: 10.1177/1045389X231157359
- , , :
 Numerical Optimization of a Nonlinear Nonideal Piezoelectric Energy Harvester Using Deep Learning
 In: Journal of Low Power Electronics and Applications 13 (2023), Art.Nr.: 8
 ISSN: 2079-9268
 DOI: 10.3390/jlpea13010008
- , , , , , :
 Buckling optimization of additively manufactured cellular structures using numerical homogenization based on beam models
 In: Archive of Applied Mechanics (2023)
 ISSN: 0939-1533
 DOI: 10.1007/s00419-023-02503-3
- , , , , , , , , :
 Poro-viscoelastic material parameter identification of brain tissue-mimicking hydrogels
 In: Frontiers in Bioengineering and Biotechnology 11 (2023), Art.Nr.: 1143304
 ISSN: 2296-4185
 DOI: 10.3389/fbioe.2023.1143304
- , :
 A numerical study on the visco-plastic regularization of a rate-independent strain gradient crystal plasticity formulation
 In: Computational Mechanics (2023)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-023-02420-w
- , , :
 Peridynamic modeling of nonlocal degrading interfaces in composites
 In: Forces in Mechanics 10 (2023)
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2022.100124
- , , , , , , , , :
 Multifield finite strain plasticity: Theory and numerics
 In: Computer Methods in Applied Mechanics and Engineering 414 (2023), Art.Nr.: 116101
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2023.116101
- , , , , , , , , , , :
 Additive manufacturing of cellular structures: Multiscale simulation and optimization
 In: Journal of Manufacturing Processes 95 (2023), S. 275-290
 ISSN: 1526-6125
 DOI: 10.1016/j.jmapro.2023.03.071
- , , , :
 Hard magnetics in ultra-soft magnetorheological elastomers enhance fracture toughness and delay crack propagation
 In: Journal of the Mechanics and Physics of Solids 173 (2023), Art.Nr.: 105232
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2023.105232
- , , , , , , , , , , :
 Geometrical Influence on Material Properties for Ti6Al4V Parts in Powder Bed Fusion
 In: Journal of Manufacturing and Materials Processing 7 (2023), S. 82
 ISSN: 2504-4494
 DOI: 10.3390/jmmp7030082
- , , , , , :
 Study on Electric Motor Vibration Suppression by Active Dynamic Vibration Absorber
 2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023 (San Francisco, CA, USA, 15. Mai 2023 - 18. Mai 2023)
 In: 2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023 2023
 DOI: 10.1109/IEMDC55163.2023.10238866
- , , :
 A unifying finite strain modeling framework for anisotropic mixed-mode fracture in soft materials
 In: Computational Mechanics (2023)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-023-02359-y
- , , , , :
 Characterization of the material behavior and identification of effective elastic moduli based on molecular dynamics simulations of coarse-grained silica
 In: Mathematics and Mechanics of Solids 28 (2023)
 ISSN: 1081-2865
 DOI: 10.1177/10812865221108099
- , , , :
 Extending a generic and fast coarse-grained molecular dynamics model to examine the mechanical behavior of grafted polymer nanocomposites
 In: Forces in Mechanics 12 (2023), Art.Nr.: 100207
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2023.100207
- , , :
 A generalized anisotropic damage interface model for finite strains
 In: Journal of the Mechanics and Physics of Solids 174 (2023), Art.Nr.: 105255
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2023.105255
- , , , :
 A novel micromorphic approach captures non-locality in continuum bone remodelling
 In: Computer Methods in Biomechanics and Biomedical Engineering (2023)
 ISSN: 1025-5842
 DOI: 10.1080/10255842.2023.2223331
- , , , , :
 Shape matters: Lagrangian tracking of complex nonspherical microparticles in superellipsoidal approximation
 In: International Journal of Multiphase Flow 158 (2023), Art.Nr.: 104283
 ISSN: 0301-9322
 DOI: 10.1016/j.ijmultiphaseflow.2022.104283
- , , , , :
 A novel particle–particle and particle–wall collision model for superellipsoidal particles
 In: Computational Particle Mechanics (2023)
 ISSN: 2196-4378
 DOI: 10.1007/s40571-023-00618-6
- , , :
 Discrete data-adaptive approximation of hyperelastic energy functions
 In: Computer Methods in Applied Mechanics and Engineering 416 (2023), Art.Nr.: 116366
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2023.116366
- , , :
 Multifield computational model for human brain development: Explicit numerical stabilization
 In: Proceedings in Applied Mathematics and Mechanics (2023)
 ISSN: 1617-7061
 DOI: 10.1002/pamm.202300288
- , , , , :
 A general continuum damage model for soft composites
 In: Journal of the Mechanics and Physics of Solids 175 (2023), Art.Nr.: 105290
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2023.105290
- , , , , :
 A new micro–macro transition for hyperelastic materials
 In: Journal of the Mechanics and Physics of Solids 171 (2023), Art.Nr.: 105156
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2022.105156
2022
- , , :
 Thermo-mechanical simulations of powder bed fusion processes: accuracy and efficiency
 In: Advanced Modeling and Simulation in Engineering Sciences 9 (2022), Art.Nr.: 18
 ISSN: 2213-7467
 DOI: 10.1186/s40323-022-00230-y
- , , :
 Node Based Non-invasive Form Finding Revisited-The Challenge of Remeshing
 Springer International Publishing, 2022
 ISBN: 9783030873127
 DOI: 10.1007/978-3-030-87312-7_9
- , , , , , :
 A variational integrator for the Discrete Element Method
 In: Journal of Computational Physics 462 (2022), Art.Nr.: 111253
 ISSN: 0021-9991
 DOI: 10.1016/j.jcp.2022.111253
- , , :
 Sequential topology and shape optimization framework to design compliant mechanisms with boundary stress constraints
 In: Structural and Multidisciplinary Optimization 65 (2022)
 ISSN: 1615-147X
 DOI: 10.1007/s00158-022-03271-4
- , , :
 Relationships between the material parameters of continuum-kinematics-inspired peridynamics and isotropic linear elasticity for two-dimensional problems
 In: International Journal of Solids and Structures 238 (2022), Art.Nr.: 111366
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2021.111366
- , , , :
 Extended general interfaces: Mori–Tanaka homogenization and average fields
 In: International Journal of Solids and Structures 254-255 (2022), Art.Nr.: 111933
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2022.111933
- , , , , :
 On continuum modeling of cell aggregation phenomena
 In: Journal of the Mechanics and Physics of Solids 167 (2022), Art.Nr.: 105004
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2022.105004
- , , :
 Influence of Kinematic Hardening on Clinch Joining of Dual-Phase Steel HCT590X Sheet Metal
 12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2022 (Toronto, ON, CAN, 10. Juli 2022 - 14. Juli 2022)
 In: Kaan Inal, Michael Worswick, Cliff Butcher, Julie Levesque (Hrsg.): Minerals, Metals and Materials Series 2022
 DOI: 10.1007/978-3-031-06212-4_31
- , , :
 Observations on additive plasticity in the logarithmic strain space at excessive strains
 In: International Journal of Solids and Structures 239 (2022)
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2021.111416
- , , :
 Investigation of a nonlinear piezoelectric energy harvester with advanced electric circuits with the finite element method
 In: SN Applied Sciences 4 (2022), Art.Nr.: 120
 ISSN: 2523-3963
 DOI: 10.1007/s42452-022-05003-1
- , , :
 Two-scale off-and online approaches to geometrically exact elastoplastic rods
 In: Computational Mechanics (2022)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-022-02204-8
- , , , , , :
 A hybrid analytical–numerical model for calculating the maximum elastic force acting on a flow-driven elastic prolate spheroidal particle during its collision with a rigid wall
 In: Computational Mechanics (2022)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-021-02127-w
- , , , , :
 Computational Fracture Modeling in Heterogeneous Materials - Recent Advances and Future Challenges
 conference, WCCM-APCOM 15th World Congress on Computational Mechanics & 8th Asian Pacific Congress on Computational Mechanics (Yokohama (online), 31. Juli 2022 - 5. August 2022)
- , , :
 A graded interphase enhanced phase-field approach for modeling fracture in polymer composites
 In: Forces in Mechanics 9 (2022), Art.Nr.: 100135
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2022.100135
- , , :
 LEFM is agnostic to geometrical nonlinearities arising at atomistic crack tips
 In: Forces in Mechanics 9 (2022), S. 100127
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2022.100127
- , , :
 A nonlocal interface approach to peridynamics exemplified by continuum‐kinematics‐inspired peridynamics
 In: International Journal for Numerical Methods in Engineering (2022)
 ISSN: 0029-5981
 DOI: 10.1002/nme.6975
- , , :
 Peridynamic modeling of nonlocal degrading interfaces in composites
 In: Forces in Mechanics (2022), S. 100124
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2022.100124
- , , :
 A viscoelastic Mooney-Rivlin model for adhesive curing and first steps toward its calibration based on photoelasticity measurements
 In: Archive of Applied Mechanics (2022)
 ISSN: 0939-1533
 DOI: 10.1007/s00419-022-02273-4
- , , , , , :
 Vibration analysis of piezoelectric Kirchhoff–Love shells based on Catmull–Clark subdivision surfaces
 In: International Journal for Numerical Methods in Engineering (2022)
 ISSN: 0029-5981
 DOI: 10.1002/nme.7010
- , , , , :
 Experimental and numerical investigation of the electro-mechanical response of particle filled elastomers - Part I: Experimental investigations
 In: European Journal of Mechanics A-Solids 96 (2022), Art.Nr.: 104651
 ISSN: 0997-7538
 DOI: 10.1016/j.euromechsol.2022.104651
- , , , , :
 Experimental and numerical investigations of the electro-mechanical response of particle filled elastomers—Part II: Continuum modeling approach
 In: European Journal of Mechanics A-Solids 96 (2022), Art.Nr.: 104661
 ISSN: 0997-7538
 DOI: 10.1016/j.euromechsol.2022.104661
- , , :
 Numerical modeling of nonlinear photoelasticity
 In: International Journal for Numerical Methods in Engineering (2022)
 ISSN: 0029-5981
 DOI: 10.1002/nme.7177
- , , , :
 Hybrid magnetorheological elastomers enable versatile soft actuators
 In: npj Computational Materials 8 (2022), Art.Nr.: 162
 ISSN: 2057-3960
 DOI: 10.1038/s41524-022-00844-1
- , , , , :
 STOKES FLOW INDUCED DRAG AND TORQUE ON ASBESTOS-LIKE FIBRES CANNOT BE ESTIMATED BY A SIMPLISTIC ELLIPSOIDAL APPROXIMATION
 45th International Conference on Boundary Elements and other Mesh Reduction Methods, BEM/MRM 2022 (Online, 24. Mai 2022 - 26. Mai 2022)
 In: Alexander H.-D. Cheng (Hrsg.): WIT Transactions on Engineering Sciences 2022
 DOI: 10.2495/BE450031
- , , , , :
 Characterization of the material behavior and identification of effective elastic moduli based on molecular dynamics simulations of coarse-grained silica
 In: Mathematics and Mechanics of Solids (2022)
 ISSN: 1081-2865
 DOI: 10.1177/10812865221108099
- , , , :
 Applying a generic and fast coarse-grained molecular dynamics model to extensively study the mechanical behavior of polymer nanocomposites
 In: eXPRESS Polymer Letters 16 (2022), S. 1304-1321
 ISSN: 1788-618X
 DOI: 10.3144/expresspolymlett.2022.94
- , , , , :
 A quantitative interphase model for polymer nanocomposites: Verification, validation, and consequences regarding size effects
 In: Composites Part A-Applied Science and Manufacturing 161 (2022), Art.Nr.: 107094
 ISSN: 1359-835X
 DOI: 10.1016/j.compositesa.2022.107094
- , , , :
 An energetically consistent surface correction method for bond-based peridynamics
 In: Forces in Mechanics 9 (2022), Art.Nr.: 100132
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2022.100132
- , , , , :
 A peridynamic formulation for nonlocal bone remodelling
 In: Computer Methods in Biomechanics and Biomedical Engineering (2022)
 ISSN: 1025-5842
 DOI: 10.1080/10255842.2022.2039641
- , , :
 Open system peridynamics
 In: Continuum Mechanics and Thermodynamics (2022)
 ISSN: 0935-1175
 DOI: 10.1007/s00161-022-01105-8
- , , , , , :
 Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung
 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik (Online-Tagung, 15. Februar 2022 - 16. Februar 2022)
 (Conference report)
- , , , , , , , :
 Testing, modelling, and parameter identification for adhesively bonded joints under the influence of temperature
 In: Journal of Adhesion Science and Technology (2022), S. 1-32
 ISSN: 0169-4243
 DOI: 10.1080/01694243.2022.2125714
- , , , :
 Generalized interfaces enabling macroscopic modeling of structural adhesives and their failure
 In: Forces in Mechanics 9 (2022), Art.Nr.: 100137
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2022.100137
- , , , , , :
 Fractional and fractal order effects in soft elastomers: Strain rate and temperature dependent nonlinear mechanics
 In: Mechanics of Materials 172 (2022), Art.Nr.: 104390
 ISSN: 0167-6636
 DOI: 10.1016/j.mechmat.2022.104390
- , , :
 Geometrically nonlinear design of compliant mechanisms: Topology and shape optimization with stress and curvature constraints
 In: Computer Methods in Applied Mechanics and Engineering 397 (2022)
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2022.115161
- :
 Consequences of Thermodynamical Balances
 In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, S. 329-359 (Solid Mechanics and its Applications, Bd.272)
 DOI: 10.1007/978-3-030-89070-4_12
- :
 Kinematical ‘Balances’*
 In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, S. 127-155 (Solid Mechanics and its Applications, Bd.272)
 DOI: 10.1007/978-3-030-89070-4_6
- :
 Kinematics at Singular Sets
 In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, S. 61-86 (Solid Mechanics and its Applications, Bd.272)
 DOI: 10.1007/978-3-030-89070-4_4
- :
 Kinematics in Bulk Volumes
 In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, S. 19-36 (Solid Mechanics and its Applications, Bd.272)
 DOI: 10.1007/978-3-030-89070-4_2
- :
 Kinematics on Dimensionally Reduced Smooth Manifolds
 In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, S. 37-60 (Solid Mechanics and its Applications, Bd.272)
 DOI: 10.1007/978-3-030-89070-4_3
- :
 Mechanical Balances
 In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, S. 157-188 (Solid Mechanics and its Applications, Bd.272)
 DOI: 10.1007/978-3-030-89070-4_7
- :
 Variational Setting
 In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, S. 265-297 (Solid Mechanics and its Applications, Bd.272)
 DOI: 10.1007/978-3-030-89070-4_10
- :
 Virtual Work
 In: Spatial and Material Forces in Nonlinear Continuum Mechanics, Springer Science and Business Media B.V., 2022, S. 231-263 (Solid Mechanics and its Applications, Bd.272)
 DOI: 10.1007/978-3-030-89070-4_9
- , , , , , , :
 A p-adaptive, implicit-explicit mixed finite element method for diffusion-reaction problems
 In: International Journal for Numerical Methods in Engineering (2022)
 ISSN: 0029-5981
 DOI: 10.1002/nme.6967
- , , :
 Modeling the dynamic magneto-mechanical response of magnetic shape memory alloys based on Hamilton's principle: The governing equation system
 In: Journal of the Mechanics and Physics of Solids 160 (2022), Art.Nr.: 104761
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2021.104761
- , , , , :
 Correction to: Risk Assessment of Infection by Airborne Droplets and Aerosols at Different Levels of Cardiovascular Activity (Archives of Computational Methods in Engineering, (2021), 28, 6, (4297-4316), 10.1007/s11831-021-09613-7)
 In: Archives of Computational Methods in Engineering 29 (2022), S. 735-
 ISSN: 1134-3060
 DOI: 10.1007/s11831-021-09680-w
- , , , , , :
 Anatomy matters: The role of the subject-specific respiratory tract on aerosol deposition — A CFD study
 In: Computer Methods in Applied Mechanics and Engineering (2022), Art.Nr.: 115372
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2022.115372
- , , , , :
 A specific slip length model for the Maxwell slip boundary conditions in the Navier–Stokes solution of flow around a microparticle in the no-slip and slip flow regimes
 In: Theoretical and Computational Fluid Dynamics (2022)
 ISSN: 0935-4964
 DOI: 10.1007/s00162-022-00627-w
- , , , :
 Thermomechanical coupling in glassy polymers: An effective temperature theory
 In: International Journal of Plasticity 156 (2022)
 ISSN: 0749-6419
 DOI: 10.1016/j.ijplas.2022.103361
- , , , :
 On mesh refinement procedures for the virtual element method for two-dimensional elastic problems
 In: Computer Methods in Applied Mechanics and Engineering 393 (2022), Art.Nr.: 114849
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2022.114849
- , , , , :
 A Model for Translation and Rotation Resistance Tensors for Superellipsoidal Particles in Stokes Flow
 In: Journal of Marine Science and Engineering 10 (2022), Art.Nr.: 369
 ISSN: 2077-1312
 DOI: 10.3390/jmse10030369
- , , , , :
 NUMERICAL DRAG AND LIFT PREDICTION FRAMEWORK FOR SUPERELLIPSOIDAL PARTICLES IN MULTIPHASE FLOWS
 In: International Journal of Computational Methods and Experimental Measurements 10 (2022), S. 38-49
 ISSN: 2046-0546
 DOI: 10.2495/CMEM-V10-N1-38-49
2021
- , , , :
 Atomistic configurational forces in crystalline fracture
 In: Forces in Mechanics 4 (2021), S. 100044
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2021.100044
- , , :
 Configurational Forces in Bond Order Potentials
 In: Proceedings in Applied Mathematics and Mechanics 21 (2021)
 ISSN: 1617-7061
 DOI: 10.1002/pamm.202100160
- , , :
 Phonon-based thermal configurational forces: Definitions and applications in rupture of semiconductors
 In: Engineering Fracture Mechanics 257 (2021), Art.Nr.: 108014
 ISSN: 0013-7944
 DOI: 10.1016/j.engfracmech.2021.108014
- , :
 Discrete configurational mechanics for the computational study of atomistic fracture mechanics
 In: Forces in Mechanics 2 (2021), S. 100009
 ISSN: 2666-3597
 DOI: 10.1016/j.finmec.2020.100009
- , , :
 Homogenization of Composites With Extended General Interfaces: Comprehensive Review and Unified Modeling
 In: Applied Mechanics Reviews 73 (2021)
 ISSN: 0003-6900
 DOI: 10.1115/1.4051481
- , , , , :
 Towards an holistic account on residual stresses in full-forward extruded rods: Experiment, modeling and simulation of forming and operation phases
 In: Archive of Applied Mechanics (2021)
 ISSN: 0939-1533
 DOI: 10.1007/s00419-021-01917-1
- , , :
 A finite plasticity gradient-damage model for sheet metals during forming and clinching
 19th International Conference on Sheet Metal, SheMet 2021 (Virtual, Online, 29. März 2021 - 31. März 2021)
 In: Key Engineering Materials 2021
 DOI: 10.4028/www.scientific.net/KEM.883.57
- , , , , :
 Inverse parameter identification of an anisotropic plasticity model for sheet metal
 40th International Deep-Drawing Research Group Conference (IDDRG) (, ELECTR NETWORK)
 In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
 DOI: 10.1088/1757-899X/1157/1/012004
- , , , , , , :
 Poro-Viscoelastic Effects During Biomechanical Testing of Human Brain Tissue
 In: Frontiers in Mechanical Engineering 7 (2021), Art.Nr.: 708350
 ISSN: 2297-3079
 DOI: 10.3389/fmech.2021.708350
- , , :
 Nonlinear finite element system simulation of piezoelectric vibration-based energy harvesters
 In: Journal of Intelligent Material Systems and Structures (2021)
 ISSN: 1045-389X
 DOI: 10.1177/1045389X211048222
- , , :
 Geometrically exact elastoplastic rods: determination of yield surface in terms of stress resultants
 In: Computational Mechanics (2021)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-020-01957-4
- , :
 Homogenization of fully nonlinear rod lattice structures: on the size of the RVE and micro structural instabilities
 In: Computational Mechanics (2021)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-021-02123-0
- , , , :
 Continuum-kinematics-inspired peridynamics: Thermo-mechanical problems
 In: Continuum Mechanics and Thermodynamics (2021)
 ISSN: 0935-1175
 DOI: 10.1007/s00161-021-01000-8
- , , :
 A geometrically exact formulation of peridynamics
 In: Theoretical and Applied Fracture Mechanics 111 (2021), Art.Nr.: 102850
 ISSN: 0167-8442
 DOI: 10.1016/j.tafmec.2020.102850
- , , :
 Kinematically exact peridynamics
 Elsevier, 2021
 ISBN: 9780128200698
 DOI: 10.1016/B978-0-12-820069-8.00016-0
- , , , :
 Component residual stress control in forward rod extrusion by material flow and tribology—experiments and modeling
 In: Forschung Im Ingenieurwesen-Engineering Research (2021)
 ISSN: 0015-7899
 DOI: 10.1007/s10010-021-00509-3
- , , , , , :
 A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials
 In: Journal of Materials Engineering and Performance (2021)
 ISSN: 1059-9495
 DOI: 10.1007/s11665-021-05725-0
- , , :
 Enhanced computational homogenization techniques for modelling size effects in polymer composites
 In: Computational Mechanics (2021)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-021-02037-x
- , , , , :
 Variationally consistent computational homogenization of chemomechanical problems with stabilized weakly periodic boundary conditions
 In: International Journal for Numerical Methods in Engineering (2021)
 ISSN: 0029-5981
 DOI: 10.1002/nme.6798
- , , :
 Nonlocal wrinkling instabilities in bilayered systems using peridynamics
 In: Computational Mechanics (2021)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-021-02057-7
- , , , , , , , , :
 Spatiotemporal modeling of first and second wave outbreak dynamics of COVID‐19 in Germany
 In: Biomechanics and Modeling in Mechanobiology (2021)
 ISSN: 1617-7959
 DOI: 10.1007/s10237-021-01520-x
- , , , , :
 Coupled electro-elastic deformation and instabilities of a toroidal membrane
 In: Journal of the Mechanics and Physics of Solids 151 (2021)
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2020.104221
- , , :
 A complete thermo-electro-viscoelastic characterization of dielectric elastomers, Part I: Experimental investigations
 In: Journal of the Mechanics and Physics of Solids (2021), S. 104603
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2021.104603
- , , :
 A complete thermo-electro-viscoelastic characterization of dielectric elastomers, Part II: Continuum modeling approach
 In: Journal of the Mechanics and Physics of Solids 157 (2021), S. 104625
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2021.104625
- , , :
 A geometrically exact continuum framework for light-matter interaction in photo-active polymers I. Variational setting
 In: International Journal of Solids and Structures 226-227 (2021), Art.Nr.: 111073
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2021.111073
- , , , :
 Stochastic local FEM for computational homogenization of heterogeneous materials exhibiting large plastic deformations
 In: Computational Mechanics (2021)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-021-02099-x
- , , :
 A thermodynamically consistent theory of stress-gradient plasticity
 In: Journal of the Mechanics and Physics of Solids 147 (2021), S. 104266
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2020.104266
- , , , :
 Revised Boundary Conditions for FE-MD Multiscale Coupling of Amorphous Polymers
 VIII Conference on Mechanical Response of Composites (Online, 22. September 2021 - 24. September 2021)
 DOI: 10.23967/composites.2021.014
 URL: https://www.scipedia.com/public/Ries_et_al_2021c
- , , , :
 A coupled MD-FE methodology to characterize mechanical interphases in polymeric nanocomposites
 In: International Journal of Mechanical Sciences (2021), S. 106564
 ISSN: 0020-7403
 DOI: 10.1016/j.ijmecsci.2021.106564
- , , :
 The Hybrid Capriccio Method: A 1D Study for Further Advancement
 14th World Congress on Computational Mechanics (WCCM) (, 11. Januar 2021 - 11. Januar 2021)
 In: F. Chinesta, R. Abgrall, O. Allix, M. Kaliske (Hrsg.): Multiscale and Multiphysics Systems, 2021 2021
 DOI: 10.23967/wccm-eccomas.2020.335
- , , , , :
 Multiscale FE-MD Coupling: Influence of the Chain Length on the Mechanical Behavior of Coarse-Grained Polystyrene
 14th World Congress on Computational Mechanics (WCCM) (, 11. Januar 2021 - 15. Januar 2021)
 In: F. Chinesta, R. Abgrall, O. Allix and M. Kaliske (Hrsg.): Multiscale and Multiphysics Systems, 2021 2021
 DOI: 10.23967/wccm-eccomas.2020.214
- , , , :
 Generalized interfaces via weighted averages for application to graded interphases at large deformations
 In: Journal of the Mechanics and Physics of Solids (2021), Art.Nr.: 104234
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2020.104234
- , , , , :
 Bone fracture healing within a continuum bone remodelling framework
 In: Computer Methods in Biomechanics and Biomedical Engineering (2021)
 ISSN: 1025-5842
 DOI: 10.1080/10255842.2021.1998465
- , , :
 Concurrent consideration of cortical and cancellous bone within continuum bone remodelling
 In: Computer Methods in Biomechanics and Biomedical Engineering (2021)
 ISSN: 1025-5842
 DOI: 10.1080/10255842.2021.1880573
- , , :
 A finite element formulation for a direct approach to elastoplasticity in special Cosserat rods
 In: International Journal for Numerical Methods in Engineering (2021)
 ISSN: 0029-5981
 DOI: 10.1002/nme.6566
- , , :
 Modeling crystallization kinetics for selective laser sintering of polyamide 12
 In: GAMM-Mitteilungen (2021)
 ISSN: 0936-7195
 DOI: 10.1002/gamm.202100011
- , , :
 Coupled topology and shape optimization using an embedding domain discretization method
 In: Structural and Multidisciplinary Optimization (2021)
 ISSN: 1615-147X
 DOI: 10.1007/s00158-021-03024-9
- , :
 The Catalogue of Computational Material Models: Basic Geometrically Linear Models in 1D
 Springer International Publishing, 2021
 ISBN: 9783030636845
 DOI: 10.1007/978-3-030-63684-5
- , , , , , :
 Atomistic two-, three- and four-body potentials. Spatial and material settings
 In: Journal of the Mechanics and Physics of Solids 154 (2021), Art.Nr.: 104507
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2021.104507
- , , , , :
 Can CFD establish a connection to a milder COVID-19 disease in younger people? Aerosol deposition in lungs of different age groups based on Lagrangian particle tracking in turbulent flow
 In: Computational Mechanics (2021)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-021-01988-5
- , , , , :
 Risk Assessment of Infection by Airborne Droplets and Aerosols at Different Levels of Cardiovascular Activity
 In: Archives of Computational Methods in Engineering (2021)
 ISSN: 1134-3060
 DOI: 10.1007/s11831-021-09613-7
- , , , , :
 A two-field computational model couples cellular brain development with cortical folding
 In: Brain Multiphysics 2 (2021), S. 100025
 ISSN: 2666-5220
 DOI: 10.1016/j.brain.2021.100025
- , , , , :
 Exploring the interplay between cellular development and mechanics in the developing human brain
 In: Proceedings in Applied Mathematics and Mechanics 21 (2021), Art.Nr.: e202100104
 ISSN: 1617-7061
 DOI: 10.1002/pamm.202100104
- , , , :
 A viscoelastic-viscoplastic constitutive model for glassy polymers informed by molecular dynamics simulations
 In: International Journal of Solids and Structures (2021), S. 111071
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2021.111071
- , , :
 A particle‐continuum coupling method for multiscale simulations of viscoelastic‐viscoplastic amorphous glassy polymers
 In: International Journal for Numerical Methods in Engineering (2021)
 ISSN: 0029-5981
 DOI: 10.1002/nme.6836
2020
- , , , , :
 Fifty Shades of Brain: A Review on the Mechanical Testing and Modeling of Brain Tissue
 In: Archives of Computational Methods in Engineering 27 (2020), S. 1187–1230
 ISSN: 1134-3060
 DOI: 10.1007/s11831-019-09352-w
 URL: https://link.springer.com/article/10.1007/s11831-019-09352-w
- , , , , , , , , , , :
 Towards microstructure-informed material models for human brain tissue
 In: Acta Biomaterialia 104 (2020), S. 53-65
 ISSN: 1742-7061
 DOI: 10.1016/j.actbio.2019.12.030
 URL: https://www.sciencedirect.com/science/article/pii/S1742706119308682?via=ihub
- , , :
 Shape Optimization of a Backward Extrusion Process Using a Non-Invasive Form Finding Algorithm
 In: Procedia Manufacturing 23rd International Conference on Material Forming (2020), S. 873-880
 ISSN: 2351-9789
 DOI: 10.1016/j.promfg.2020.04.273
- , , , , :
 Modeling the porous and viscous responses of human brain tissue behavior
 In: Computer Methods in Applied Mechanics and Engineering 369 (2020), Art.Nr.: 113128
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2020.113128
 URL: https://www.sciencedirect.com/science/article/pii/S0045782520303133
- , , , :
 Towards a unified shear-induced lift model for prolate spheroidal particles moving in arbitrary non-uniform flow
 In: Computers & Fluids 196 (2020), Art.Nr.: 104323
 ISSN: 0045-7930
 DOI: 10.1016/j.compfluid.2019.104323
- , , , , :
 A matrix-free approach for finite-strain hyperelastic problems using geometric multigrid
 In: International Journal for Numerical Methods in Engineering (2020)
 ISSN: 0029-5981
 DOI: 10.1002/nme.6336
- , , , , :
 Alginate-based hydrogels show the same complex mechanical behavior as brain tissue
 In: Journal of the Mechanical Behavior of Biomedical Materials 111 (2020), Art.Nr.: 103979
 ISSN: 1751-6161
 DOI: 10.1016/j.jmbbm.2020.103979
 URL: https://www.sciencedirect.com/science/article/abs/pii/S1751616120305312
- , , , , :
 Behavior of vibration energy harvesters composed of polymer fibers and piezoelectric ceramic particles
 In: Sensors and Actuators A-Physical 303 (2020), Art.Nr.: 111699
 ISSN: 0924-4247
 DOI: 10.1016/j.sna.2019.111699
- , , , :
 The computational framework for continuum-kinematics-inspired peridynamics
 In: Computational Mechanics (2020)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-020-01885-3
- , , , , , , , :
 Memory-based meso-scale modeling of Covid-19
 In: Computational Mechanics (2020)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-020-01883-5
- , , , , :
 On thermo-viscoelastic experimental characterization and numerical modelling of VHB polymer
 In: International Journal of Non-Linear Mechanics 118 (2020), Art.Nr.: 103263
 ISSN: 0020-7462
 DOI: 10.1016/j.ijnonlinmec.2019.103263
- , , , :
 Assessment of an isogeometric approach with Catmull–Clark subdivision surfaces using the Laplace–Beltrami problems
 In: Computational Mechanics (2020)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-020-01877-3
- , , :
 Modelling the flexoelectric effect in solids: A micromorphic approach
 In: Computer Methods in Applied Mechanics and Engineering 371 (2020), Art.Nr.: 113320
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2020.113320
- , , :
 Temperature distribution and entropy generation during Darcy–Forchheimer–Brinkman electrokinetic flow in a microfluidic tube subject to a prescribed heat flux
 In: Meccanica (2020)
 ISSN: 0025-6455
 DOI: 10.1007/s11012-020-01152-y
- , , , :
 On age-dependent bone remodeling
 In: Journal of Biomechanics (2020), Art.Nr.: 109701
 ISSN: 0021-9290
 DOI: 10.1016/j.jbiomech.2020.109701
- , , :
 On biological availability dependent bone remodeling
 In: Computer Methods in Biomechanics and Biomedical Engineering (2020)
 ISSN: 1025-5842
 DOI: 10.1080/10255842.2020.1736050
- , :
 Magneto-active polymers: Fabrication, characterisation, modelling and simulation at the micro- and macro-scale
 De Gruyter, 2020
 ISBN: 9783110418576
 DOI: 10.1515/9783110418576
- , , :
 Characterization of Polystyrene Under Shear Deformation Using Molecular Dynamics
 In: Developments and Novel Approaches in Nonlinear Solid Body Mechanics, Springer, Cham, 2020, S. 219-229
 ISBN: 9783030504595
 DOI: 10.1007/978-3-030-50460-1_14
- , , , , , :
 Numerical and experimental investigation of the isothermal assumption in selective laser sintering of PA12
 In: Additive Manufacturing (2020)
 ISSN: 2214-7810
 DOI: 10.1016/j.addma.2020.101676
- , , , , :
 Grain boundary interaction based on gradient crystal inelasticity and decohesion
 In: Computational Materials Science 178 (2020), Art.Nr.: 109604
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2020.109604
- :
 ANALYTICAL MECHANICS ALLOWS NOVEL VISTAS ON MATHEMATICAL EPIDEMIC DYNAMICS MODELING
 In: Mathematics and Mechanics of Complex Systems 8 (2020), S. 321-343
 ISSN: 2326-7186
 DOI: 10.2140/memocs.2020.8.321
- , , , :
 On Optimization Strategies for Inverse Problems in Metalforming
 In: Marion Merklein, A. Erman Tekkaya, Bernd-Arno Behrens (Hrsg.): Sheet Bulk Metal Forming - Research Results of the TCRC73, Zug: Springer Nature Switzerland, 2020, S. 354-377
 DOI: 10.1007/978-3-030-61902-2_16
- , , , :
 A novel two-way coupling model for Euler-Lagrange simulations of multiphase flow
 In: Engineering Analysis With Boundary Elements 119 (2020), S. 119-132
 ISSN: 0955-7997
 DOI: 10.1016/j.enganabound.2020.07.012
- , , , , :
 FE2 simulations of magnetorheological elastomers: influence of microscopic boundary conditions, microstructures and free space on the macroscopic responses of MREs
 In: International Journal of Solids and Structures 193-194 (2020), S. 338-356
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2020.02.015
2019
- , , :
 A computational approach to obtain nonlinearly elastic constitutive relations of special Cosserat rods
 In: Computer Methods in Applied Mechanics and Engineering 350 (2019), S. 295-314
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2019.02.032
- , , , :
 Cutoff-Based Modeling of Coulomb Interactions for Atomistic-to-Continuum Multiscale Methods
 In: Multiscale Science and Engineering 1 (2019), S. 299 - 317
 ISSN: 2524-4523
 DOI: 10.1007/s42493-019-00027-z
 URL: https://link.springer.com/article/10.1007/s42493-019-00027-z
- , :
 On the emergence of out-of-plane ferroelectricity in ultrathin films
 In: Archive of Applied Mechanics 89 (2019), S. 1171-1181
 ISSN: 0939-1533
 DOI: 10.1007/s00419-019-01522-3
- , , , :
 Reduced-Order Modelling and Homogenisation in Magneto-Mechanics: A Numerical Comparison of Established Hyper-Reduction Methods
 In: Mathematical and Computational Applications 24 (2019)
 ISSN: 1300-686X
 DOI: 10.3390/mca24010020
- , , , :
 Challenges and perspectives in brain tissue testing and modeling
 In: Proceedings in Applied Mathematics and Mechanics accepted (2019)
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201900269
- , , , :
 An energetically consistent heat input model for additive manufacturing
 In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201900297
- , , , :
 Thermodynamic formulation of a unified multi-mechanism continuum viscoplastic damage model with application to high-Cr steels
 In: International Journal of Plasticity 114 (2019), S. 15-39
 ISSN: 0749-6419
 DOI: 10.1016/j.ijplas.2018.09.011
- , , , :
 Settling characteristics of nonspherical porous sludge flocs with nonhomogeneous mass distribution
 In: Water Research 158 (2019), S. 159-170
 ISSN: 0043-1354
 DOI: 10.1016/j.watres.2019.04.017
- , , , , :
 A novel model for the lift force acting on a prolate spheroidal particle in arbitrary non-uniform flow. Part II. Lift force taking into account the non-streamwise flow shear
 In: International Journal of Multiphase Flow 111 (2019), S. 232-240
 ISSN: 0301-9322
 DOI: 10.1016/j.ijmultiphaseflow.2018.12.003
- , , , , , :
 Systematic study of homogenization and the utility of circular simplified representative volume element
 In: Mathematics and Mechanics of Solids (2019)
 ISSN: 1081-2865
 DOI: 10.1177/1081286518823834
- , , :
 Continuum-kinematics-inspired peridynamics. Mechanical problems
 In: Journal of the Mechanics and Physics of Solids 131 (2019), S. 125-146
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2019.06.016
- , , :
 Gradient Enhanced Crystal Plasticity in Additive Manufacturing Identification of a Macroscopic Yield Criterion
 In: Proceedings in Applied Mathematics and Mechanics (2019)
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201900308
- , , , , :
 Investigations on residual stress generation in full-forward-extrusion
 In: Production Engineering (2019)
 ISSN: 0944-6524
 DOI: 10.1007/s11740-019-00892-5
- , , , , :
 Mechanisms of residual stress generation in full-forward-extrusion
 In: Production Engineering (2019)
 ISSN: 0944-6524
- , :
 Plastic dislocation and incompatibility density as indicators for residual stresses
 15th International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019 (Barcelona, 3. September 2019 - 5. September 2019)
 In: Eugenio Onate, D. Roger J. Owen, Djordje Peric, Michele Chiumenti, Eduardo de Souza Neto (Hrsg.): 15th International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS 2019 2019
- , , :
 Modelling the flexoelectric effect in solids
 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC) (Cape Town, 2. September 2019 - 4. September 2019)
 In: ADVANCES IN ENGINEERING MATERIALS, STRUCTURES AND SYSTEMS: INNOVATIONS, MECHANICS AND APPLICATIONS, LEIDEN: 2019
 DOI: 10.1201/9780429426506-47
- , :
 On the influence of the compliant electrodes on the mechanical behavior of VHB 4905
 In: Computational Materials Science 160 (2019), S. 287-294
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2019.01.011
- , , :
 Optimisation of the Capriccio Method to Couple Particle- and Continuum-Based Simulations of Polymers
 In: Multiscale Science and Engineering (2019)
 ISSN: 2524-4523
 DOI: 10.1007/s42493-019-00028-y
- , , , , :
 Fuzzy dynamics of multibody systems with polymorphic uncertainty in the material microstructure
 In: Computational Mechanics 64 (2019), S. 1601-1619
 ISSN: 0178-7675
 DOI: 10.1007/s00466-019-01737-9
- , , :
 Acceleration of the spectral stochastic FEM using POD and element based discrete empirical approximation for a micromechanical model of heterogeneous materials with random geometry
 In: Computer Methods in Applied Mechanics and Engineering (2019), Art.Nr.: 112689
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2019.112689
- , , :
 On spectral fuzzy–stochastic FEM for problems involving polymorphic geometrical uncertainties
 In: Computer Methods in Applied Mechanics and Engineering 350 (2019), S. 432-461
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2019.02.024
- , , , , , , , , , , , , , , , , , , , , , , , :
 Challenges of order reduction techniques for problems involving polymorphic uncertainty
 In: GAMM-Mitteilungen (2019), Art.Nr.: e201900010
 ISSN: 0936-7195
 DOI: 10.1002/gamm.201900011
- , , , , :
 On periodic boundary conditions and ergodicity in computational homogenization of heterogeneous materials with random microstructure
 In: Computer Methods in Applied Mechanics and Engineering 357 (2019)
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2019.07.032
- , , , :
 Extensive CGMD simulations of atactic PS providing pseudo experimental data to calibrate nonlinear inelastic continuum mechanical constitutive laws
 In: Polymers 11 (2019), Art.Nr.: 1824
 ISSN: 2073-4360
 DOI: 10.3390/polym11111824
- , , :
 Investigation of the Mechanical Behavior of Polystyrene using Molecular Dynamics
 In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201900015
- , , :
 Designing tunable composites with general interfaces
 In: International Journal of Solids and Structures (2019)
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2019.04.006
- , , :
 On effective behavior of microstructures embedding general interfaces with damage
 In: Computational Mechanics (2019)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-019-01727-x
- , , , :
 A thermoelastoplastic theory for special Cosserat rods
 In: Mathematics and Mechanics of Solids 24 (2019), S. 686-700
 ISSN: 1081-2865
 DOI: 10.1177/1081286517754132
- , , :
 Implementation of generalized mechanical interfaces
 In: Proceedings in Applied Mathematics and Mechanics 19 (2019)
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201900031
- , , , :
 A novel continuum approach to gradient plasticity based on the complementing concepts of dislocation and disequilibrium densities
 In: Journal of the Mechanics and Physics of Solids 132 (2019), Art.Nr.: 103680
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2019.103680
- , , :
 Novel vistas on the foundations of peridynamics
 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC) (Cape Town, 2. September 2019 - 4. September 2019)
 In: ADVANCES IN ENGINEERING MATERIALS, STRUCTURES AND SYSTEMS: INNOVATIONS, MECHANICS AND APPLICATIONS, LEIDEN: 2019
 DOI: 10.1201/9780429426506-58
2018
- , , :
 The origin of compression influences geometric instabilities in bilayers
 In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences (2018)
 ISSN: 1364-5021
 DOI: 10.1098/rspa.2018.0267
- , , , , , :
 Region‐ and loading‐specific finite viscoelasticity of human brain tissue
 In: Proceedings in Applied Mathematics and Mechanics 18 (2018), Art.Nr.: e201800169
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201800169
- , , :
 A non-invasive node-based form finding approach with discretization-independent target configuration
 In: Advanced Modeling and Simulation in Engineering Sciences 5 (2018), Art.Nr.: 11
 ISSN: 2213-7467
 DOI: 10.1186/s40323-018-0104-9
- , , :
 Illustration of an improved non-invasive form finding algorithm
 ESAFORM 2018 (Palermo, 23. April 2018 - 25. April 2018)
 In: American Institute of Physics Inc. (Hrsg.): 21st International ESAFORM Conference on Material Forming 2018
 DOI: 10.1063/1.5034960
- , , , :
 A novel model for the lift force acting on a prolate spheroidal particle in an arbitrary non-uniform flow. Part I. Lift force due to the streamwise flow shear
 In: International Journal of Multiphase Flow 104 (2018), S. 103-112
 ISSN: 0301-9322
 DOI: 10.1016/j.ijmultiphaseflow.2018.03.007
- , , , :
 On constitutive models for the momentum transfer to particles in fluid-dominated two-phase flows
 Springer Verlag, 2018
 (Advanced Structured Materials, Bd.80)
 DOI: 10.1007/978-3-319-70563-7_1
- , , , :
 Matrix-Free Locally Adaptive Finite Element Solution of Density-Functional Theory With Nonorthogonal Orbitals and Multigrid Preconditioning
 In: physica status solidi (b) 255 (2018), Art.Nr.: 1800069
 ISSN: 0370-1972
 DOI: 10.1002/pssb.201800069
- , , , , , , , :
 Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen
 6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 13. Dezember 2018 - 13. Dezember 2018)
- , :
 Modelling electro-active polymers with a dispersion-type anisotropy
 In: Smart Materials and Structures 27 (2018), Art.Nr.: 025010
 ISSN: 1361-665X
 DOI: 10.1088/1361-665X/aa9f88
- , , , , , , , , , :
 Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
 iCAT 2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
 In: Proceedings of 7th International Conference on Additive Technologies 2018
- , , :
 Modeling of additively manufactured materials using gradient-enhanced crystal plasticity
 In: Computers & Mathematics with Applications (2018)
 ISSN: 0898-1221
 DOI: 10.1016/j.camwa.2018.05.016
- , , :
 Single crystal plasticity – A mesoscale based approach for modeling the mechanics of additively manufactured Inconel 718
 In: Proceedings in Applied Mathematics and Mechanics (2018)
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201800389
- , :
 Computational first-order homogenization in chemo-mechanics
 In: Archive of Applied Mechanics 88 (2018), S. 271-286
 ISSN: 0939-1533
 DOI: 10.1007/s00419-017-1287-0
- , , :
 Improvements on a non-invasive, parameter-free approach to inverse form finding
 In: Computational Mechanics 61 (2018), S. 433-447
 ISSN: 0178-7675
 DOI: 10.1007/s00466-017-1468-2
- , , :
 Dissipation-consistent modelling and classification of extended plasticity formulations
 In: Journal of the Mechanics and Physics of Solids 119 (2018), S. 118-139
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2018.06.002
- , , :
 On the Influence of the Coupled Invariant in Thermo-Electro-Elasticity
 In: Generalized Models and Non-classical Approaches in Complex Materials, 2018, S. 533-554
 DOI: 10.1007/978-3-319-72440-9_28
- , , :
 Numerical modelling of thermo-electro-viscoelasticity with field-dependent material parameters
 In: International Journal of Non-Linear Mechanics 106 (2018), S. 13-24
 ISSN: 0020-7462
 DOI: 10.1016/j.ijnonlinmec.2018.08.016
- , , , :
 Fuzzy-Stochastic FEM-based homogenization framework for materials with polymorphic uncertainties in the microstructure
 In: International Journal for Numerical Methods in Engineering (2018)
 ISSN: 0029-5981
 DOI: 10.1002/nme.5947
- , , :
 Two reduction methods for stochastic FEM based homogenization using global basis functions
 In: Computer Methods in Applied Mechanics and Engineering 332 (2018), S. 488-519
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2018.01.002
- , , :
 Hyperelastic analysis based on a polygonal finite element method
 In: Mechanics of Advanced Materials and Structures 25 (2018), S. 930-942
 ISSN: 1537-6494
 DOI: 10.1080/15376494.2017.1329463
- , , , , :
 Resonance phenomena in oscillatory shear rheometry: Influence of material parameters
 Nordic Polymer Days 2018 (Kopenhagen, 28. Mai 2018 - 30. Mai 2018)
- , :
 Control of minimum member size in parameter-free structural shape optimization by a medial axis approximation
 In: Computational Mechanics 61 (2018), S. 717-727
 ISSN: 0178-7675
 DOI: 10.1007/s00466-017-1477-1
- , , :
 Growth-induced instabilities of an elastic film on a viscoelastic substrate: Analytical solution and computational approach via eigenvalue analysis
 In: Journal of Mechanics of Materials and Structures 13 (2018), S. 571-585
 ISSN: 1559-3959
 DOI: 10.2140/jomms.2018.13.571
- , , , :
 Aspects of computational homogenization in magneto-mechanics: Boundary conditions, RVE size and microstructure composition
 In: International Journal of Solids and Structures 130-131 (2018), S. 105-121
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2017.10.009
2017
- , , :
 Molecular dynamics study of ferroelectric domain nucleation and domain switching dynamics
 In: Scientific Reports (2017)
 ISSN: 2045-2322
 DOI: 10.1038/s41598-017-01002-0
- , , :
 Non-linear switching kinetics of ferroelectric mono-domain single crystals
 8th ECCOMAS Thematic Conference on Smart Structures and the 6th International Conference on Smart Materials and Nanotechnology in Engineering (Madrid, 5. Juni 2017 - 8. Juni 2017)
 URL: http://congress.cimne.com/smart2017/admin/files/fileabstract/a41.pdf
- , , , , :
 Wrinkling instabilities in soft bi-layered systems
 In: Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences 375 (2017)
 ISSN: 1364-503X
 DOI: 10.1098/rsta.2016.0163
- , , , , , , , , , , :
 Mechanical characterization of human brain tissue
 In: Acta Biomaterialia 48 (2017), S. 319–340
 ISSN: 1742-7061
 DOI: 10.1016/j.actbio.2016.10.036
- , , , , , :
 Rheological characterization of human brain tissue
 In: Acta Biomaterialia (2017)
 ISSN: 1742-7061
 DOI: 10.1016/j.actbio.2017.06.024
- , , , , :
 Viscoelastic parameter identification of human brain tissue
 In: Journal of the Mechanical Behavior of Biomedical Materials 74 (2017), S. 463-476
 ISSN: 1751-6161
 DOI: 10.1016/j.jmbbm.2017.07.014
- , :
 On the influence of inhomogeneous stiffness and growth on mechanical instabilities in the developing brain
 In: International Journal of Solids and Structures (2017)
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2017.08.010
- , , , , :
 Flow relations and yield functions for dissipative strain-gradient plasticity
 International conference on Emerging Trends in Applied Mathematics and Mechanics, ETAMM 2016 (Perpignan, FRA, 30. Mai 2016 - 3. Juni 2016)
 In: Mircea Sofonea, Francesco dell’Isola, David Steigmann (Hrsg.): Advanced Structured Materials 2017
 DOI: 10.1007/978-981-10-3764-1_3
- , , , , :
 Some properties of the dissipative model of strain-gradient plasticity
 In: Philosophical Magazine 97 (2017), S. 693-717
 ISSN: 1478-6435
 DOI: 10.1080/14786435.2016.1274836
- , , :
 Inverse form finding with H-adaptivity and an application to a notch stamping process
 COMPLAS 2017 (Barcelona, 5. September 2017 - 7. September 2018)
 In: International Center for Numerical Methods in Engineering (Hrsg.): Proceedings of the 14th International Conference on Computational Plasticity - Fundamentals and Applications 2017
 URL: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85045301572∂nerID=40&md5=538752db49a36adbf24b6bb7f9ec5e0b
- , , , :
 Convergence study of the h-adaptive PUM and the hp-adaptive FEM applied to eigenvalue problems in quantum mechanics
 In: Advanced Modeling and Simulation in Engineering Sciences 4 (2017), S. 7
 ISSN: 2213-7467
 DOI: 10.1186/s40323-017-0093-0
- , , :
 COUPLED THERMALLY GENERAL IMPERFECT AND MECHANICALLY COHERENT ENERGETIC INTERFACES SUBJECT TO IN-PLANE DEGRADATION
 In: Journal of Mechanics of Materials and Structures (2017)
 ISSN: 1559-3959
 Open Access: https://msp.org/jomms/2017/12-3/jomms-v12-n3-p03-p.pdf
 URL: https://msp.org/jomms/2017/12-3/jomms-v12-n3-p03-p.pdf
- , , :
 Surface plasticity: theory and computation
 In: Computational Mechanics (2017)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-017-1517-x
 URL: https://link.springer.com/article/10.1007/s00466-017-1517-x?wt_mc=Internal.Event.1.SEM.ArticleAuthorOnlineFirst#citeas
- , , :
 Towards an efficient two-scale approach to model technical textiles
 In: Computational Mechanics 59 (2017), S. 385-401
 ISSN: 0178-7675
 DOI: 10.1007/s00466-016-1354-3
- , , :
 Micro-to-macro transition accounting for general imperfect interfaces
 In: Computer Methods in Applied Mechanics and Engineering 317 (2017), S. 274-317
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2016.12.025
- , , :
 Adaptive Poly-FEM for the analysis of plane elasticity problems
 In: International Journal of Computational Methods in Engineering Science and Mechanics 18 (2017), S. 146-165
 ISSN: 1550-2287
 DOI: 10.1080/15502287.2017.1301596
- , , , :
 On gradient-based optimization strategies for inverse problems in metal forming
 In: GAMM-Mitteilungen 40 (2017), S. 27-50
 ISSN: 0936-7195
 DOI: 10.1002/gamm.201710004
- , , :
 Towards a thermo-magneto-mechanical coupling framework for magneto-rheological elastomers
 In: International Journal of Solids and Structures (2017)
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2017.08.022
- , , :
 Numerical modelling of nonlinear thermo-electro-elasticity
 In: Mathematics and Mechanics of Solids (2017)
 ISSN: 1081-2865
 DOI: 10.1177/1081286517729867
- , , , , , :
 Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V
 In: International Journal of Advanced Manufacturing Technology (2017)
 ISSN: 0268-3768
 DOI: 10.1007/s00170-016-8819-6
 URL: http://link.springer.com/article/10.1007/s00170-016-8819-6
- , :
 On structural shape optimization using an embedding domain discretization technique
 In: International Journal for Numerical Methods in Engineering 109 (2017), S. 1315 - 1343
 ISSN: 0029-5981
 DOI: 10.1002/nme.5326
- , , :
 Bounds on size-dependent behavior of composites
 In: Philosophical Magazine 17 (2017), S. 1-27
 ISSN: 1478-6435
 DOI: 10.1080/14786435.2017.1408967
- , , , , :
 A numerical study of different projection-based model reduction techniques applied to computational homogenisation
 In: Computational Mechanics (2017)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-017-1428-x
- , , :
 Thermal modelling of selective beam melting processes using heterogeneous time step sizes
 2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, DEU, 11. Oktober 2017 - 13. Oktober 2017)
 In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017
- , , , , :
 On the wall slip phenomenon of elastomers in oscillatory shear measurements using parallel-plate rotational rheometry: I. Detecting wall slip
 In: Polymer Testing (2017)
 ISSN: 0142-9418
 DOI: 10.1016/j.polymertesting.2017.05.035
- , , , , :
 On the wall slip phenomenon of elastomers in oscillatory shear measurements using parallel-plate rotational rheometry: II. Influence of experimental conditions
 In: Polymer Testing 61 (2017), S. 455-463
 ISSN: 0142-9418
 DOI: 10.1016/j.polymertesting.2017.05.036
- , , , , :
 Preparation of magnetorheological elastomers and their slip-free characterization by means of parallel-plate rotational rheometry
 In: Smart Materials and Structures 26 (2017), Art.Nr.: 085004
 ISSN: 1361-665X
 DOI: 10.1088/1361-665X/aa6b63
 URL: http://iopscience.iop.org/article/10.1088/1361-665X/aa6b63
2016
- , , :
 Reduced-order modelling for linear heat conduction with parametrised moving heat sources
 In: GAMM-Mitteilungen 39 (2016), S. 170-188
 ISSN: 0936-7195
 DOI: 10.1002/gamm.201610011
- , :
 Size effects of 109? domain walls in rhombohedral barium titanate single crystals--A molecular statics analysis
 In: Journal of Applied Physics 119 (2016)
 ISSN: 0021-8979
 DOI: 10.1063/1.4939600
- , , :
 A thermo-mechanical cohesive zone model accounting for mechanically energetic Kapitza interfaces
 In: International Journal of Solids and Structures (2016)
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2016.04.035
 URL: http://www.sciencedirect.com/science/article/pii/S0020768316300592
- , , :
 Coherent energetic interfaces accounting for in-plane degradation
 In: International Journal of Fracture (2016)
 ISSN: 0376-9429
 URL: https://link.springer.com/article/10.1007%2Fs10704-016-0160-4
- , , :
 Highly-conductive energetic coherent interfaces subject to in-plane degradation
 In: Mathematics and Mechanics of Solids (2016)
 ISSN: 1081-2865
 DOI: 10.1177/1081286516642818
 URL: http://journals.sagepub.com/doi/abs/10.1177/1081286516642818
- , , :
 Non-coherent energetic interfaces accounting for degradation
 In: Computational Mechanics (2016)
 ISSN: 0178-7675
 URL: https://link.springer.com/article/10.1007%2Fs00466-016-1342-7
- , , :
 Aspects of implementing constant traction boundary conditions in computational homogenization via semi-Dirichlet boundary conditions
 In: Computational Mechanics (2016), S. 1-15
 ISSN: 0178-7675
 DOI: 10.1007/s00466-016-1333-8
- , , :
 Mesoscopic modelling of additively manufactured Inconel 718
 5th International Conference on Additive Technologies - iCAT2016 (Nürnberg)
 In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (Hrsg.): Proceedings 6th International Conference on Additive Technologies - iCAT2016, Ljubljana: 2016
- , , :
 Modelling additive manufactured materials using a crystal plasticity model
 In: Proceedings in Applied Mathematics and Mechanics 16 (2016), S. 355-356
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201610166
- , :
 Comparative computational analysis of the Cahn--Hilliard equation with emphasis on C1-continuous methods
 In: Journal of Computational Physics 322 (2016), S. 783-803
 ISSN: 0021-9991
 DOI: 10.1016/j.jcp.2016.07.005
- , , , , :
 A non-invasive form finding approach with application to metal forming
 In: Production Engineering 10 (2016), S. 93-102
 ISSN: 0944-6524
 DOI: 10.1007/s11740-016-0659-6
- , :
 A non-invasive heuristic approach to shape optimization in forming
 In: Computational Mechanics accepted (2016), S. 169-191
 ISSN: 0178-7675
 DOI: 10.1007/s00466-015-1226-2
- , :
 Case study on the influence of kinematic hardening within a parameter-free and non-invasive form finding approach
 Int. Conf. on Numerical Methods in Industrial Forming Processes (Troyes, 4. Juli 2016 - 6. Juli 2016)
 In: MATEC Web of Conferences 2016
 DOI: 10.1051/matecconf/20168011007
- , , , , , , :
 Uniaxial deformation of polystyrene–silica nanocomposites studied by hybrid molecular dynamics–finite element simulations
 In: Computational Materials Science 129 (2016), S. 1-12
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2016.11.031
- , , :
 On nonlinear thermo-electro-elasticity
 In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences (2016)
 ISSN: 1364-5021
- , , , , :
 Computational electro- and magneto-elasticity for quasi-incompressible media immersed in free space
 In: International Journal for Numerical Methods in Engineering 108 (2016), S. 1307--1342
 ISSN: 0029-5981
 DOI: 10.1002/nme.5254
- , , , , , :
 Investigation of interphase effects in silica-polystyrene nanocomposites based on a hybrid molecular-dynamics-finite-element simulation framework
 In: Physical Review E - Statistical, Nonlinear, and Soft Matter Physics 93 (2016), Art.Nr.: 052505
 ISSN: 1550-2376
 DOI: 10.1103/PhysRevE.93.052505
- , :
 Modified SFEM for computational homogenization of heterogeneous materials with microstructural geometric uncertainties
 In: Computational Mechanics 57 (2016), S. 123-147
 ISSN: 0178-7675
 DOI: 10.1007/s00466-015-1224-4
- , :
 On stochastic FEM based computational homogenization of magneto-active heterogeneous materials with random microstructure
 In: Computational Mechanics 58 (2016), S. 981-1002
 ISSN: 0178-7675
 DOI: 10.1007/s00466-016-1329-4
- , , :
 Aspects of Computational Homogenization at Finite Deformations: A Unifying Review From Reuss' to Voigt's Bound
 In: Applied Mechanics Reviews 68 (2016), Art.Nr.: 050801
 ISSN: 0003-6900
 DOI: 10.1115/1.4034024
- , , , , :
 Numerical homogenization of elastic and thermal material properties for metal matrix composites (MMC)
 In: Continuum Mechanics and Thermodynamics (2016)
 ISSN: 0935-1175
 DOI: 10.1007/s00161-016-0515-0
- , , , :
 A thermo-viscoplastic constitutive law for isotropic hardening of metals
 In: Archive of Applied Mechanics 2017 (2016), S. 129-157
 ISSN: 0939-1533
 DOI: 10.1007/s00419-016-1181-1
- , , , :
 On the formulation and implementation of geometric and manufacturing constraints in node-based shape optimization
 In: Structural and Multidisciplinary Optimization 53 (2016), S. 881 - 892
 ISSN: 1615-147X
 DOI: 10.1007/s00158-015-1359-0
- , :
 On curvature approximation in 2D and 3D parameter-free shape optimization
 In: Structural and Multidisciplinary Optimization (2016)
 ISSN: 1615-147X
 DOI: 10.1007/s00158-016-1595-y
- , , , , :
 Computational Homogenisation using Reduced-Order Modelling applied to Hyperelasticity
 In: Proceedings in Applied Mathematics and Mechanics 16 (2016), S. 551-552
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201610264
- , , :
 Reducing computational cost of the simulation of selective laser melting of PA12
 6th International Conference on Additive Technologies - iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
 In: Igor Drstvenšek, Dietmar Drummer und Michael Schmidt (Hrsg.): Proceedings of the 6th International Conference on Additive Technologies, Ljubljana: 2016
- , , , , :
 Nonlinear viscoelastic behavior or measuring artifact? On the wall slip of magnetorheological (MR) elastomers
 17th International Congress on Rheology (Kyoto, 8. August 2016 - 13. August 2016)
- , :
 On the modeling of equilibrium twin interfaces in a single-crystalline magnetic shape-memory alloy sample—III: Magneto-mechanical behaviors
 In: Continuum Mechanics and Thermodynamics 28 (2016), S. 885-913
 ISSN: 0935-1175
 DOI: 10.1007/s00161-015-0452-3
- , :
 On the modeling of equilibrium twin interfaces in a single-crystalline magnetic shape memory alloy sample. II: numerical algorithm
 In: Continuum Mechanics and Thermodynamics 28 (2016), S. 669-698
 ISSN: 0935-1175
 DOI: 10.1007/s00161-014-0403-4
- , , , , , :
 Brain stiffness increases with myelin content
 In: Acta Biomaterialia (2016), S. 265–272
 ISSN: 1742-7061
 DOI: 10.1016/j.actbio.2016.07.040
- , , :
 Effects of Boiling Water Reactor Medium on the Fatigue Life of Austenitic Stainless Steels
 In: Journal of Pressure Vessel Technology-Transactions of the Asme 138 (2016), S. 031406-1 - 031406-6
 ISSN: 0094-9930
 DOI: 10.1115/1.4032651
- , , :
 The Effect of Heat Treatments at Different Plastic States on the Isotropic Hardening Behavior of Austenitic Stainless Steel
 Annual Meeting on Nuclear Technology (Hamburg, 10. Mai 2016 - 12. Mai 2016)
 In: Compacts of the 47th AMNT 2016
- , , , :
 Computational Homogenization in Magneto-Mechanical Composites
 In: Proceedings in Applied Mathematics and Mechanics 16 (2016), S. 501-502
 ISSN: 1617-7061
 DOI: 10.1002/pamm.201610239
2015
- , , , :
 Effect of the cutting condition and the reinforcement phase on the thermal load of the workpiece when dry turning aluminum metal matrix composites
 In: International Journal of Advanced Manufacturing Technology - (2015), S. 1-18
 ISSN: 0268-3768
 DOI: 10.1007/s00170-015-7444-0
- , , , :
 Fertigungsgenauigkeit beim Drehen steigern - Einfluss der Prozessparameter auf die Maßhaltigkeit bei der Trockenbearbeitung
 In: VDI-Z Integrierte Produktion 157 (2015), S. 42-45
 ISSN: 0341-7255
- , , , , , , :
 Mechanical properties of gray and white matter brain tissue by indentation
 In: Journal of the Mechanical Behavior of Biomedical Materials (2015), S. 318-330
 ISSN: 1751-6161
 DOI: 10.1016/j.jmbbm.2015.02.024
- , , , :
 Size and curvature regulate pattern selection in the mammalian brain
 In: Extreme Mechanics Letters 4 (2015), S. 193-198
 ISSN: 2352-4316
 DOI: 10.1016/j.eml.2015.07.004
- , , :
 Physical biology of human brain development
 In: Frontiers in Cellular Neuroscience 9 (2015), S. 1-13
 ISSN: 1662-5102
 DOI: 10.3389/fncel.2015.00257
- , , :
 Secondary instabilities modulate cortical complexity in the mammalian brain
 In: Philosophical Magazine 95 (2015), S. 3244–3256
 ISSN: 1478-6435
 DOI: 10.1080/14786435.2015.1024184
- , , , :
 Primary and secondary instabilities in soft bilayered systems
 GAMM Jahrestagung (Lecce)
 In: PAMM, Weinheim: 2015
 DOI: 10.1002/pamm.201510131
- , , :
 Interface properties influence the effective dielectric constant of composites
 In: Philosophical Magazine 95 (2015), S. 3402-3412
 ISSN: 1478-6435
 DOI: 10.1080/14786435.2015.1051155
- , , :
 Surface magnetoelasticity theory
 In: Archive of Applied Mechanics 85 (2015), S. 1265-1288
 ISSN: 0939-1533
 DOI: 10.1007/s00419-014-0938-7
- , , , :
 Micromechanics modeling of magneto-sensitive polymeric materials during curing
 20th International Conference on Composite Materials, ICCM 2015 (Copenhagen, DNK, 19. Juli 2015 - 24. Juli 2015)
 In: ICCM International Conferences on Composite Materials 2015
- , , :
 On the adaptive finite element analysis of the Kohn-Sham equations: Methods, algorithms, and implementation.
 In: International Journal for Numerical Methods in Engineering (2015), S. n/a--n/a
 ISSN: 0029-5981
 DOI: 10.1002/nme.5140
- , :
 An atomistic scale analysis of ferroelectric nanodomain interfaces
 86th GAMM Annual Meeting (Lecce, Italy)
 In: GAMM (Hrsg.): Proceedings in Applied Mathematics and Mechanics, Weiheim: 2015
 DOI: 10.1002/pamm.201510134
- , :
 Molecular statics simulations of ferroelectric barium titanate in the rhombohedral phase
 In: GAMM-Mitteilungen 38 (2015), S. 132-146
 ISSN: 0936-7195
 DOI: 10.1002/gamm.201510007
 URL: http://onlinelibrary.wiley.com/doi/10.1002/gamm.201510007/abstract
- , :
 Molecular statics simulations of head to head and tail to tail nanodomains of rhombohedral barium titanate
 In: Computational Materials Science 97 (2015), S. 20-25
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2014.10.001
- , , :
 Computational homogenization of one-dimensional textile structures
 7th International Conference on Textile Composites and Inflatable Structures, STRUCTURAL MEMBRANES 2015 (Barcelona, ESP, 19. Oktober 2015 - 21. Oktober 2015)
 In: Eugenio Onate, Bernd Kroplin, Kai-Uwe Bletzinger (Hrsg.): Proceedings of the 7th International Conference on Textile Composites and Inflatable Structures, STRUCTURAL MEMBRANES 2015 2015
- , , :
 Computational homogenization of rope-like technical textiles
 In: Computational Mechanics 55 (2015), S. 577-590
 ISSN: 0178-7675
 DOI: 10.1007/s00466-015-1124-7
- , , :
 A web-based tool for the interactive visualization of stresses in an infinite plate with an elliptical hole under simple tension: www.ltm.fau.de/plate .
 In: Archive of Applied Mechanics (2015), S. 1-9
 ISSN: 0939-1533
 DOI: 10.1007/s00419-015-1049-9
- , , , , :
 Computational homogenization of nano-materials accounting for size effects via surface elasticity
 In: GAMM-Mitteilungen 38 (2015), S. 285-312
 ISSN: 0936-7195
 DOI: 10.1002/gamm.201510016
- , :
 Inverse analysis for heterogeneous materials and its application to viscoelastic curing polymers
 In: Computational Mechanics 55 (2015), S. 603-615
 ISSN: 0178-7675
 DOI: 10.1007/s00466-015-1126-5
- , , , , , , , , :
 Experimental verification of a benchmark forming simulation
 In: Key Engineering Materials 639 (2015), S. 251-258
 ISSN: 1013-9826
 DOI: 10.4028/www.scientific.net/KEM.639.251
- , :
 A global damping factor for a non-invasive form finding algorithm
 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce, Italy)
 In: GAMM (Hrsg.): Proc. Appl. Math. Mech., Weinheim: 2015
 DOI: 10.1002/pamm.201510154
- , :
 Application of a non-invasive form-finding algorithm to the ring compression test with varying friction coefficients
 In: Key Engineering Materials 651 (2015), S. 1381-1386
 ISSN: 1013-9826
 DOI: 10.4028/www.scientific.net/KEM.651-653.1381
- , , , , , , , , :
 Experimentelle Verifizierung eines Benchmark-Umformprozesses
 In: Tagungsband zum 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium Blechmassivumformung 2015 - DFG Transregio 73, Aachen: 2015
- , , , , , , :
 Development of a feature adapted measurement evaluation strategy
 MacroScale 2014 - Recent developments in traceable dimensional measurements (Wien, 28. Oktober 2014 - 30. Oktober 2014)
 DOI: 10.7795/810.20150325P
- , , , :
 A novel spectral formulation for transversely isotropic magneto-elasticity
 In: Mathematics and Mechanics of Solids - (2015), S. -
 ISSN: 1081-2865
- , , , :
 Computational Homogenization of Micromechanically Resolved Textile Materials
- , , , :
 A multi-scale approach to model the curing process in magneto-sensitive polymeric materials
 In: International Journal of Solids and Structures 69-70 (2015), S. 34-44
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2015.06.011
- , , :
 Modelling the curing process in magneto-sensitive polymers: Rate-dependence and shrinkage
 In: International Journal of Non-Linear Mechanics 74 (2015), S. 108-121
 ISSN: 0020-7462
 DOI: 10.1016/j.ijnonlinmec.2015.04.008
- , , :
 Modelling the mechanical aspects of the curing process of magneto-sensitive elastomeric materials
 In: International Journal of Solids and Structures 58 (2015), S. 257-269
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2015.01.010
- , :
 Continuum physics of materials with time dependent properties: Reviewing the case of polymer curing
 In: Advances in Applied Mechanics - (2015), S. -
 ISSN: 0065-2156
- , :
 Towards modelling the curing process in particle-filled electro-active polymers
 86th GAMM Annual Meeting (Lecce, Italy)
 In: GAMM (Hrsg.): PAMM, Lecce, Italy: 2015
 DOI: 10.1002/pamm.201510141
- , :
 The Capriccio Method: An Arlequin‐Based Approach to Couple Molecular Dynamics and Finite Element Simulations of Polymers
 GDR Polynano 3661 - Scientific Workshop on multiscale modeling, experimental characterization and simulations of nanocomposites (Université Paris‐Est Marne‐la‐Vallée, 15. Juni 2015 - 15. Juni 2015)
- , , :
 Thermomechanical simulation of the selective laser melting process for PA12 including volumetric shrinkage
 The 30th International Conference of the Polymer Processing Society (Cleveland)
 In: PROCEEDINGS OF PPS-30, Cleveland, USA: 2015
 DOI: 10.1063/1.4918512
- , :
 A staggered approach to shape and topology optimization using the traction method and an evolutionary-type advancing front algorithm
 In: Computer Methods in Applied Mechanics and Engineering 287 (2015), S. 1-30
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2015.01.007
- , :
 A staggered approach to structural shape and topology optimization
 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce)
 In: Proc. Appl. Math. Mech., Weinheim: 2015
 DOI: 10.1002/pamm.201510277
- , :
 Structural optimization of shape and topology using an evolutionary-type advancing front algorithm
 3rd Eccomas Young Investigators Conference (Aachen, Germany)
 In: Conference Proceedings of the YIC GACM 2015 2015
- , , :
 Modelling of iron-filled magneto-active polymers with a dispersed chain-like microstructure
 In: European Journal of Mechanics A-Solids 50 (2015), S. 132-151
 ISSN: 0997-7538
 DOI: 10.1016/j.euromechsol.2014.10.005
- , , , :
 Identification of thermal effects on the diameter deviation of inhomogeneous aluminum metal matrix composite workpieces when dry turning
 In: Production Engineering 9 (2015), S. 473-485
 ISSN: 0944-6524
 DOI: 10.1007/s11740-015-0629-4
- , , :
 Identification of elastoplastic microscopic material parameters within a homogenization scheme
 In: International Journal for Numerical Methods in Engineering 104 (2015), S. 391–407
 ISSN: 0029-5981
- , , :
 Two-scale elastic parameter identification from noisy macroscopic data
 In: Archive of Applied Mechanics (2015)
 ISSN: 0939-1533
- , :
 On curvature control in node-based shape optimization
 GAMM 2015 (Lecce, Italy, 23. März 2015 - 27. März 2015)
 In: PAMM, Lecce, Italy: 2015
 DOI: 10.1002/pamm.201510279
- , , , :
 Phase field simulations of the poling behavior of BaTiO3 nano-scale thin films with SrRuO3 and Au electrodes
 In: European Journal of Mechanics A-Solids 49 (2015), S. 455-466
 ISSN: 0997-7538
 DOI: 10.1016/j.euromechsol.2014.08.007
- :
 Geometrical Foundations of Continuum Mechanics
 Berlin Heidelberg: Springer, 2015
 (Lecture Notes in Applied Mathematics and Mechanics, Bd.2)
 ISBN: 978-3-662-46459-5
 DOI: 10.1007/978-3-662-46460-1
- , :
 On molecular statics simulations of ferroelectric functional materials
 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Lecce, Italy)
 In: GAMM (Hrsg.): Proceedings in Applied Mathematics and Mechanics, Weinheim: 2015
 DOI: 10.1002/pamm.201510005
- , , , , :
 Nonlinear viscoelastic behavior or measuring artifact? On the wall slip of magneto-sensitive elastomers
 10th Annual European Rheology Conference (Nantes, 14. April 2015 - 17. April 2015)
- , , , , :
 On the wall slip of magnetorheological elastomers in parallel-plate rotational rheometry
 7th ECCOMAS Thematic Conference on Smart Structures and Materials (Ponta Delgada / Azores)
- , , , , :
 Wall slip of magnetorheological elastomers in parallel-plate rotational rheometry
 7. TA Anwendertreffen Rheologie - Erlangen (Erlangen)
- , , , :
 Simulation of creep and cyclic viscoplastic strains in high-Cr steel components based on a modified becker-hackenberg model
 In: International Journal of Pressure Vessels and Piping 128 (2015), S. 36-47
 ISSN: 0308-0161
 DOI: 10.1016/j.ijpvp.2015.02.003
- , , :
 Effects of Pressurized Water Reactor Medium on the Fatigue Life of Austenitic Stainless Steels
 In: Journal of Pressure Vessel Technology-Transactions of the Asme 137 (2015), S. 061404-1 - 061404-7
 ISSN: 0094-9930
 DOI: 10.1115/1.4029832
- , , :
 Fatigue Approach for Addressing Environmental Effects in Fatigue Usage Calculation
 In: Atw-International Journal For Nuclear Power 60 (2015), S. 245 - 250
 ISSN: 1431-5254
- , , :
 Fatigue Strain-Life Behavior of Austenitic Stainless Steels in Pressurized Water Reactor Environments
 Pressure Vessels and Piping Conference (Boston, 19. Juli 2015 - 23. Juli 2015)
 In: American Society of Mechanical Engineers (Hrsg.): Proceedings of the ASME 2015 Pressure Vessels & Piping Conference 2015
- , , :
 Statistical Analysis of Fatigue Data for Austenitic Stainless Steels in Water Environments
 Annual Meeting on Nuclear Technology (Berlin, 5. Mai 2015 - 7. Mai 2015)
 In: Compacts of the 46th AMNT 2015
- , , :
 Statistical Models for Estimating Fatigue Lives of Austenitic Stainless Steels in Light Water Reactor Environments
 Structural Mechanics in Reactor Technology (Manchester, 10. August 2015 - 14. August 2015)
 In: Compacts of the 23th SMiRT Conference 2015
2014
- , , :
 A mechanical approach to explain cortical folding phenomena in healthy and diseased brains
 GAMM 2014 (Erlangen, Germany, 10. März 2014 - 14. März 2014)
 In: PAMM, Erlangen, Germany: 2014
 DOI: 10.1002/pamm.201410038
- , , :
 The role of mechanics during brain development
 In: Journal of the Mechanics and Physics of Solids 72 (2014), S. 75-92
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2014.07.010
- , , :
 Surface electrostatics - Theory and computations
 In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences 470 (2014), S. -
 ISSN: 1364-5021
 DOI: 10.1098/rspa.2013.0628
- , , :
 Comparison of several staggered atomistic-to-continuum concurrent coupling strategies
 In: Computer Methods in Applied Mechanics and Engineering 277 (2014), S. 260-280
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2014.04.013
- , :
 Reviewing the roots of continuum formulations in molecular systems. Part III: Stresses, Couple Stresses, Heat Fluxes
 In: Mathematics and Mechanics of Solids (2014), S. -
 ISSN: 1081-2865
 DOI: 10.1177/1081286513516480
- , , , , , , :
 Size effects in a silica-polystyrene nanocomposite: Molecular dynamics and surface-enhanced continuum approaches
 In: Soft Materials 12 (2014), S. S142-S151
 ISSN: 1539-4468
 DOI: 10.1080/1539445X.2014.959597
- , :
 An extended molecular statics algorithm simulating the electromechanical continuum response of ferroelectric materials
 In: Computational Mechanics 54 (2014), S. 1515-1527
 ISSN: 0178-7675
 DOI: 10.1007/s00466-014-1072-7
- , :
 Molecular static simulations of ferroelectric material hysteresis behaviour
 GAMM 2014 (Erlangen, Germany, 10. März 2014 - 14. März 2014)
 In: PAMM, Erlangen, Germany: 2014
 DOI: 10.1002/pamm.201410192
- , :
 On an atomistic scale finite element method for the simulation of ferroelectric functional materials
 2nd Seminar on the mechanics of multifunctional materials (Bad Honnef, Germany)
 In: Proceedings on 2nd SMMM Conference on Smart Materials 2014
- , , :
 Microscale modeling and homogenization of rope-like textiles
 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Erlangen)
 In: Proc. Appl. Math. Mech., Weinheim: 2014
 DOI: 10.1002/pamm.201410262
- , , :
 A comparison between a recursive method based on an inverse mechanical formulation and shape optimization for solving inverse form finding problems in isotropic elastoplasticity
 GAMM 2014 (Erlangen, 10. März 2014 - 14. März 2014)
 In: PAMM 2014, Erlangen, Germany: 2014
 DOI: 10.1002/pamm.201410199
- , , :
 On a recursive formulation for solving inverse form finding problems in isotropic elastoplasticity
 In: Advanced Modeling and Simulation in Engineering Sciences 1 (2014), S. -
 ISSN: 2213-7467
 DOI: 10.1186/2213-7467-1-10
- , , :
 General imperfect interfaces
 In: Computer Methods in Applied Mechanics and Engineering 275 (2014), S. 76-97
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2014.02.022
- , , , :
 A unified computational framework for bulk and surface elasticity theory: A curvilinear-coordinate-based finite element methodology
 In: Computational Mechanics 54 (2014), S. 745-762
 ISSN: 0178-7675
 DOI: 10.1007/s00466-014-1030-4
- , , :
 A novel strategy to identify the critical conditions for growth-induced instabilities
 In: Journal of the Mechanical Behavior of Biomedical Materials 29 (2014), S. 20-32
 ISSN: 1751-6161
 DOI: 10.1016/j.jmbbm.2013.08.017
- , , :
 Two-scale computational homogenization of electro-elasticity at finite strains
 In: Computer Methods in Applied Mechanics and Engineering 278 (2014), S. 62-79
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2014.04.020
- , , :
 Thermomechanics of solids with general imperfect coherent interfaces
 In: Archive of Applied Mechanics 84 (2014), S. 1409-1426
 ISSN: 0939-1533
 DOI: 10.1007/s00419-014-0870-x
- , , :
 On inverse form finding for orthotropic plasticity
 In: Computer Assisted Mechanics and Engineering Sciences 20 (2014), S. 337-348
 ISSN: 1232-308X
- , , :
 Optimum blank design by using the inverse FEM in orthotropic elastoplasticity
 GAMM 2014 (Erlangen, Germany, 10. März 2014 - 14. März 2014)
 In: PAMM 2014
 DOI: 10.1002/pamm.201410164
- , :
 A fast approach to shape optimization by using the inverse FEM
 In: Key Engineering Materials 611 (2014), S. 1404-1412
 ISSN: 1013-9826
 DOI: 10.4028/www.scientific.net/KEM.611-612.1404
- , , :
 Adaptive finite elements based on sensitivities for topological mesh changes
 In: Control and Cybernetics 43 (2014), S. 279-306
 ISSN: 0324-8569
 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85018838294&origin=inward
- , , :
 Finite strain modelling for the curing process in magneto-viscoelasticity
 22nd ACME (University of Exeter, UK)
 In: Proceedings on 22nd ACME Conference on Computational Mechanics 2014
- , :
 Degree of cure-dependent modelling for polymer curing processes at small-strain. Part I: Consistent reformulation
 In: Computational Mechanics 53 (2014), S. 777-87
 ISSN: 0178-7675
 DOI: 10.1007/s00466-013-0929-5
 URL: http://link.springer.com/article/10.1007%2Fs00466-013-0929-5
- , , :
 A comprehensive characterization of the electro-mechanically coupled properties of VHB 4910 polymer
 In: Archive of Applied Mechanics 85 (2014), S. 523 - 537
 ISSN: 0939-1533
 DOI: 10.1007/s00419-014-0928-9
- , , :
 On characterization of the electro-mechanically coupled properties of VHB polymer
 SMMM2 (Bad Honnef, Germany)
 In: Proceedings on 2nd SMMM Conference on Smart Materials 2014
- , , , , :
 Towards a computational model of magneto-sensitive polymers
 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (Erlangen, 10. März 2014 - 14. März 2014)
- , , :
 Molecular dynamics and finite elements: an approach to couple different worlds
 GAMM 2014 (Erlangen, Germany, 10. März 2014 - 14. März 2014)
 In: PAMM, Erlangen, Germany: 2014
 DOI: 10.1002/pamm.201410272
- , , , :
 Numerical simulation of particles movement in cellular flows under the influence of magnetic forces
 In: International Journal of Simulation Modelling 13 (2014), S. 300-311
 ISSN: 1726-4529
 DOI: 10.2507/IJSIMM13(3)4.268
- , , , , :
 Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12
 In: Computational Materials Science 93 (2014), S. 239-248
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2014.06.046
- , , :
 Simulation of the temperature distribution in the selective beam melting process for polymer material
 29th International Conference of the Polymer Processing Society (Nuremberg, Germany, 15. Juli 2013 - 19. Juli 2013)
 In: 29th International Conference of the Polymer Processing Society, USA: 2014
 DOI: 10.1063/1.4873876
- , , :
 Thermomechanical Simulation of the Electron Beam Melting Process for TiAl6V4
 GAMM 2014 (Erlangen, Germany, 10. März 2014 - 14. März 2014)
 In: Proceedings in Applied Mathematics and Mechanics, Erlangen, Germany: 2014
 DOI: 10.1002/pamm.201410219
- , , :
 Simulation von Temperaturfeldern und mechanischen Materialverhalten in additiven Fertigungsprozessen
 3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nuremberg, Germany, 12. April 2014)
 In: 3. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2014
- , , :
 Thermomechanical finite element simulations of selective electron beam melting processes: Performance considerations
 In: Computational Mechanics 54 (2014), S. 109-122
 ISSN: 0178-7675
 DOI: 10.1007/s00466-014-1026-0
- , , , , :
 On the discrete variant of the traction method in parameter-free shape optimization
 In: Computer Methods in Applied Mechanics and Engineering 278 (2014), S. 119-144
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2014.05.009
- , , :
 On regularization in parameter-free shape optimization
 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Erlangen, 10. März 2014 - 14. März 2014)
 In: Proc. Appl. Math. Mech., Weinheim: 2014
 DOI: 10.1002/pamm.201410375
- , :
 An integrated approach to shape optimization and mesh adaptivity based on material residual forces
 In: Computer Methods in Applied Mechanics and Engineering 278 (2014), S. 640-663
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2014.06.010
- , , :
 Nonlinear magneto-viscoelasticity of transversally isotropic magneto-active polymers
 In: Proceedings of the Royal Society A-Mathematical Physical and Engineering Sciences 470 (2014), S. -
 ISSN: 1364-5021
 DOI: 10.1098/rspa.2014.0082
 URL: http://rspa.royalsocietypublishing.org/content/470/2166/20140082.short?rss=1
- , , , , :
 Rate dependent deformations in magneto-rheological elastomers: Modelling and experiments
 IUTAM Symposium on Thermomechanical-Electromagnetic coupling in solids: Microstructral and Stability Aspects (Paris, 16. Juni 2014 - 18. Juni 2014)
- , , :
 On rate-dependent dissipation effects in electro-elasticity
 In: International Journal of Non-Linear Mechanics 62 (2014), S. 1-11
 ISSN: 0020-7462
 DOI: 10.1016/j.ijnonlinmec.2014.02.002
- , , , , , :
 Thermodynamically Consistent Model to Predict the Magneto-Rheological Behavior of Magneto-Sensitive Elastomers
 9th Annual European Rheology Conference (Karlsruhe, 8. April 2014 - 11. April 2014)
- , , , :
 A two-scale simulation method accounting for thermal effects during turning
 GAMM 2014 (Erlangen, Germany, 10. März 2014 - 14. März 2014)
 In: PAMM 2014, Erlangen, Germany: 2014
 DOI: 10.1002/pamm.201410106
- , , , :
 Finite element model to calculate the thermal expansion of the tool and the workpiece in dry turning
 6th CIRP Conference on High Performance Cutting (6th CIRP HPC) (Berkeley, USA)
 In: Proceedia CIRP 2014
 DOI: 10.1016/j.procir.2014.03.087
- , , , :
 Thermo-elastic deformations of the workpiece when dry turning aluminum alloys - A finite element model to predict thermal effects in the workpiece
 In: CIRP Journal of Manufacturing Science and Technology 7 (2014), S. 233-245
 ISSN: 1755-5817
 DOI: 10.1016/j.cirpj.2014.04.006
- , , :
 Manufacturing constraints in parameter-free sensitivity-based shape optimization
 1st International Conference on Engineering and Applied Sciences Optimization (OPT-i) (Kos Island, Greece, 4. Juni 2014 - 6. Juni 2014)
 In: Proceedings of 1st International Conference on Engineering and Applied Sciences Optimization 2014
- , , :
 Manufacturing constraints in parameter-free shape optimization
 GAMM 2014 (Erlangen, Germany, 10. März 2014 - 14. März 2014)
 In: PAMM, Erlangen, Germany: 2014
 DOI: 10.1002/pamm.201410376
- , , , :
 Modeling and simulation of viscous electro-active polymers
 In: European Journal of Mechanics A-Solids 48 (2014), S. 112-128
 ISSN: 0997-7538
 DOI: 10.1016/j.euromechsol.2014.02.001
- , , , :
 Magnetic force and torque on particles subject to a magnetic field
 In: European Journal of Mechanics A-Solids 48 (2014), S. 23-37
 ISSN: 0997-7538
 DOI: 10.1016/j.euromechsol.2014.03.007
- , , , , :
 Magneto-Sensitive Elastomers: An Experimental Point of View
 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (Erlangen)
- , , , , , :
 On the Preparation, Characterisation, Modelling and Simulation of Magneto-Sensitive Elastomers
 Second Seminar on the Mechanics of Multifunctional Materials (Bad Honnef, 5. Mai 2014 - 9. Mai 2014)
 In: Schröder J., Lupascu D.C., Keip M.-A., Brands D. (Hrsg.): Proceedings of the Second Seminar on the Mechanics of Multifunctional Materials 2014
- , , , , , :
 On the Preparation, Characterization, Modeling and Simulation of Magneto-Sensitive Elastomers
 14th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (Granada, 7. Juli 2014 - 11. Juli 2014)
- , , , :
 Simulation of the creep and fatigue damages in high-Cr steel components based on a modified becker-hackenberg model
 ASME 2014 Pressure Vessels and Piping Conference, PVP 2014 (Anaheim, CA, USA, 20. Juli 2014 - 24. Juli 2014)
 In: American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 2014
 DOI: 10.1115/PVP2014-28253
- , , :
 Compilation of Fatigue Data for Austenitic Stainless Steels
 Annual Meeting on Nuclear Technology (Frankfurt am Main, 6. Mai 2014 - 8. Mai 2014)
 In: Compacts of the 45th AMNT 2014
- , , :
 Discussion of Fatigue Data for Austenitic Stainless Steels
 Pressure Vessels and Piping Conference (Anaheim, 20. Juli 2014 - 24. Juli 2014)
 In: American Society of Mechanical Engineers (Hrsg.): Proceedings of the ASME 2014 Pressure Vessels & Piping Conference 2014
- , , :
 Einbindung der neuen Regelwerksanforderungen in lokale Fatigue-Monitoring Lösungen
 Workshop of Materials Testing Institute University of Stuttgart: „Ermüdungsverhalten von Bauteilen in Leichtwasserreaktoren unter Berücksichtigung des Kühlmediums“ (Stuttgart, 10. September 2014 - 10. September 2014)
 In: Materialprüfungsanstalt der Universität Stuttgart (Hrsg.): MPA Workshop 2014: Ermüdungsverhalten 2014
- , , :
 Statistical Model of Water Environment Effects on the Fatigue Behavior of Austenitic Stainless Steels
 Materials Testing Institute University of Stuttgart - Seminar (Stuttgart, 6. Oktober 2014 - 7. Oktober 2014)
 In: Materialprüfungsanstalt der Universität Stuttgart (Hrsg.): Manuscripts of the 40th MPA Seminar 2014
- , , , :
 High gradient magnetic particle separation in a channel with bifurcations
 In: Engineering Analysis With Boundary Elements 49 (2014), S. 22-30
 ISSN: 0955-7997
 DOI: 10.1016/j.enganabound.2014.04.012
- , , , :
 Drehen metallischer Verbundwerkstoffe
 In: wt Werkstattstechnik - Online 104 (2014), S. 33-39
 ISSN: 1436-4980
- , , , :
 Effect of the cutting condition and the reinforcement of the MMC on the machining accuracy Drehen metallischer Verbundwerkstoffe: Einfluss von Prozessparametern und Verstärkungsphase auf die Fertigungsgenauigkeit
 In: wt Werkstattstechnik - Online 104 (2014), S. 33-39
 ISSN: 1436-4980
2013
- , , , :
 Analysis of the machining accuracy when dry turning via experiments and finite element simulations
 In: Production Engineering 8 (2013), S. 41-50
 ISSN: 0944-6524
 DOI: 10.1007/s11740-013-0508-9
- , , :
 Multiscale modeling for composites with energetic interfaces at the micro or nanoscale
 In: Mathematics and Mechanics of Solids - (2013), S. -
 ISSN: 1081-2865
 DOI: 10.1177/1081286513516122
- , , :
 Surface Magnetoelasticity
 In: Journal of the Mechanics and Physics of Solids - (2013), S. -
 ISSN: 0022-5096
- , , :
 On molecular static and surface-enhanced continuum modeling of nano-structures
 In: Computational Materials Science 69 (2013), S. 510-519
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2012.11.053
- , :
 Reviewing the roots of continuum formulations in molecular systems. Part II: Energy and angular momentum balance equations
 In: Mathematics and Mechanics of Solids - (2013), S. -
 ISSN: 1081-2865
 DOI: 10.1177/108128651349030
- , , , :
 Design and validation of a new fixture for the shear testing of cellular solids
 In: Archive of Applied Mechanics 84 (2013), S. 309-321
 ISSN: 0939-1533
 DOI: 10.1007/s00419-013-0801-2
- , , , , , :
 Selektives Laserstrahlschmelzen von Kunststoffen - Modellierung des Temperaturhaushaltes und Einfluss auf resultierende Bauteileigenschaften
 2. Industriekolloquium des SFB 814 (Nürnberg)
 In: 2. Industriekolloquium des SFB 814 2013
- , :
 On molecular statics simulation of ferroelectric barium titanate
 84th GAMM Annual Meeting
 In: Special Issue: 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weinheim: 2013
 DOI: 10.1002/pamm.201310062
 URL: http://onlinelibrary.wiley.com/doi/10.1002/pamm.201310062/abstract
- , , :
 Computational modelling and homogenization of technical textiles
 In: Engineering Structures 50 (2013), S. 68-73
 ISSN: 0141-0296
 DOI: 10.1016/j.engstruct.2013.01.025
- , , :
 Homogenization of heterogeneous, fibre structured materials
 COMPLAS XII (Barcelona, Spain, 3. September 2013 - 5. September 2013)
 In: COMPLAS XII - XII Inernational Conference on Computational Plasticity. Fundamentals and Applications, Barcelona, Spain: 2013
- , , , :
 Homogenization in periodically heterogeneous elastic bodies with multiple micro contact
 In: Mathematics and Mechanics of Solids (2013), S. -
 ISSN: 1081-2865
 DOI: 10.1177/1081286513501104
- , , :
 Computational homogenization in magneto-mechanics
 In: International Journal of Solids and Structures 50 (2013), S. 4197-4216
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2013.08.024
- , , :
 Geometrically nonlinear higher-gradient elasticity with energetic boundaries
 In: Journal of the Mechanics and Physics of Solids 61 (2013), S. 2381-2401
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2013.06.005
- , , :
 Numerical modelling of thermomechanical solids with highly conductive energetic interfaces
 In: International Journal for Numerical Methods in Engineering 93 (2013), S. 551-574
 ISSN: 0029-5981
 DOI: 10.1002/nme.4402
- , , , , :
 Micro-to-macro transitions for continua with surface structure at the microscale
 In: International Journal of Solids and Structures 50 (2013), S. 2561-2572
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2013.03.022
- , , , , , :
 Numerical analysis of the mechanical behavior of lightweight metal-CFRP joints
 In: Advanced Engineering Materials 15 (2013), S. 846-852
 ISSN: 1438-1656
 DOI: 10.1002/adem.201200286
- , , , , , :
 Simulation of adhesive joints by viscoelastic interface material model
 In: Advanced Engineering Materials 15 (2013), S. 861-867
 ISSN: 1438-1656
 DOI: 10.1002/adem.201200374
- , , :
 Investigations on the polygonal finite element method: Constrained adaptive Delaunay tessellation and conformal interpolants
 In: Computers & Structures 120 (2013), S. 33-46
 ISSN: 0045-7949
 DOI: 10.1016/j.compstruc.2013.01.017
- , , :
 Modeling and simulation of curing and damage in thermosetting adhesives
 In: Journal of Adhesion 89 (2013), S. 111
 ISSN: 0021-8464
- , :
 Phenomenological modelling of self-healing polymers
 In: Computational Mechanics 52 (2013), S. 681-692
 ISSN: 0178-7675
 DOI: 10.1007/s00466-013-0840-0
- , :
 More Hyperelastic models for rubber-like materials: Consistent tangent operators and Comparative Study
 In: Journal of the Mechanical Behavior of Materials 22 (2013), S. 27-50
 ISSN: 0334-8938
 DOI: 10.1515/jmbm-2012-0007
- , , , , :
 Towards a computational model of thermal- and magneto-sensitive polymers
 5th International Conference on Computational Methods for Coupled Problems in Science and Engineering (Ibiza, 17. Juni 2013 - 19. Juni 2013)
- , , , , , :
 An Arlequin-based method to couple molecular dynamics and finite element simulations of amorphous polymers nanocomposites
 In: Computer Methods in Applied Mechanics and Engineering 260 (2013), S. 109-129
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2013.03.006
 URL: https://doi.org/10.25593/opus4-fau-17862
- , , , :
 A cohesive crack propagation model: Mathematical theory and numerical solution
 In: Communications on Pure and Applied Analysis 12 (2013), S. 1705-1729
 ISSN: 1534-0392
 DOI: 10.3934/cpaa.2013.12.1705
- , , :
 A theory of finite deformation magneto-viscoelasticity
 In: International Journal of Solids and Structures 50 (2013), S. 38863897
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2013.07.024
- , , , , , , , :
 Vorstellung eines Simulationsbenchmarks für die Blechmassivumformung
 In: Merklein, M., Behrens, B.-A., Tekkaya, A. E. (Hrsg.): Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013, Bamberg: Meisenbach, 2013, S. 53-68
 ISBN: 978-3-87525-353-5
- :
 On generalized crystal-plasticity based on defect-densities in a second-order continuum
 In: GAMM-Mitteilungen 36 (2013), S. 203-218
 ISSN: 0936-7195
 DOI: 10.1002/gamm.201310012
- :
 On the Roots of Continuum Mechanics in Differential Geometry: - A Review -
 DOI: 10.1007/978-3-7091-1371-4_1
- , :
 Computational thermomechanics with boundary structures
 IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, 2010 (Beijing, CHN, 8. August 2010 - 12. August 2010)
 In: Alan Cocks, Jianxiang Wang (Hrsg.): IUTAM Bookseries 2013
 DOI: 10.1007/978-94-007-4911-5_16
- , , :
 On the mechanics of continua with boundary energies and growing surfaces
 In: Journal of the Mechanics and Physics of Solids 61 (2013), S. 1446-1463
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2013.01.007
- , , , , , :
 Molecular dynamics meets finite elements: An approach for coupled simulations of nanocomposites
 Hybrid Particle-Continuum Methods in Computational Materials Physics (Juelich, Germany, 4. März 2013 - 7. März 2013)
 In: Forschungszentrum Jülich GmbH, Zentralbibliothek (Hrsg.): NIC Series, Jülich: 2013
- , , , , :
 Characterisation of Magneto-Sensitive Elastomers; Material Model meets Experimental Results
 13th Bayreuth Polymer Symposium, Bayreuth (Bayreuth, 15. September 2013 - 17. September 2013)
- , :
 Finite element simulation of the magneto-mechanical response of a magnetic shape memory alloy sample
 In: Philosophical Magazine 93 (2013), S. 2630-2653
 ISSN: 1478-6435
 DOI: 10.1080/14786435.2013.782443
- , :
 On the modelling of equilibrium twin interfaces in a single-crystalline magnetic shape memory alloy sample. I: Theoretical formulation
 In: Continuum Mechanics and Thermodynamics 26 (2013), S. 563-592
 ISSN: 0935-1175
 DOI: 10.1007/s00161-013-0319-4
- , , :
 Guidelines for Addressing Environmentally Assisted Fatigue in Fatigue Usage Calculation and Further Recommendations
 Annual Meeting on Nuclear Technology (Berlin, 14. Mai 2013 - 16. Mai 2013)
 In: Compacts of the 44th AMNT 2013
- , , :
 Study on Fatigue Analysis for Operational Load Histories
 Materials Testing Institute University of Stuttgart - Seminar (Stuttgart, 8. Oktober 2013 - 9. Oktober 2013)
 In: Materialprüfungsanstalt der Universität Stuttgart (Hrsg.): Manuscripts of the 39th MPA Seminar 2013
2012
- , , , , , , , :
 Identification of weak spots in the metrological investigation of dynamic machine behaviour
 In: Production Engineering 6 (2012), S. 679-689
 ISSN: 0944-6524
- , , :
 Unified magnetomechanical homogenization framework with application to magnetorheological elastomers
 In: Mathematics and Mechanics of Solids (2012), S. -
 ISSN: 1081-2865
 DOI: 10.1177/1081286512458109
- , , , :
 A Comparison of Atomistic and Enhanced Continuum Approaches at Finite Temperature
 In: Surface effects in solid mechanics, Germany: 2012
- , :
 Reviewing the roots of continuum formulations in molecular systems. Part I: Particle dynamics, statistical physics, mass and linear momentum balance equations
 In: Mathematics and Mechanics of Solids (2012), S. -
 ISSN: 1081-2865
- , , , , :
 Mechanical Behaviour of a Cellular Composite under Quasi-Static, Static and Cyclic Compression Loading
 In: Journal of Materials Science 47 (2012), S. 5635-5645
 ISSN: 0022-2461
 DOI: 10.1007/s10853-012-6432-0
- , , :
 Homogenization and modelling of technical textiles
 ECCOMAS 2012 (Vienna, Austria)
 In: European Congress on Computational Methods in Applied Sciences and Engineering Proceedings, Viena, Austria: 2012
- , , :
 On the homogenization of technical textiles
 In: Bytes and science, Barcelona: International Center for Numerical Methods in Engineering, 2012, S. -
 ISBN: 9788494024320
- , , :
 An adaptive finite element method based on sensitivities for node insertion
 In: GAMM-Mitteilungen 35 (2012), S. 175-190
 ISSN: 0936-7195
 DOI: 10.1002/gamm.201210012
 URL: http://onlinelibrary.wiley.com/doi/10.1002/gamm.201210012/full
- , :
 On a recursive algorithm for avoiding mesh distortion in inverse form finding
 In: Journal of the Serbian Society for Computational Mechanics 6 (2012), S. 216-234
 ISSN: 1820-6530
- , :
 On two different inverse form finding methods for hyperelastic and elastoplastic materials
 GAMM 2012 (Darmstadt, Germany)
 In: PAMM, Germany: 2012
 DOI: 10.1002/pamm.201210122
- , :
 Towards inverse form finding methods for a deep drawing steel DC04
 15th ESAFORM Conference (Erlangen, Germany, 14. März 2012 - 16. März 2012)
 In: 15th ESAFORM Conference Proceeding 2012
 DOI: 10.4028/www.scientific.net/KEM.504-506.619
- , , , , , :
 Dynamic performance of dielectric elastomers utilized as acoustic actuators
 In: Applied Physics A-Materials Science & Processing (2012), S. -
 ISSN: 0947-8396
 DOI: 10.1007/s00339-012-6837-2
- , , :
 Computational aspects of thermomechanical solids with Kapitza interfaces
 In: Computational Materials Science 65 (2012), S. 542-551
 ISSN: 0927-0256
- , , :
 Numerical modelling of thermomechanical solids with mechanically energetic (generalised) Kapitza interfaces
 In: Computational Materials Science 65 (2012), S. 542-551
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2012.06.006
- , , :
 Thermomechanics of Solids with Lower-Dimensional Energetics: On the Importance of Surface, Interface and Curve Structures at the Nanoscale. A Unifying Review
 In: Applied Mechanics Reviews 65 (2012), S. -
 ISSN: 0003-6900
 DOI: 10.1115/1.4023012
- , , , :
 Relationships between the admissible range of surface material parameters and stability of linearly elastic bodies
 In: Philosophical Magazine 92 (2012), S. 3540-3563
 ISSN: 1478-6435
 DOI: 10.1080/14786435.2012.682175
- , , , , , :
 Numerical analysis of the maximum load level in lightweight metal/fibre-reinforced polymer structures
 In: Advanced Engineering Materials accepted (2012), S. -
 ISSN: 1438-1656
- , :
 Finite element formulations for 3d convex polyhedra in nonlinear continuum mechanics
 In: International Journal of Computational Methods in Engineering Science and Mechanics 19 (2012), S. 121-134
 ISSN: 1550-2287
- , , , , , , , , , , :
 Material model identification for DC04 based on the numerical modelling of the polycrystalline microstructure and experimental data
 15th ESAFORM Conference (Erlangen, Germany, 14. März 2012 - 16. März 2012)
 In: 15th ESAFORM Conference Proceeding 2012
 DOI: 10.4028/www.scientific.net/KEM.504-506.993
- , , :
 Adaptive refinement based on asymptotic expansions of finite element solutions for node insertion in 1d
 In: GAMM-Mitteilungen 35 (2012), S. 175-190
 ISSN: 0936-7195
 DOI: 10.1002/gamm.201210012
- , , , , :
 Micro-to-macro transitions for heterogeneous material layers accounting for in-plane stretch
 In: Journal of the Mechanics and Physics of Solids 60 (2012), S. 1221-1239
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2012.01.003
- , , :
 Modelling and computation of curing and damage of thermosets
 In: Computational Materials Science 53 (2012), S. 359-367
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2011.09.013
- , :
 On finite strain models for nano-filled glassy polymers
 ECCMR VII (Dublin, Ireland, 20. September 2011 - 23. September 2011)
 In: Proceedings of the 7th European Conference on Constitutive Models for Rubber 2012
 DOI: 10.1201/b11687-25
- , , :
 Experimental study and numerical modelling of VHB 4910 polymer
 In: Computational Materials Science 59 (2012), S. 65-74
 ISSN: 0927-0256
 DOI: 10.1016/j.commatsci.2012.02.027
- , , , :
 Optimal Design of Brittle Composite Materials: a Nonsmooth Approach
 In: Journal of Optimization Theory and Applications 155 (2012), S. 962-985
 ISSN: 0022-3239
 DOI: 10.1007/s10957-012-0094-6
- , , , :
 Macroscopic modelling of the selective beam melting process
 83rd GAMM (Darmstadt, Germany)
 In: Proceedings in Applied Mathematics and Mechanics, Darmstadt, Germany: 2012
- , , :
 Hyperelastic models for rubber-like materials: Consistent tangent operators and suitability for Treloar's data
 In: Archive of Applied Mechanics 82 (2012), S. 1183-1217
 ISSN: 0939-1533
 DOI: 10.1007/s00419-012-0610-z
- , , :
 On some mixed variational principles in electro-elastostatics
 In: International Journal of Non-Linear Mechanics 47 (2012), S. 341-354
 ISSN: 0020-7462
 DOI: 10.1016/j.ijnonlinmec.2011.08.001
- , :
 On 3-D coupled BEM-FEM simulation of nonlinear electro-elastostatics
 In: Computer Methods in Applied Mechanics and Engineering 201-204 (2012), S. 82-90
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2011.08.024
- , , :
 Simulation of 3d Fatigue Crack Propagation Using an Implicit Time Integration Scheme
 In: International Journal of Fatigue 50 (2012), S. 2-9
 ISSN: 0142-1123
 DOI: 10.1016/j.ijfatigue.2012.07.003
- , , , :
 Analysis of thermo-mechanical effects on the machining accuracy when turning aluminum alloys
 9th International Conference on High Speed Machining (Spain)
 In: Proceedings of the 9th International Conference on High Speed Machining 2012
2011
- , , :
 Computational modeling of case II diffusion in polymeric materials
 24th Nordic Seminar on Computational Mechanics (Helsinki, Finland)
 In: Proceedings of the 24th Nordic Seminar on Computational Mechanics 2011
- , , :
 Models of Solvent Penetration in Glassy Polymers With an Emphasis on Case II Diffusion. A Comparative Review
 In: Applied Mechanics Reviews 64 (2011), S. (1-13)
 ISSN: 0003-6900
 DOI: 10.1115/1.4003955
- , :
 Microscale modelling and homogenization of fiber structured materials
 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Graz, Austria)
 In: Proceedings of Applied Mathematics and Mechanics (PAMM) 2011
- , :
 A comparison between inverse form finding and shape optimization methods for anisotropic hyperelasticity in logarithmic strain space
 GAMM 2011 (Graz, Austria)
 In: Proceedings of Applied Mathematics and Mechanics (PAMM), Weinheim: 2011
 DOI: 10.1002/pamm.201110175
- , :
 On Inverse Form Finding for Anisotropic Elastoplastic Materials
 The 14th International ESAFORM Conference on Material Forming (Belfast, UK)
 In: AIP Conference Proceedings 2011
 DOI: 10.1063/1.3589674
- , :
 Shape Optimization for Anisotropic Elastoplasticity in Logarithmic Strain Space
 XI International Conference on Computational plasticity - Fundamentals and Applications (Barcelona, Spain, 7. September 2011 - 9. September 2011)
 In: COMPLAS XI Proceeding (CD) 2011
- , , , :
 Numerical simulation of particles movement in cellular flows under the influence of magnetic forces
 GAMM 2011 (Graz, Austria)
 In: Proceedings of the 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics, Graz, Austria: 2011
 DOI: 10.1002/pamm.201110276
- , :
 A finite element framework for continua with boundary energies. Part III: The thermomechanical case
 In: Computer Methods in Applied Mechanics and Engineering 200 (2011), S. 1963-1977
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2010.12.013
- , , :
 Geometrically nonlinear continuum thermomechanics coupled to diffusion: a framework for case II diffusion
 In: Advances in Extended and Multifield Theories for Continua, Berlin: Springer Verlag, 2011, S. 89-107 (Lecture Notes in Applied and Computational Mechanics, Bd.59)
 ISBN: 9783642227370
 DOI: 10.1007/978-3-642-22738-7_5
 URL: http://www.springerlink.com/content/660628786906r687/
- , , , :
 Geometrically nonlinear continuum thermomechanics with surface energies coupled to diffusion
 In: Journal of the Mechanics and Physics of Solids 59 (2011), S. 2116-2133
 ISSN: 0022-5096
 DOI: 10.1016/j.jmps.2011.06.002
- , :
 Extension of the Arruda-Boyce model to the modelling of the curing process of polymers
 GAMM 2011 (Graz, Austria)
 In: Proceedings of Applied Mathematics and Mechanics (PAMM), Weiheim: 2011
 DOI: 10.1002/pamm.201110186
- , :
 Modelling and simulation of the curing process of polymers by a modified formulation of the Arruda-Boyce model
 In: Archives of Mechanics 63 (2011), S. 621-633
 ISSN: 0373-2029
- , , , , , :
 A comparison of staggered solution schemes for coupled particle-continuum systems modeled with the Arlequin method
 In: Computational Mechanics 49 (2011), S. 565
 ISSN: 0178-7675
 DOI: 10.1007/s00466-011-0657-7
 URL: https://doi.org/10.25593/opus4-fau-17828
- , , , :
 Towards optimization of crack resistance of composite materials by adjustment of fiber shapes
 In: Engineering Fracture Mechanics 78 (2011), S. 944-960
 ISSN: 0013-7944
 DOI: 10.1016/j.engfracmech.2011.01.007
- , , , , , , :
 Nonperiodic stochastic boundary conditions for molecular dynamics simulations of materials embedded into a continuum mechanics domain
 In: Journal of Chemical Physics 134 (2011), S. 154108
 ISSN: 0021-9606
 DOI: 10.1063/1.3576122
- , , :
 Computational Homogenization and Parameter-Identification for Heterogeneous Inelastic Materials
 GAMM 2011 (Graz, Austria)
 In: Proceedings of Applied Mathematics and Mechanics (PAMM), Weinheim: 2011
 DOI: 10.1002/pamm.201110447
- , , :
 Two-Scale Parameter Identification for heterogeneous elastoplastic materials
 COMPLAS XI (Barcelona, Spain, 7. September 2011 - 9. September 2011)
 In: Proceeding of 11h International Conference on Computational Plasticity, Fundamentals and Applications 2011
- :
 Geometrically Nonlinear Gravito-Elasticity: Hyperelastostatics Coupled to Newtonian Gravitation
 In: International Journal of Engineering Science 49 (2011), S. 1452-1460
 ISSN: 0020-7225
 DOI: 10.1016/j.ijengsci.2011.03.017
- , , , :
 A Deformational and Configurational Framework for Geometrically Nonlinear Continuum Thermomechanics Coupled to Diffusion
 In: International Journal of Non-Linear Mechanics 47 (2011), S. 215-227
 ISSN: 0020-7462
 DOI: 10.1016/j.ijnonlinmec.2011.05.009
- , , :
 Unconstrained and Cauchy-Born-constrained atomistic systems: deformational and configurational mechanics
 In: Archive of Applied Mechanics 81 (2011), S. 669-684
 ISSN: 0939-1533
 DOI: 10.1007/s00419-010-0486-8
- , :
 On the spatial and material motion problems in nonlinear electro-elastostatics with consideration of free space
 In: Mathematics and Mechanics of Solids 17 (2011), S. 803-823
 ISSN: 1081-2865
 DOI: 10.1177/1081286511430161
2010
- , , :
 On the C1 continuous discretization of nonlinear gradient elasticity: a comparison of NEM and FEM based on Bernstein-Bézier patches
 In: International Journal for Numerical Methods in Engineering 82 (2010), S. 1282-1307
 ISSN: 0029-5981
 DOI: 10.1002/nme.2802
- , , , , :
 Isogeometric Analysis of 2D Gradient Elasticity
 In: Computational Mechanics (2010)
 ISSN: 0178-7675
 DOI: 10.1007/s00466-010-0543-8
- , :
 On thermomechanical solids with boundary structures
 In: International Journal of Solids and Structures 47 (2010), S. 3245-3253
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2010.08.009
- , , , :
 A Comparison of Different Approaches in the Multi-Scale Computation of Configurational Forces
 In: International Journal of Fracture (2010), S. accepted
 ISSN: 0376-9429
 DOI: 10.1007/s10704-010-9525-2
- , , :
 A Finite Strain Framework for the Simulation of Polymer Curing. Part II: Viscoelasticity and shrinkage
 In: Computational Mechanics 46 (2010), S. 363
 ISSN: 0178-7675
 DOI: 10.1007/s00466-010-0479-z
- , :
 On bridging domain methods to couple particle- and finite-element-based simulations
 80. GAMM-Jahrestagung (Gdansk, Polen)
 In: Proceedings of the 80th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Weinheim: 2010
 DOI: 10.1002/pamm.200910193
- , , , , , , :
 Simulation of fracture in heterogeneous elastic materials with cohesive zone models
 In: International Journal of Fracture (2010)
 ISSN: 0376-9429
 DOI: 10.1007/s10704-010-9552-z
- , , , :
 Natural element analysis of the Cahn-Hilliard phase-field model
 In: Computational Mechanics 46 (2010), S. 471-493
 ISSN: 0178-7675
 DOI: 10.1007/s00466-010-0490-4
- , , :
 Multi-Scale Parameter Identification
 In: International Journal For Multiscale Computational Engineering 10 (2010), S. 327-342
 ISSN: 1543-1649
 DOI: 10.1615/IntJMultCompEng.2012002175
- , , :
 Parameter Identification over Multiple Scales
 MMM V (Freiburg, Germany)
 In: Proceedings of the 5th conference on Multiscale Materials Modelling 2010
- Winter Werner, Steinmann Paul, Wichmann Manfred, Krafft T., Karl Matthias:
 Quality of alveolar bone - Structure dependant material properties and design of a novel measurement technique
 World Congress of Biomechanics VI (Singapore, 1. August 2010 - 6. August 2010)
 In: IFMBE Proceedings 31, Berlin, Heidelberg, New York: 2010
 DOI: 10.1007/978-3-642-14515-5_242
2009
- , , , :
 Computational Multiscale Modelling of Heterogeneous Material Layers
 In: Engineering Fracture Mechanics 76 (2009), S. 793-812
 ISSN: 0013-7944
 DOI: 10.1016/j.engfracmech.2008.10.018
- , :
 A Finite Element Framework for Continua with Boundary Energies. Part I: The Two-Dimensional Case
 In: Computer Methods in Applied Mechanics and Engineering 198 (2009), S. 2198-2208
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2009.02.008
- , , :
 Towards the treatment of boundary conditions for global crack path tracking in three-dimensional brittle fracture
 In: Computational Mechanics 45 (2009), S. 91-107
 ISSN: 0178-7675
 DOI: 10.1007/s00466-009-0417-0
- , , :
 On the Multiscale Computation of Defect Driving Forces
 In: International Journal For Multiscale Computational Engineering 7 (2009), S. 457-474
 ISSN: 1543-1649
 DOI: 10.1615/IntJMultCompEng.v7.i5.70
- , , :
 A Finite Strain Framework for the Simulation of Polymer Curing. Part I: Elasticity
 In: Computational Mechanics 44 (2009), S. 621-630
 ISSN: 0178-7675
 DOI: 10.1007/s00466-009-0397-0
- , , :
 A Phenomenological Finite Strain Framework for the Simulation of Elastic Curing
 ECCMR VI (Dresden, Germany)
 In: Proceedings of the 6th European Conference on Constitutive Models for Rubber 2009
- , , :
 A Small-Strain Model to Simulate the Curing of Thermosets
 In: Computational Mechanics 43 (2009), S. 769-779
 ISSN: 0178-7675
 DOI: 10.1007/s00466-008-0344-5
- , , :
 Finite Strain Viscoelastic Models to Simulate the Curing Process of Polymers
 International Conference on Material Modelling I (Dortmund, Germany)
 In: Proceedings of 1st International Conference on Material Modelling 2009
- , , , , , , , :
 Chemical and structural characterisation of DGEBA-based expocies by Time of Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) as a preliminary to polymer interphase characterisation
 In: Analytical and Bioanalytical Chemistry 398 (2009), S. 1879-1888
 ISSN: 1618-2642
 DOI: 10.1007/s00216-009-2639-6
- , , , , , , :
 Micro-Macro Characterisation of DGEBA-Based Epoxies on the Way to Polymer Interphase Modelling
 In: International Journal of Adhesion and Adhesives 29 (2009), S. 478-487
 ISSN: 0143-7496
 DOI: 10.1016/j.ijadhadh.2008.10.001
- , , , :
 Smooth conformal alpha-NEM for Gradient Elasticity
 In: The International journal of structural changes in solids: mechanics and applications 1 (2009), S. 83-109
 ISSN: 2163-8160
- , , :
 Computational Homogenization of Defect Driving Forces
 IUTAM Symposium 08-6 (Erlangen, Germany, 20. Oktober 2008 - 24. Oktober 2008)
 In: Proceedings of the IUTAM Symposium on Progress in the Theory and Numerics of Configuration Mechanics (peer reviewed) 2009
 DOI: 10.1007/978-90-481-3447-2_23
- , , :
 Modelling and Simulation of Polymer Curing.
 ESMC VII (Lisbon, Portugal)
 In: Proceedings of the 7th EUROMECH Solid Mechanics Conference 2009
2008
- , , :
 An adaptive singular finite element in nonlinear fracture mechanics
 International Symposium on Defect and Material Mechanics (Aussois, France)
 In: Proceedings of the International Symposium on Defect and Material Mechanics 2008
 DOI: 10.1007/978-1-4020-6929-1_17
- , , :
 Computational Homogenisation of Material Layers with Micromorphic Mesostructure
 In: Philosophical Magazine 88 (2008), S. 3603-3631
 ISSN: 1478-6435
 DOI: 10.1080/14786430802502567
- , , , :
 Continuum-Atomistic Coupling based on Computational Homogenization
 GAMM-Jahrestagung 2008 (Bremen, Germany)
 In: Proceedings of the 79th Annual Meeting of the International Association of Applied Mathematics and Mechanics 2008
 DOI: 10.1002/pamm.200810565
- , , :
 Towards Modeling the Curing Processes of Thermosets
 Bremen, (Germany)
 In: Proceedings of 79th GAMM Annual Conference 2008
 DOI: 10.1002/pamm.200810427
- , , , :
 On phenomenological and micro-mechanical models in finite elasticity and viscoelasticity for rubber-like materials
 Zürich (Schweiz)
 In: Proceedings of sixth International Congress on Industrial Applied Mathematics (ICIAM07) and GAMM Annual Meeting 2008
 DOI: 10.1002/pamm.200700838
- , , :
 On a Solution Strategy for Energy-Based Mesh Optimization in Finite Hyperelastostatics
 In: Computer Methods in Applied Mechanics and Engineering 197 (2008), S. 609-622
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2007.08.005
- , :
 Modelling and Simulation of First and Second Sound in Solids
 In: International Journal of Solids and Structures 45 (2008), S. 6067-6073
 ISSN: 0020-7683
 DOI: 10.1016/j.ijsolstr.2008.07.026
2007
- , , :
 Towards the Algorithmic Treatment of 3D Strong Discontinuities
 In: Communications in Numerical Methods in Engineering 23 (2007), S. 97-108
 ISSN: 1069-8299
 DOI: 10.1002/cnm.885
- , , , :
 Modelling and Computation of 3D Discontinuities in Solids
 Berlin, (Germany)
 In: Proceedings GAMM'06 2007
 DOI: 10.1002/pamm.200610172
- , , , :
 Variational issues in the homogenization of discrete systems
 Cachan, (France)
 In: Proceedings of ECCOMAS 2007
- , , :
 Numerical Modelling of Nonlinear Electroelasticity
 In: International Journal for Numerical Methods in Engineering 70 (2007), S. 685-704
 ISSN: 0029-5981
 DOI: 10.1002/nme.1902
2006
- , , , :
 On the Application of Hansbo's Method for Interface Problems
 IUTAM Symposium on Discretization Methods for Evolving Discontinuities (Lyon, France)
 In: Proceedings of IUTAM Symposium on Discretization Methods for Evolving Discontinuities 2006
- , , :
 A computational approach to nonlinear dynamics of constrained dynamical systems
 6th European Solid Mechanics Conference (Budapest, 28. August 2006 - 1. September 2006)
- , :
 A Geometrically Nonlinear FE Approach for the Simulation of Strong and Weak Discontinuities
 In: Computer Methods in Applied Mechanics and Engineering 195 (2006), S. 5037-5052
 ISSN: 0045-7825
 DOI: 10.1016/j.cma.2005.05.057
- Possart, G, Steinmann, P, Vu, D.-K:
 Coupled modeling and simulation of electro-elastic materials at large strains
 Conference of the SPIE Symposium on Smart Structures and Materials: 'Active Materials: Behavior and Mechanics' (San Diego)
 In: Conference of the SPIE Symposium on Smart Structures and Materials 2006 2006
 DOI: 10.1117/12.651306
 (Conference report)
2005
- , , :
 The discrete null space method for multibody dynamics with application to closed loop systems
 2nd Workshop on Numerical Methods in Multibody Dynamics (Bad Herrenalb, 26. August 2005 - 28. August 2005)
- , , :
 A Finite Element Method for the Computational Modelling of Cohesive Cracks
 In: International Journal for Numerical Methods in Engineering 63 (2005), S. 276-289
 ISSN: 0029-5981
 DOI: 10.1002/nme.1286
- , , :
 A finite element method for cohesive crack modelling
 Luxembourg, (28.03-)
 In: Proceedings GAMM'05 2005
 DOI: 10.1002/pamm.200410156
- , :
 A computational method for the FE simulation of strong and weak discontinuities
 Oberwolfach, (Germany)
 In: Proc. Workshop Gemischte und nicht-standard FE-Methoden 2005
2004
- , , :
 A Hybrid Discontinuous Galerkin Interface Method for the Computational Modelling of Failure
 In: Communications in Numerical Methods in Engineering 20 (2004), S. 511-519
 ISSN: 1069-8299
 DOI: 10.1002/cnm.689
- , , :
 A new approach for the FE modelling of cohesive cracks
 ICTAM XXI (Warszawa, Poland)
 In: Proceedings of 21st International Congress of Theoretical and Applied Mechanics 2004
2003
- , , :
 Modelling of failure with a hybrid dG/ interface approach
 Padua, (Italien)
 In: Proceedings GAMM'03 2003
- , , :
 Computational Modelling of Failure with the Discontinuous Galerkin Method
 LUXFEM I (Luxembourg, Luxembourg)
 In: Proceedings of the 1st International LUXFEM Conference 2003
 DOI: 10.1002/pamm.200310425
1992
- , :
 Adaptive Techniques for Localization Analysis
 Anaheim, (Anaheim, CA, USA, 8. November 1992 - 13. November 1992)
 In: Proceedings of ASME WAM'92 Symposium on Adaptive, Multilevel and Hierachical Computational Strategies, New York: 1992
- , :
 Localization Analysis in Finite Deformation Elasto-Plasticity
 peer reviewed, (Hannover, Germany)
 In: Proceedings of IUTAM Symposium on Finite Inelastic Deformations 1992
- , , , :
 Distributed Failure Analysis, Fallacies and Remedies
 San Antonio, (Texas, USA, 24. Mai 1992 - 27. Mai 1992)
 In: Proceedings of ASCE'92 Structures Congress X 1992
1991
- , , :
 Computational Aspects of Localized Failure Simulations in Plain Concrete
 In: Proceedings of International RILEM/ESIS Conference on Fracture Processes in Brittle Disordered Materials, London: 1991
- , :
 Finite Elements for Capturing Localized Failure
 In: Archive of Applied Mechanics 61 (1991), S. 259-275
 ISSN: 0939-1533
 DOI: 10.1007/BF00794351
- , :
 Localization in Micropolar Elasto-Plasticity
 Tucson
 In: Proceedings of the 3rd Int. Conf. on Constitutive Laws for Engineering Materials, New York: 1991
- , :
 Performance of Enhanced Finite Element Formulations in Localized Failure Computations
 In: Computer Methods in Applied Mechanics and Engineering 90 (1991), S. 845-867
 ISSN: 0045-7825
 DOI: 10.1016/0045-7825(91)90187-B
1990
- , :
 Computational Failure Mechanics : State-of-the Art and Future Trends
 IKOSS, (Baden-Baden, Germany)
 In: Proceedings of FEM' 90 Congress 1990

